sbgEComCmdOdo.c File Reference

#include "sbgEComCmdOdo.h"
#include <streamBuffer/sbgStreamBuffer.h>

Include dependency graph for sbgEComCmdOdo.c:

Go to the source code of this file.

Functions
SbgErrorCode	sbgEComCmdOdoCanGetConf (SbgEComHandle *pHandle, SbgEComCmdOdoCanChannel canChannel, SbgEComCmdOdoCanConf *pOdoCanConf)
SbgErrorCode	sbgEComCmdOdoCanSetConf (SbgEComHandle *pHandle, SbgEComCmdOdoCanChannel canChannel, const SbgEComCmdOdoCanConf *pOdoCanConf)
SbgErrorCode	sbgEComCmdOdoGetConf (SbgEComHandle *pHandle, SbgEComOdoConf *pOdometerConf)
SbgErrorCode	sbgEComCmdOdoGetLeverArm (SbgEComHandle *pHandle, float leverArm[3])
SbgErrorCode	sbgEComCmdOdoGetRejection (SbgEComHandle *pHandle, SbgEComOdoRejectionConf *pRejectConf)
SbgErrorCode	sbgEComCmdOdoSetConf (SbgEComHandle *pHandle, const SbgEComOdoConf *pOdometerConf)
SbgErrorCode	sbgEComCmdOdoSetLeverArm (SbgEComHandle *pHandle, const float leverArm[3])
SbgErrorCode	sbgEComCmdOdoSetRejection (SbgEComHandle *pHandle, const SbgEComOdoRejectionConf *pRejectConf)

Function Documentation

sbgEComCmdOdoCanGetConf()

SbgErrorCode sbgEComCmdOdoCanGetConf	(	SbgEComHandle *	pHandle,
		SbgEComCmdOdoCanChannel	canChannel,
		SbgEComCmdOdoCanConf *	pOdoCanConf
	)

Retrieve the CAN odometer configuration for a specific CAN information channel

Parameters

[in]	pHandle	A valid sbgECom handle.
[in]	canChannel	The CAN channel to retreive associated DBC configuration.
[out]	pOdoCanConf	Struct to hold configuration of the CAN odometer.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 415 of file sbgEComCmdOdo.c.

sbgEComCmdOdoCanSetConf()

SbgErrorCode sbgEComCmdOdoCanSetConf	(	SbgEComHandle *	pHandle,
		SbgEComCmdOdoCanChannel	canChannel,
		const SbgEComCmdOdoCanConf *	pOdoCanConf
	)

Set the CAN odometer configuration for a specific CAN information channel

Parameters

[in]	pHandle	A valid sbgECom handle.
[in]	canChannel	The CAN channel to define associated DBC configuration.
[in]	pOdoCanConf	Struct holding configuration for the CAN odometer.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 499 of file sbgEComCmdOdo.c.

sbgEComCmdOdoGetConf()

SbgErrorCode sbgEComCmdOdoGetConf	(	SbgEComHandle *	pHandle,
		SbgEComOdoConf *	pOdometerConf
	)

\file               sbgEComCmdOdo.c

Author

SBG Systems

\brief              This file implements SbgECom commands related to Odometer module.

\section CodeCopyright Copyright Notice 
Copyright (C) 2007-2019, SBG Systems SAS. All rights reserved.

This source code is intended for use only by SBG Systems SAS and
those that have explicit written permission to use it from
SBG Systems SAS.

THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE.

Definition at line 26 of file sbgEComCmdOdo.c.

sbgEComCmdOdoGetLeverArm()

SbgErrorCode sbgEComCmdOdoGetLeverArm	(	SbgEComHandle *	pHandle,
		float	leverArm[3]
	)

Retrieve the lever arm applicable for both quadrature or CAN based odometer.

Parameters

[in]	pHandle	A valid sbgECom handle.
[out]	leverArm	Array of three values, one for each axis.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 157 of file sbgEComCmdOdo.c.

sbgEComCmdOdoGetRejection()

SbgErrorCode sbgEComCmdOdoGetRejection	(	SbgEComHandle *	pHandle,
		SbgEComOdoRejectionConf *	pRejectConf
	)

Retrieve the velocity rejection configuration for both quadrature or CAN based odometer.

Parameters

[in]	pHandle	A valid sbgECom handle.
[out]	pRejectConf	Pointer to a SbgEComOdoRejectionConf struct to hold rejection configuration of the odometer module.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 288 of file sbgEComCmdOdo.c.

sbgEComCmdOdoSetConf()

SbgErrorCode sbgEComCmdOdoSetConf	(	SbgEComHandle *	pHandle,
		const SbgEComOdoConf *	pOdometerConf
	)

For quadrature and/or pulse base odometer, define the configuration.

Parameters

[in]	pHandle	A valid sbgECom handle.
[in]	pOdometerConf	Pointer to a SbgEComOdoConf struct holding configuration for the odometer module.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 92 of file sbgEComCmdOdo.c.

sbgEComCmdOdoSetLeverArm()

SbgErrorCode sbgEComCmdOdoSetLeverArm	(	SbgEComHandle *	pHandle,
		const float	leverArm[3]
	)

Set the lever arm applicable for both quadrature or CAN based odometer.

Parameters

[in]	pHandle	A valid sbgECom handle.
[in]	leverArm	Array of three values, one for each axis.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 223 of file sbgEComCmdOdo.c.

sbgEComCmdOdoSetRejection()

SbgErrorCode sbgEComCmdOdoSetRejection	(	SbgEComHandle *	pHandle,
		const SbgEComOdoRejectionConf *	pRejectConf
	)

Set the velocity rejection configuration for both quadrature or CAN based odometer.

Parameters

[in]	pHandle	A valid sbgECom handle.
[in]	pRejectConf	Pointer to a SbgEComOdoRejectionConf struct holding rejection configuration for the odometer module.

Returns

SBG_NO_ERROR if the command has been executed successfully.

Definition at line 352 of file sbgEComCmdOdo.c.