SMBUS Configuration Structure definition. More...

#include <stm32f4xx_hal_smbus.h>

Public Attributes
uint32_t	AddressingMode

uint32_t	AnalogFilter

uint32_t	ClockSpeed

uint32_t	DualAddressMode

uint32_t	GeneralCallMode

uint32_t	NoStretchMode

uint32_t	OwnAddress1

uint32_t	OwnAddress2

uint32_t	OwnAddress2Masks

uint32_t	PacketErrorCheckMode

uint32_t	PeripheralMode

uint32_t	SMBusTimeout

uint32_t	Timing

Detailed Description

SMBUS Configuration Structure definition.

Definition at line 47 of file stm32f4xx_hal_smbus.h.

Member Data Documentation

◆ AddressingMode

uint32_t SMBUS_InitTypeDef::AddressingMode

Specifies if 7-bit or 10-bit addressing mode is selected. This parameter can be a value of SMBUS addressing mode

Specifies if 7-bit or 10-bit addressing mode for master is selected. This parameter can be a value of SMBUS addressing mode

Definition at line 58 of file stm32f4xx_hal_smbus.h.

◆ AnalogFilter

uint32_t SMBUS_InitTypeDef::AnalogFilter

Specifies if Analog Filter is enable or not. This parameter can be a value of SMBUS Analog Filter

Definition at line 52 of file stm32f4xx_hal_smbus.h.

◆ ClockSpeed

uint32_t SMBUS_InitTypeDef::ClockSpeed

Specifies the clock frequency. This parameter must be set to a value lower than 100kHz

Definition at line 49 of file stm32f4xx_hal_smbus.h.

◆ DualAddressMode

uint32_t SMBUS_InitTypeDef::DualAddressMode

Specifies if dual addressing mode is selected. This parameter can be a value of SMBUS dual addressing mode

Definition at line 61 of file stm32f4xx_hal_smbus.h.

◆ GeneralCallMode

uint32_t SMBUS_InitTypeDef::GeneralCallMode

Specifies if general call mode is selected. This parameter can be a value of SMBUS general call addressing mode

Specifies if general call mode is selected. This parameter can be a value of SMBUS general call addressing mode.

Definition at line 67 of file stm32f4xx_hal_smbus.h.

◆ NoStretchMode

uint32_t SMBUS_InitTypeDef::NoStretchMode

Specifies if nostretch mode is selected. This parameter can be a value of SMBUS nostretch mode

Definition at line 70 of file stm32f4xx_hal_smbus.h.

◆ OwnAddress1

uint32_t SMBUS_InitTypeDef::OwnAddress1

Specifies the first device own address. This parameter can be a 7-bit or 10-bit address.

Definition at line 55 of file stm32f4xx_hal_smbus.h.

◆ OwnAddress2

uint32_t SMBUS_InitTypeDef::OwnAddress2

Specifies the second device own address if dual addressing mode is selected. This parameter can be a 7-bit address.

Specifies the second device own address if dual addressing mode is selected This parameter can be a 7-bit address.

Definition at line 64 of file stm32f4xx_hal_smbus.h.

◆ OwnAddress2Masks

uint32_t SMBUS_InitTypeDef::OwnAddress2Masks

Specifies the acknoledge mask address second device own address if dual addressing mode is selected This parameter can be a value of SMBUS ownaddress2 masks.

Definition at line 68 of file stm32f7xx_hal_smbus.h.

◆ PacketErrorCheckMode

uint32_t SMBUS_InitTypeDef::PacketErrorCheckMode

Specifies if Packet Error Check mode is selected. This parameter can be a value of SMBUS packet error check mode

Definition at line 73 of file stm32f4xx_hal_smbus.h.

◆ PeripheralMode

uint32_t SMBUS_InitTypeDef::PeripheralMode

Specifies which mode of Periphal is selected. This parameter can be a value of SMBUS peripheral mode

Definition at line 76 of file stm32f4xx_hal_smbus.h.

◆ SMBusTimeout

uint32_t SMBUS_InitTypeDef::SMBusTimeout

Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. (Enable bits and different timeout values) This parameter calculated by referring to SMBUS initialization section in Reference manual

Definition at line 83 of file stm32f7xx_hal_smbus.h.

◆ Timing

uint32_t SMBUS_InitTypeDef::Timing

Specifies the SMBUS_TIMINGR_register value. This parameter calculated by referring to SMBUS initialization section in Reference manual

Definition at line 50 of file stm32f7xx_hal_smbus.h.

The documentation for this struct was generated from the following files:

Public Attributes