Macros | Enumerations | Functions
stm32f4_discovery.h File Reference

This file contains definitions for STM32F4-Discovery Kit's Leds and push-button hardware resources. More...

#include "stm32f4xx_hal.h"
Include dependency graph for stm32f4_discovery.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

#define ACCELERO_CS_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
 
#define ACCELERO_CS_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
 
#define ACCELERO_CS_GPIO_PORT   GPIOE /* GPIOE */
 
#define ACCELERO_CS_HIGH()   HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_SET)
 
#define ACCELERO_CS_LOW()   HAL_GPIO_WritePin(ACCELERO_CS_GPIO_PORT, ACCELERO_CS_PIN, GPIO_PIN_RESET)
 
#define ACCELERO_CS_PIN   GPIO_PIN_3 /* PE.03 */
 ACCELEROMETER Interface pins. More...
 
#define ACCELERO_INT1_EXTI_IRQn   EXTI0_IRQn
 
#define ACCELERO_INT1_PIN   GPIO_PIN_0 /* PE.00 */
 
#define ACCELERO_INT2_EXTI_IRQn   EXTI1_IRQn
 
#define ACCELERO_INT2_PIN   GPIO_PIN_1 /* PE.01 */
 
#define ACCELERO_INT_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOE_CLK_DISABLE()
 
#define ACCELERO_INT_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOE_CLK_ENABLE()
 
#define ACCELERO_INT_GPIO_PORT   GPIOE /* GPIOE */
 
#define AUDIO_I2C_ADDRESS   0x94
 AUDIO I2C Interface pins. More...
 
#define AUDIO_RESET_GPIO   GPIOD
 
#define AUDIO_RESET_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
 
#define AUDIO_RESET_PIN   GPIO_PIN_4
 
#define BSP_I2C_SPEED   100000
 
#define BUTTONn   1
 
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__)
 
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__)
 
#define DISCOVERY_I2Cx   I2C1
 
#define DISCOVERY_I2Cx_CLK_ENABLE()   __HAL_RCC_I2C1_CLK_ENABLE()
 
#define DISCOVERY_I2Cx_ER_IRQn   I2C1_ER_IRQn
 
#define DISCOVERY_I2Cx_EV_IRQn   I2C1_EV_IRQn
 
#define DISCOVERY_I2Cx_FORCE_RESET()   __HAL_RCC_I2C1_FORCE_RESET()
 
#define DISCOVERY_I2Cx_RELEASE_RESET()   __HAL_RCC_I2C1_RELEASE_RESET()
 
#define DISCOVERY_I2Cx_SCL_PIN   GPIO_PIN_6
 
#define DISCOVERY_I2Cx_SCL_SDA_AF   GPIO_AF4_I2C1
 
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
 
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_PORT   GPIOB
 
#define DISCOVERY_I2Cx_SDA_PIN   GPIO_PIN_9
 
#define DISCOVERY_SPIx   SPI1
 
#define DISCOVERY_SPIx_AF   GPIO_AF5_SPI1
 
#define DISCOVERY_SPIx_CLK_ENABLE()   __HAL_RCC_SPI1_CLK_ENABLE()
 
#define DISCOVERY_SPIx_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
 
#define DISCOVERY_SPIx_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
 
#define DISCOVERY_SPIx_GPIO_PORT   GPIOA /* GPIOA */
 
#define DISCOVERY_SPIx_MISO_PIN   GPIO_PIN_6 /* PA.06 */
 
#define DISCOVERY_SPIx_MOSI_PIN   GPIO_PIN_7 /* PA.07 */
 
#define DISCOVERY_SPIx_SCK_PIN   GPIO_PIN_5 /* PA.05 */
 
#define DUMMY_BYTE   ((uint8_t)0x00)
 
#define I2Cx_TIMEOUT_MAX   0x1000 /*<! The value of the maximal timeout for BUS waiting loops */
 
#define KEY_BUTTON_EXTI_IRQn   EXTI0_IRQn
 
#define KEY_BUTTON_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
 
#define KEY_BUTTON_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
 
#define KEY_BUTTON_GPIO_PORT   GPIOA
 
#define KEY_BUTTON_PIN   GPIO_PIN_0
 Wakeup push-button. More...
 
#define LED3_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
 
#define LED3_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
 
#define LED3_GPIO_PORT   GPIOD
 
#define LED3_PIN   GPIO_PIN_13
 
#define LED4_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
 
#define LED4_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
 
#define LED4_GPIO_PORT   GPIOD
 
#define LED4_PIN   GPIO_PIN_12
 
#define LED5_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
 
#define LED5_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
 
#define LED5_GPIO_PORT   GPIOD
 
#define LED5_PIN   GPIO_PIN_14
 
#define LED6_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
 
#define LED6_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
 
#define LED6_GPIO_PORT   GPIOD
 
#define LED6_PIN   GPIO_PIN_15
 
#define LEDn   4
 
#define LEDx_GPIO_CLK_DISABLE(__INDEX__)
 
#define LEDx_GPIO_CLK_ENABLE(__INDEX__)
 
#define MULTIPLEBYTE_CMD   ((uint8_t)0x40)
 
#define READWRITE_CMD   ((uint8_t)0x80)
 
#define SPIx_TIMEOUT_MAX   0x1000 /*<! The value of the maximal timeout for BUS waiting loops */
 
#define USE_STM32F4_DISCO
 Define for STM32F4_DISCOVERY board
More...
 

Enumerations

enum  Button_TypeDef {
  BUTTON_KEY = 0, BUTTON_KEY = 0, BUTTON_WAKEUP = 0, BUTTON_WAKEUP = 0,
  BUTTON_WAKEUP = 0U, BUTTONn
}
 
enum  ButtonMode_TypeDef {
  BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1, BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1,
  BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1, BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1,
  BUTTON_MODE_GPIO = 0U, BUTTON_MODE_EXTI = 1U
}
 
enum  Led_TypeDef {
  LED4 = 0, LED3 = 1, LED5 = 2, LED6 = 3,
  LED4 = 0, LED3 = 1, LED5 = 2, LED6 = 3,
  LED1 = 0, LED_GREEN = LED1, LED2 = 1, LED_ORANGE = LED2,
  LED3 = 2, LED_RED = LED3, LED4 = 3, LED_BLUE = LED4,
  LED1 = 0, LED_RED = LED1, LED2 = 1, LED_GREEN = LED2,
  LED1 = 0U, LED_GREEN = LED1, LED2 = 1U, LED_ORANGE = LED2,
  LED3 = 2U, LED_RED = LED3, LED4 = 3U, LED_BLUE = LED4,
  LEDn
}
 

Functions

uint32_t BSP_GetVersion (void)
 This method returns the STM32F4 DISCO BSP Driver revision. More...
 
void BSP_LED_Init (Led_TypeDef Led)
 Configures LED GPIO. More...
 
void BSP_LED_Off (Led_TypeDef Led)
 Turns selected LED Off. More...
 
void BSP_LED_On (Led_TypeDef Led)
 Turns selected LED On. More...
 
void BSP_LED_Toggle (Led_TypeDef Led)
 Toggles the selected LED. More...
 
uint32_t BSP_PB_GetState (Button_TypeDef Button)
 Returns the selected Button state. More...
 
void BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Mode)
 Configures Button GPIO and EXTI Line. More...
 

Detailed Description

This file contains definitions for STM32F4-Discovery Kit's Leds and push-button hardware resources.

Author
MCD Application Team
Attention

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f4_discovery.h.



picovoice_driver
Author(s):
autogenerated on Fri Apr 1 2022 02:15:01