Macros | Functions
stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h File Reference

HAL configuration file. More...

#include "stm32f4xx_hal_rcc.h"
#include "stm32f4xx_hal_gpio.h"
#include "stm32f4xx_hal_dma.h"
#include "stm32f4xx_hal_cortex.h"
#include "stm32f4xx_hal_flash.h"
#include "stm32f4xx_hal_i2c.h"
#include "stm32f4xx_hal_i2s.h"
#include "stm32f4xx_hal_ltdc.h"
#include "stm32f4xx_hal_pwr.h"
#include "stm32f4xx_hal_sai.h"
#include "stm32f4xx_hal_tim.h"
#include "stm32f4xx_hal_uart.h"
#include "stm32f4xx_hal_dsi.h"
Include dependency graph for stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

#define assert_param(expr)   ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 Include module's header file. More...
 
#define DATA_CACHE_ENABLE   1U
 
#define EXTERNAL_CLOCK_VALUE   (12288000U)
 External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad. More...
 
#define HAL_CORTEX_MODULE_ENABLED
 
#define HAL_DMA_MODULE_ENABLED
 
#define HAL_DSI_MODULE_ENABLED
 
#define HAL_FLASH_MODULE_ENABLED
 
#define HAL_GPIO_MODULE_ENABLED
 
#define HAL_I2C_MODULE_ENABLED
 
#define HAL_I2S_MODULE_ENABLED
 
#define HAL_LTDC_MODULE_ENABLED
 
#define HAL_MODULE_ENABLED
 This is the list of modules to be used in the HAL driver. More...
 
#define HAL_PWR_MODULE_ENABLED
 
#define HAL_RCC_MODULE_ENABLED
 
#define HAL_SAI_MODULE_ENABLED
 
#define HAL_TIM_MODULE_ENABLED
 
#define HAL_UART_MODULE_ENABLED
 
#define HSE_STARTUP_TIMEOUT   (100U)
 
#define HSE_VALUE   (8000000U)
 Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).
More...
 
#define HSI_VALUE   (16000000U)
 Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). More...
 
#define INSTRUCTION_CACHE_ENABLE   1
 
#define LSE_STARTUP_TIMEOUT   (5000U)
 
#define LSE_VALUE   (32768U)
 External Low Speed oscillator (LSE) value. More...
 
#define LSI_VALUE   (40000U)
 Internal Low Speed oscillator (LSI) value. More...
 
#define PREFETCH_ENABLE   1
 
#define TICK_INT_PRIORITY   (0x0FU)
 
#define USE_FULL_ASSERT   1
 Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code. More...
 
#define USE_HAL_ADC_REGISTER_CALLBACKS   0U /* ADC register callback disabled */
 
#define USE_HAL_CAN_REGISTER_CALLBACKS   0U /* CAN register callback disabled */
 
#define USE_HAL_CEC_REGISTER_CALLBACKS   0U /* CEC register callback disabled */
 
#define USE_HAL_CRYP_REGISTER_CALLBACKS   0U /* CRYP register callback disabled */
 
#define USE_HAL_DAC_REGISTER_CALLBACKS   0U /* DAC register callback disabled */
 
#define USE_HAL_DCMI_REGISTER_CALLBACKS   0U /* DCMI register callback disabled */
 
#define USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled */
 
#define USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled */
 
#define USE_HAL_DSI_REGISTER_CALLBACKS   0U /* DSI register callback disabled */
 
#define USE_HAL_ETH_REGISTER_CALLBACKS   0U /* ETH register callback disabled */
 
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS   0U /* FMPI2C register callback disabled */
 
#define USE_HAL_HASH_REGISTER_CALLBACKS   0U /* HASH register callback disabled */
 
#define USE_HAL_HCD_REGISTER_CALLBACKS   0U /* HCD register callback disabled */
 
#define USE_HAL_I2C_REGISTER_CALLBACKS   0U /* I2C register callback disabled */
 
#define USE_HAL_I2S_REGISTER_CALLBACKS   0U /* I2S register callback disabled */
 
#define USE_HAL_IRDA_REGISTER_CALLBACKS   0U /* IRDA register callback disabled */
 
#define USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled */
 
#define USE_HAL_LTDC_REGISTER_CALLBACKS   0U /* LTDC register callback disabled */
 
#define USE_HAL_MMC_REGISTER_CALLBACKS   0U /* MMC register callback disabled */
 
#define USE_HAL_NAND_REGISTER_CALLBACKS   0U /* NAND register callback disabled */
 
#define USE_HAL_NOR_REGISTER_CALLBACKS   0U /* NOR register callback disabled */
 
#define USE_HAL_PCCARD_REGISTER_CALLBACKS   0U /* PCCARD register callback disabled */
 
#define USE_HAL_PCD_REGISTER_CALLBACKS   0U /* PCD register callback disabled */
 
#define USE_HAL_QSPI_REGISTER_CALLBACKS   0U /* QSPI register callback disabled */
 
#define USE_HAL_RNG_REGISTER_CALLBACKS   0U /* RNG register callback disabled */
 
#define USE_HAL_RTC_REGISTER_CALLBACKS   0U /* RTC register callback disabled */
 
#define USE_HAL_SAI_REGISTER_CALLBACKS   0U /* SAI register callback disabled */
 
#define USE_HAL_SD_REGISTER_CALLBACKS   0U /* SD register callback disabled */
 
#define USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled */
 
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
 
#define USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled */
 
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS   0U /* SPDIFRX register callback disabled */
 
#define USE_HAL_SPI_REGISTER_CALLBACKS   0U /* SPI register callback disabled */
 
#define USE_HAL_SRAM_REGISTER_CALLBACKS   0U /* SRAM register callback disabled */
 
#define USE_HAL_TIM_REGISTER_CALLBACKS   0U /* TIM register callback disabled */
 
#define USE_HAL_UART_REGISTER_CALLBACKS   0U /* UART register callback disabled */
 
#define USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled */
 
#define USE_HAL_WWDG_REGISTER_CALLBACKS   0U /* WWDG register callback disabled */
 
#define USE_RTOS   0
 
#define USE_SPI_CRC   1U
 
#define VDD_VALUE   (3300U)
 This is the HAL system configuration section. More...
 

Functions

void assert_failed (uint8_t *file, uint32_t line)
 

Detailed Description

HAL configuration file.

Author
MCD Application Team
Attention

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

Macro Definition Documentation

◆ assert_param

#define assert_param (   expr)    ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))

Include module's header file.

The assert_param macro is used for function's parameters check.

Parameters
exprIf expr is false, it calls assert_failed function which reports the name of the source file and the source line number of the call that failed. If expr is true, it returns no value.
Return values
None

Definition at line 365 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ DATA_CACHE_ENABLE

#define DATA_CACHE_ENABLE   1U

◆ EXTERNAL_CLOCK_VALUE

#define EXTERNAL_CLOCK_VALUE   (12288000U)

External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.

Value of the external oscillator in Hz

Definition at line 119 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ HAL_CORTEX_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

◆ HAL_DMA_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

◆ HAL_DSI_MODULE_ENABLED

#define HAL_DSI_MODULE_ENABLED

◆ HAL_FLASH_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

◆ HAL_GPIO_MODULE_ENABLED

#define HAL_GPIO_MODULE_ENABLED

◆ HAL_I2C_MODULE_ENABLED

#define HAL_I2C_MODULE_ENABLED

◆ HAL_I2S_MODULE_ENABLED

#define HAL_I2S_MODULE_ENABLED

◆ HAL_LTDC_MODULE_ENABLED

#define HAL_LTDC_MODULE_ENABLED

◆ HAL_MODULE_ENABLED

#define HAL_MODULE_ENABLED

This is the list of modules to be used in the HAL driver.

Definition at line 51 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ HAL_PWR_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

◆ HAL_RCC_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

◆ HAL_SAI_MODULE_ENABLED

#define HAL_SAI_MODULE_ENABLED

◆ HAL_TIM_MODULE_ENABLED

#define HAL_TIM_MODULE_ENABLED

◆ HAL_UART_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT   (100U)

Time out for HSE start up, in ms

Definition at line 82 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ HSE_VALUE

#define HSE_VALUE   (8000000U)

Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).

Default value of the External oscillator in Hz

Definition at line 77 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ HSI_VALUE

#define HSI_VALUE   (16000000U)

Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL).

Value of the Internal oscillator in Hz

Definition at line 91 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ INSTRUCTION_CACHE_ENABLE

#define INSTRUCTION_CACHE_ENABLE   1

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT   (5000U)

Time out for LSE start up, in ms

Definition at line 110 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ LSE_VALUE

#define LSE_VALUE   (32768U)

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.
Value of the External Low Speed oscillator in Hz

Definition at line 106 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ LSI_VALUE

#define LSI_VALUE   (40000U)

Internal Low Speed oscillator (LSI) value.

Definition at line 98 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ PREFETCH_ENABLE

#define PREFETCH_ENABLE   1

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY   (0x0FU)

tick interrupt priority

Definition at line 130 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ USE_FULL_ASSERT

#define USE_FULL_ASSERT   1

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Definition at line 180 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

◆ USE_HAL_ADC_REGISTER_CALLBACKS

#define USE_HAL_ADC_REGISTER_CALLBACKS   0U /* ADC register callback disabled */

◆ USE_HAL_CAN_REGISTER_CALLBACKS

#define USE_HAL_CAN_REGISTER_CALLBACKS   0U /* CAN register callback disabled */

◆ USE_HAL_CEC_REGISTER_CALLBACKS

#define USE_HAL_CEC_REGISTER_CALLBACKS   0U /* CEC register callback disabled */

◆ USE_HAL_CRYP_REGISTER_CALLBACKS

#define USE_HAL_CRYP_REGISTER_CALLBACKS   0U /* CRYP register callback disabled */

◆ USE_HAL_DAC_REGISTER_CALLBACKS

#define USE_HAL_DAC_REGISTER_CALLBACKS   0U /* DAC register callback disabled */

◆ USE_HAL_DCMI_REGISTER_CALLBACKS

#define USE_HAL_DCMI_REGISTER_CALLBACKS   0U /* DCMI register callback disabled */

◆ USE_HAL_DFSDM_REGISTER_CALLBACKS

#define USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled */

◆ USE_HAL_DMA2D_REGISTER_CALLBACKS

#define USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled */

◆ USE_HAL_DSI_REGISTER_CALLBACKS

#define USE_HAL_DSI_REGISTER_CALLBACKS   0U /* DSI register callback disabled */

◆ USE_HAL_ETH_REGISTER_CALLBACKS

#define USE_HAL_ETH_REGISTER_CALLBACKS   0U /* ETH register callback disabled */

◆ USE_HAL_FMPI2C_REGISTER_CALLBACKS

#define USE_HAL_FMPI2C_REGISTER_CALLBACKS   0U /* FMPI2C register callback disabled */

◆ USE_HAL_HASH_REGISTER_CALLBACKS

#define USE_HAL_HASH_REGISTER_CALLBACKS   0U /* HASH register callback disabled */

◆ USE_HAL_HCD_REGISTER_CALLBACKS

#define USE_HAL_HCD_REGISTER_CALLBACKS   0U /* HCD register callback disabled */

◆ USE_HAL_I2C_REGISTER_CALLBACKS

#define USE_HAL_I2C_REGISTER_CALLBACKS   0U /* I2C register callback disabled */

◆ USE_HAL_I2S_REGISTER_CALLBACKS

#define USE_HAL_I2S_REGISTER_CALLBACKS   0U /* I2S register callback disabled */

◆ USE_HAL_IRDA_REGISTER_CALLBACKS

#define USE_HAL_IRDA_REGISTER_CALLBACKS   0U /* IRDA register callback disabled */

◆ USE_HAL_LPTIM_REGISTER_CALLBACKS

#define USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled */

◆ USE_HAL_LTDC_REGISTER_CALLBACKS

#define USE_HAL_LTDC_REGISTER_CALLBACKS   0U /* LTDC register callback disabled */

◆ USE_HAL_MMC_REGISTER_CALLBACKS

#define USE_HAL_MMC_REGISTER_CALLBACKS   0U /* MMC register callback disabled */

◆ USE_HAL_NAND_REGISTER_CALLBACKS

#define USE_HAL_NAND_REGISTER_CALLBACKS   0U /* NAND register callback disabled */

◆ USE_HAL_NOR_REGISTER_CALLBACKS

#define USE_HAL_NOR_REGISTER_CALLBACKS   0U /* NOR register callback disabled */

◆ USE_HAL_PCCARD_REGISTER_CALLBACKS

#define USE_HAL_PCCARD_REGISTER_CALLBACKS   0U /* PCCARD register callback disabled */

◆ USE_HAL_PCD_REGISTER_CALLBACKS

#define USE_HAL_PCD_REGISTER_CALLBACKS   0U /* PCD register callback disabled */

◆ USE_HAL_QSPI_REGISTER_CALLBACKS

#define USE_HAL_QSPI_REGISTER_CALLBACKS   0U /* QSPI register callback disabled */

◆ USE_HAL_RNG_REGISTER_CALLBACKS

#define USE_HAL_RNG_REGISTER_CALLBACKS   0U /* RNG register callback disabled */

◆ USE_HAL_RTC_REGISTER_CALLBACKS

#define USE_HAL_RTC_REGISTER_CALLBACKS   0U /* RTC register callback disabled */

◆ USE_HAL_SAI_REGISTER_CALLBACKS

#define USE_HAL_SAI_REGISTER_CALLBACKS   0U /* SAI register callback disabled */

◆ USE_HAL_SD_REGISTER_CALLBACKS

#define USE_HAL_SD_REGISTER_CALLBACKS   0U /* SD register callback disabled */

◆ USE_HAL_SDRAM_REGISTER_CALLBACKS

#define USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled */

◆ USE_HAL_SMARTCARD_REGISTER_CALLBACKS

#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */

◆ USE_HAL_SMBUS_REGISTER_CALLBACKS

#define USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled */

◆ USE_HAL_SPDIFRX_REGISTER_CALLBACKS

#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS   0U /* SPDIFRX register callback disabled */

◆ USE_HAL_SPI_REGISTER_CALLBACKS

#define USE_HAL_SPI_REGISTER_CALLBACKS   0U /* SPI register callback disabled */

◆ USE_HAL_SRAM_REGISTER_CALLBACKS

#define USE_HAL_SRAM_REGISTER_CALLBACKS   0U /* SRAM register callback disabled */

◆ USE_HAL_TIM_REGISTER_CALLBACKS

#define USE_HAL_TIM_REGISTER_CALLBACKS   0U /* TIM register callback disabled */

◆ USE_HAL_UART_REGISTER_CALLBACKS

#define USE_HAL_UART_REGISTER_CALLBACKS   0U /* UART register callback disabled */

◆ USE_HAL_USART_REGISTER_CALLBACKS

#define USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled */

◆ USE_HAL_WWDG_REGISTER_CALLBACKS

#define USE_HAL_WWDG_REGISTER_CALLBACKS   0U /* WWDG register callback disabled */

◆ USE_RTOS

#define USE_RTOS   0

◆ USE_SPI_CRC

#define USE_SPI_CRC   1U

◆ VDD_VALUE

#define VDD_VALUE   (3300U)

This is the HAL system configuration section.

Value of VDD in mv

Definition at line 129 of file stm32f469/stm32f469i-disco/Inc/stm32f4xx_hal_conf.h.

Function Documentation

◆ assert_failed()

void assert_failed ( uint8_t *  file,
uint32_t  line 
)

Definition at line 88 of file pv_st_f407.c.



picovoice_driver
Author(s):
autogenerated on Fri Apr 1 2022 02:15:01