Collaboration diagram for STM32F769I_DISCOVERY_AUDIO_OUT Exported Functions:

Functions
void	BSP_AUDIO_OUT_ChangeBuffer (uint16_t *pData, uint16_t Size)
	Sends n-Bytes on the I2S interface. More...

void	BSP_AUDIO_OUT_ClockConfig (SAI_HandleTypeDef hsai, uint32_t AudioFreq, void Params)
	Clock Config. More...

void	BSP_AUDIO_OUT_DeInit (void)
	Deinit the audio peripherals. More...

void	BSP_AUDIO_OUT_Error_CallBack (void)
	Manages the DMA FIFO error event. More...

void	BSP_AUDIO_OUT_HalfTransfer_CallBack (void)
	Manages the DMA Half Transfer complete event. More...

uint8_t	BSP_AUDIO_OUT_Init (uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
	Configures the audio peripherals. More...

void	BSP_AUDIO_OUT_MspDeInit (SAI_HandleTypeDef hsai, void Params)
	Deinitializes BSP_AUDIO_OUT MSP. More...

void	BSP_AUDIO_OUT_MspInit (SAI_HandleTypeDef hsai, void Params)
	Initializes BSP_AUDIO_OUT MSP. More...

uint8_t	BSP_AUDIO_OUT_Pause (void)
	Pauses the audio file stream. In case of using DMA, the DMA Pause feature is used. WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only the BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior). More...

uint8_t	BSP_AUDIO_OUT_Play (uint16_t *pBuffer, uint32_t Size)
	Starts playing audio stream from a data buffer for a determined size. More...

uint8_t	BSP_AUDIO_OUT_Resume (void)
	Resumes the audio file streaming. WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior). More...

void	BSP_AUDIO_OUT_SetAudioFrameSlot (uint32_t AudioFrameSlot)
	Updates the Audio frame slot configuration. More...

void	BSP_AUDIO_OUT_SetFrequency (uint32_t AudioFreq)
	Update the audio frequency. More...

uint8_t	BSP_AUDIO_OUT_SetMute (uint32_t Cmd)
	Enables or disables the MUTE mode by software. More...

uint8_t	BSP_AUDIO_OUT_SetOutputMode (uint8_t Output)
	Switch dynamically (while audio file is played) the output target (speaker or headphone). More...

uint8_t	BSP_AUDIO_OUT_SetVolume (uint8_t Volume)
	Controls the current audio volume level. More...

uint8_t	BSP_AUDIO_OUT_Stop (uint32_t Option)
	Stops audio playing and Power down the Audio Codec. More...

void	BSP_AUDIO_OUT_TransferComplete_CallBack (void)
	Manages the DMA full Transfer complete event. More...

Detailed Description

Function Documentation

◆ BSP_AUDIO_OUT_ChangeBuffer()

void BSP_AUDIO_OUT_ChangeBuffer	(	uint16_t *	pData,
		uint16_t	Size
	)

Sends n-Bytes on the I2S interface.

Parameters

pData	Pointer to data address
Size	Number of data to be written

Sends n-Bytes on the I2S interface.

Parameters

pData	pointer on PCM samples buffer
Size	number of data to be written

Sends n-Bytes on the I2S interface.

Parameters

pData	pointer on data address
Size	number of data to be written

Return values

None

Definition at line 288 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_ClockConfig()

void BSP_AUDIO_OUT_ClockConfig	(	SAI_HandleTypeDef *	hsai,
		uint32_t	AudioFreq,
		void *	Params
	)

Clock Config.

Parameters

hsai	might be required to set audio peripheral predivider if any.
AudioFreq	Audio frequency used to play the audio stream.

Note: This API is called by BSP_AUDIO_OUT_Init() and BSP_AUDIO_OUT_SetFrequency() Being __weak it can be overwritten by the application

Parameters

Params	: pointer on additional configuration parameters, can be NULL.
hsai	might be required to set audio peripheral predivider if any.
AudioFreq	Audio frequency used to play the audio stream.
Params

Note: This API is called by BSP_AUDIO_OUT_Init() and BSP_AUDIO_OUT_SetFrequency() Being __weak it can be overwritten by the application

Return values

None

Definition at line 783 of file stm32469i_discovery_audio.c.

◆ BSP_AUDIO_OUT_DeInit()

void BSP_AUDIO_OUT_DeInit ( void )

Deinit the audio peripherals.

Return values

None

Definition at line 592 of file stm32469i_discovery_audio.c.

◆ BSP_AUDIO_OUT_Error_CallBack()

void BSP_AUDIO_OUT_Error_CallBack ( void )

Manages the DMA FIFO error event.

Return values

None

Definition at line 651 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_HalfTransfer_CallBack()

void BSP_AUDIO_OUT_HalfTransfer_CallBack ( void )

Manages the DMA Half Transfer complete event.

Return values

None

Definition at line 644 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_Init()

uint8_t BSP_AUDIO_OUT_Init	(	uint16_t	OutputDevice,
		uint8_t	Volume,
		uint32_t	AudioFreq
	)

Configures the audio peripherals.

Parameters

OutputDevice	OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, OUTPUT_DEVICE_BOTH or OUTPUT_DEVICE_AUTO .
Volume	Initial volume level (from 0 (Mute) to 100 (Max))
AudioFreq	Audio frequency used to play the audio stream.

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

OutputDevice	OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, or OUTPUT_DEVICE_BOTH.
Volume	Initial volume level (from 0 (Mute) to 100 (Max))
AudioFreq	Audio frequency used to play the audio stream.

Note: The SAI PLL input clock must be done in the user application.

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

OutputDevice	OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, or OUTPUT_DEVICE_BOTH.
Volume	Initial volume level (from 0 (Mute) to 100 (Max))
AudioFreq	Audio frequency used to play the audio stream.

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 214 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_MspDeInit()

void BSP_AUDIO_OUT_MspDeInit	(	SAI_HandleTypeDef *	hsai,
		void *	Params
	)

Deinitializes BSP_AUDIO_OUT MSP.

Parameters

hsai	SAI handle
Params	: pointer on additional configuration parameters, can be NULL.

Deinitializes BSP_AUDIO_OUT MSP.

Parameters

hsai	SAI handle
Params

Return values

None

Definition at line 737 of file stm32469i_discovery_audio.c.

◆ BSP_AUDIO_OUT_MspInit()

void BSP_AUDIO_OUT_MspInit	(	SAI_HandleTypeDef *	hsai,
		void *	Params
	)

Initializes BSP_AUDIO_OUT MSP.

Parameters

hsai	SAI handle
Params	: pointer on additional configuration parameters, can be NULL.
hsai	SAI handle
Params

Return values

None

Definition at line 659 of file stm32469i_discovery_audio.c.

◆ BSP_AUDIO_OUT_Pause()

uint8_t BSP_AUDIO_OUT_Pause ( void )

Pauses the audio file stream. In case of using DMA, the DMA Pause feature is used. WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only the BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Return values

AUDIO_OK if correct communication, else wrong communication

Pauses the audio file stream. In case of using DMA, the DMA Pause feature is used. WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only the BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Warning: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Return values

AUDIO_OK if correct communication, else wrong communication

Pauses the audio file stream. In case of using DMA, the DMA Pause feature is used. WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only the BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Note: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behaviour).

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 301 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_Play()

uint8_t BSP_AUDIO_OUT_Play	(	uint16_t *	pBuffer,
		uint32_t	Size
	)

Starts playing audio stream from a data buffer for a determined size.

Parameters

pBuffer	Pointer to the buffer
Size	Number of audio data BYTES.

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 266 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_Resume()

uint8_t BSP_AUDIO_OUT_Resume ( void )

Resumes the audio file streaming.
WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Return values

AUDIO_OK if correct communication, else wrong communication

Resumes the audio file streaming.
WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Return values

AUDIO_OK if correct communication, else wrong communication

Resumes the audio file streaming.
WARNING: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behavior).

Note: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behaviour).

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 325 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_SetAudioFrameSlot()

void BSP_AUDIO_OUT_SetAudioFrameSlot ( uint32_t AudioFrameSlot )

Updates the Audio frame slot configuration.

Parameters

AudioFrameSlot specifies the audio Frame slot This parameter can be any value of STM32469I Discovery Audio Slot TDM mode

Note: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frame slot.

Parameters

AudioFrameSlot specifies the audio Frame slot

Note: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frame slot.

Return values

None

Definition at line 576 of file stm32469i_discovery_audio.c.

◆ BSP_AUDIO_OUT_SetFrequency()

void BSP_AUDIO_OUT_SetFrequency ( uint32_t AudioFreq )

Update the audio frequency.

Parameters

AudioFreq Audio frequency used to play the audio stream.

Note: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frequency.

Update the audio frequency.

Parameters

AudioFreq Audio frequency used to play the audio stream.

Note: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frequency.

Update the audio frequency.

Parameters

AudioFreq Audio frequency used to play the audio stream.

Note: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frequency.

Return values

None

Definition at line 443 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_SetMute()

uint8_t BSP_AUDIO_OUT_SetMute ( uint32_t Cmd )

Enables or disables the MUTE mode by software.

Parameters

Cmd	could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to unmute the codec and restore previous volume level.

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

Cmd	Could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to unmute the codec and restore previous volume level.

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 401 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_SetOutputMode()

uint8_t BSP_AUDIO_OUT_SetOutputMode ( uint8_t Output )

Switch dynamically (while audio file is played) the output target (speaker or headphone).

Note: This function modifies a global variable of the audio codec driver: OutputDev.

Parameters

Output specifies the audio output target: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, OUTPUT_DEVICE_BOTH or OUTPUT_DEVICE_AUTO

Return values

AUDIO_OK if correct communication, else wrong communication

Switch dynamically (while audio file is played) the output target (speaker or headphone).

Parameters

Output The audio output target: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

Output The audio output target: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 423 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_SetVolume()

uint8_t BSP_AUDIO_OUT_SetVolume ( uint8_t Volume )

Controls the current audio volume level.

Parameters

Volume Volume level to be set in percentage from 0% to 100% (0 for Mute and 100 for Max volume level).

Return values

AUDIO_OK if correct communication, else wrong communication

Definition at line 381 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_Stop()

uint8_t BSP_AUDIO_OUT_Stop ( uint32_t Option )

Stops audio playing and Power down the Audio Codec.

Parameters

Option

could be one of the following parameters

CODEC_PDWN_HW: completely shut down the codec (physically). Then need to reconfigure the Codec after power on.

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

Option

could be one of the following parameters

CODEC_PDWN_SW: for software power off (by writing registers). Then no need to reconfigure the Codec after power on.
CODEC_PDWN_HW: completely shut down the codec (physically). Then need to reconfigure the Codec after power on.

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

Option

could be one of the following parameters

CODEC_PDWN_SW: for software power off (by writing registers). Then no need to reconfigure the Codec after power on.
CODEC_PDWN_HW: completely shut down the codec (physically). Then need to reconfigure the Codec after power on.

Return values

AUDIO_OK if correct communication, else wrong communication

Parameters

Instance : AUDIO OUT Instance. It can only be 0 (SAI)

Return values

BSP status

Definition at line 349 of file stm32f4_discovery_audio.c.

◆ BSP_AUDIO_OUT_TransferComplete_CallBack()

void BSP_AUDIO_OUT_TransferComplete_CallBack ( void )

Manages the DMA full Transfer complete event.

Return values

None

Definition at line 637 of file stm32f4_discovery_audio.c.