Collaboration diagram for RTCEx Exported Macros:

Modules
	RTC WakeUp Timer

	RTC Timestamp

	RTC Tamper

	EXTI RTC Tamper Timestamp EXTI

	RTC Calibration

Macros
#define	__HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
	Disable the calibration output. More...

#define	__HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_COE))
	Enable the RTC calibration output. More...

#define	__HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
	Disable the clock reference detection. More...

#define	__HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_REFCKON))
	Enable the clock reference detection. More...

#define	__HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) \| RTC_ISR_INIT)& 0x0003FFFF)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
	Clear the RTC Internal Time Stamp's pending flags. More...

#define	__HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))
	Disable the RTC internal TimeStamp peripheral. More...

#define	__HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_ITSE))
	Enable the RTC internal TimeStamp peripheral. More...

#define	__HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
	Get the selected RTC Internal Time Stamp's flag status. More...

#define	__HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
	Get the selected RTC shift operation's flag status. More...

#define	__HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
	Disable the RTC Tamper1 input detection. More...

#define	__HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR \|= (RTC_TAMPCR_TAMP1E))
	Enable the RTC Tamper1 input detection. More...

#define	__HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
	Disable the RTC Tamper2 input detection. More...

#define	__HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR \|= (RTC_TAMPCR_TAMP2E))
	Enable the RTC Tamper2 input detection. More...

#define	__HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
	Disable the RTC Tamper3 input detection. More...

#define	__HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR \|= (RTC_TAMPCR_TAMP3E))
	Enable the RTC Tamper3 input detection. More...

#define	__HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
	Clear the RTC Tamper's pending flags. More...

#define	__HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
	Get the selected RTC Tamper's flag status. More...

#define	__HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)
	Check whether the specified RTC Tamper interrupt has occurred or not. More...

#define	__HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
	Check whether the specified RTC Tamper interrupt has been enabled or not. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Clear the RTC Tamper and Timestamp associated Exti line flag. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
	Disable event on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
	Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
	Disable interrupt on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
	Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
	Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. This parameter can be: More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR \|= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Enable event on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR \|= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR \|= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Enable interrupt on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR \|= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
	Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER \|= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line. More...

#define	__HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
	Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. More...

#define	__HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
	Clear the RTC Time Stamp's pending flags. More...

#define	__HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
	Disable the RTC TimeStamp peripheral. More...

#define	__HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
	Disable the RTC TimeStamp interrupt. More...

#define	__HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_TSE))
	Enable the RTC TimeStamp peripheral. More...

#define	__HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR \|= (__INTERRUPT__))
	Enable the RTC TimeStamp interrupt. More...

#define	__HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
	Get the selected RTC TimeStamp's flag status. More...

#define	__HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
	Check whether the specified RTC TimeStamp interrupt has occurred or not. More...

#define	__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
	Check whether the specified RTC Time Stamp interrupt has been enabled or not. More...

#define	__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
	Clear the RTC Wake Up timer's pending flags. More...

#define	__HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
	Disable the RTC WakeUp Timer peripheral. More...

#define	__HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
	Disable the RTC WakeUpTimer interrupt. More...

#define	__HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_WUTE))
	Enable the RTC WakeUp Timer peripheral. More...

#define	__HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR \|= (__INTERRUPT__))
	Enable the RTC WakeUpTimer interrupt. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Clear the RTC WakeUp Timer associated Exti line flag. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable event on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable interrupt on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
	Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. This parameter can be: More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable event on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable interrupt on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
	Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. More...

#define	__HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. More...

#define	__HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
	Get the selected RTC WakeUpTimer's flag status. More...

#define	__HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
	Check whether the specified RTC WakeUpTimer interrupt has occurred or not. More...

#define	__HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
	Check whether the specified RTC Wake Up timer interrupt has been enabled or not. More...

Detailed Description

Macro Definition Documentation

◆ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE

#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))

Disable the calibration output.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 634 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE

#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))

Enable the RTC calibration output.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 627 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_CLOCKREF_DETECTION_DISABLE

#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))

Disable the clock reference detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 648 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_CLOCKREF_DETECTION_ENABLE

#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))

Enable the clock reference detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 641 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG

#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) \| RTC_ISR_INIT)& 0x0003FFFF)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Internal Time Stamp's pending flags.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC Internal Time Stamp Flag source to clear. This parameter can be: RTC_FLAG_ITSF

Return values

None

Definition at line 620 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE

#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))

Disable the RTC internal TimeStamp peripheral.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 600 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE

#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))

Enable the RTC internal TimeStamp peripheral.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 593 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG

#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)

Get the selected RTC Internal Time Stamp's flag status.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC Internal Time Stamp Flag is pending or not. This parameter can be: RTC_FLAG_ITSF

Return values

None

Definition at line 610 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_SHIFT_GET_FLAG

#define __HAL_RTC_SHIFT_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)

Get the selected RTC shift operation's flag status.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC shift operation Flag is pending or not. This parameter can be: RTC_FLAG_SHPF

Return values

None

Definition at line 658 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER1_DISABLE

#define __HAL_RTC_TAMPER1_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))

Disable the RTC Tamper1 input detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 430 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER1_ENABLE

#define __HAL_RTC_TAMPER1_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))

Enable the RTC Tamper1 input detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 423 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER2_DISABLE

#define __HAL_RTC_TAMPER2_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))

Disable the RTC Tamper2 input detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 444 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER2_ENABLE

#define __HAL_RTC_TAMPER2_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))

Enable the RTC Tamper2 input detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 437 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER3_DISABLE

#define __HAL_RTC_TAMPER3_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))

Disable the RTC Tamper3 input detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 458 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER3_ENABLE

#define __HAL_RTC_TAMPER3_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))

Enable the RTC Tamper3 input detection.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 451 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_CLEAR_FLAG

#define __HAL_RTC_TAMPER_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Tamper's pending flags.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC Tamper Flag sources to clear. This parameter can be: RTC_FLAG_TAMP1F: Tamper1 flag RTC_FLAG_TAMP2F: Tamper2 flag RTC_FLAG_TAMP3F: Tamper3 flag

Return values

None

Definition at line 510 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_FLAG

#define __HAL_RTC_TAMPER_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)

Get the selected RTC Tamper's flag status.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC Tamper Flag is pending or not. This parameter can be: RTC_FLAG_TAMP1F: Tamper1 flag RTC_FLAG_TAMP2F: Tamper2 flag RTC_FLAG_TAMP3F: Tamper3 flag

Return values

None

Definition at line 498 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_IT

#define __HAL_RTC_TAMPER_GET_IT	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

                                                                      (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
                                                                      ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
                                                                                                          (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET))

Check whether the specified RTC Tamper interrupt has occurred or not.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC Tamper interrupt to check. This parameter can be: RTC_IT_TAMP: All tampers interrupts RTC_IT_TAMP1: Tamper1 interrupt RTC_IT_TAMP2: Tamper2 interrupt RTC_IT_TAMP3: Tamper3 interrupt

Return values

None

Definition at line 471 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_GET_IT_SOURCE

#define __HAL_RTC_TAMPER_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)

Check whether the specified RTC Tamper interrupt has been enabled or not.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC Tamper interrupt source to check. This parameter can be: RTC_IT_TAMP: All tampers interrupts RTC_IT_TAMP1: Tamper1 interrupt RTC_IT_TAMP2: Tamper2 interrupt RTC_IT_TAMP3: Tamper3 interrupt

Return values

None

Definition at line 486 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG ( ) (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Clear the RTC Tamper and Timestamp associated Exti line flag.

Return values

None.

Definition at line 810 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT ( ) (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable event on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 761 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE ( ) (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 773 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT ( ) (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable interrupt on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 749 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE ( ) (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))

Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 785 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE ( ) __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();

Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. This parameter can be:

Return values

None.

Definition at line 798 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT ( ) (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable event on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 755 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE ( ) (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 767 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT ( ) (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable interrupt on the RTC Tamper and Timestamp associated Exti line.

Return values

None

Definition at line 743 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE ( ) (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 779 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE ( ) __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();

Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 791 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT ( ) (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line.

Return values

None.

Definition at line 816 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG

#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG ( ) (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)

Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.

Return values

Line Status.

Definition at line 804 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_CLEAR_FLAG

#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Time Stamp's pending flags.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC Alarm Flag sources to clear. This parameter can be: RTC_FLAG_TSF RTC_FLAG_TSOVF

Return values

None

Definition at line 586 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_DISABLE

#define __HAL_RTC_TIMESTAMP_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))

Disable the RTC TimeStamp peripheral.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 524 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_DISABLE_IT

#define __HAL_RTC_TIMESTAMP_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

Disable the RTC TimeStamp interrupt.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC TimeStamp interrupt sources to be enabled or disabled. This parameter can be: RTC_IT_TS: TimeStamp interrupt

Return values

None

Definition at line 544 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_ENABLE

#define __HAL_RTC_TIMESTAMP_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))

Enable the RTC TimeStamp peripheral.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 517 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_ENABLE_IT

#define __HAL_RTC_TIMESTAMP_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->CR \|= (__INTERRUPT__))

Enable the RTC TimeStamp interrupt.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC TimeStamp interrupt sources to be enabled or disabled. This parameter can be: RTC_IT_TS: TimeStamp interrupt

Return values

None

Definition at line 534 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_GET_FLAG

#define __HAL_RTC_TIMESTAMP_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)

Get the selected RTC TimeStamp's flag status.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC TimeStamp Flag is pending or not. This parameter can be: RTC_FLAG_TSF RTC_FLAG_TSOVF

Return values

None

Definition at line 575 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_GET_IT

#define __HAL_RTC_TIMESTAMP_GET_IT	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)

Check whether the specified RTC TimeStamp interrupt has occurred or not.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC TimeStamp interrupt sources to check. This parameter can be: RTC_IT_TS: TimeStamp interrupt

Return values

None

Definition at line 554 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_TIMESTAMP_GET_IT_SOURCE

#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)

Check whether the specified RTC Time Stamp interrupt has been enabled or not.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC Time Stamp interrupt source to check. This parameter can be: RTC_IT_TS: TimeStamp interrupt

Return values

None

Definition at line 564 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG

#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Wake Up timer's pending flags.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC WakeUpTimer Flag to clear. This parameter can be: RTC_FLAG_WUTF

Return values

None

Definition at line 416 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_DISABLE

#define __HAL_RTC_WAKEUPTIMER_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))

Disable the RTC WakeUp Timer peripheral.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 355 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_DISABLE_IT

#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

Disable the RTC WakeUpTimer interrupt.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. This parameter can be: RTC_IT_WUT: WakeUpTimer interrupt

Return values

None

Definition at line 375 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_ENABLE

#define __HAL_RTC_WAKEUPTIMER_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))

Enable the RTC WakeUp Timer peripheral.

Parameters

HANDLE specifies the RTC handle.

Return values

None

Definition at line 348 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_ENABLE_IT

#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->CR \|= (__INTERRUPT__))

Enable the RTC WakeUpTimer interrupt.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. This parameter can be: RTC_IT_WUT: WakeUpTimer interrupt

Return values

None

Definition at line 365 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG

#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG ( ) (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Clear the RTC WakeUp Timer associated Exti line flag.

Return values

None.

Definition at line 731 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT ( ) (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable event on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 682 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE ( ) (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 694 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT ( ) (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable interrupt on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 670 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE ( ) (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 706 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE ( ) __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();

Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. This parameter can be:

Return values

None.

Definition at line 719 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT ( ) (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable event on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 676 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE ( ) (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 688 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT ( ) (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable interrupt on the RTC WakeUp Timer associated Exti line.

Return values

None

Definition at line 664 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE ( ) (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 700 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE ( ) __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();

Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 712 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT

#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT ( ) (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.

Return values

None.

Definition at line 737 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG

#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG ( ) (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.

Return values

Line Status.

Definition at line 725 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_GET_FLAG

#define __HAL_RTC_WAKEUPTIMER_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)

Get the selected RTC WakeUpTimer's flag status.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>FLAG</strong>	specifies the RTC WakeUpTimer Flag is pending or not. This parameter can be: RTC_FLAG_WUTF RTC_FLAG_WUTWF

Return values

None

Definition at line 406 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_GET_IT

#define __HAL_RTC_WAKEUPTIMER_GET_IT	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)

Check whether the specified RTC WakeUpTimer interrupt has occurred or not.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC WakeUpTimer interrupt sources to check. This parameter can be: RTC_IT_WUT: WakeUpTimer interrupt

Return values

None

Definition at line 385 of file stm32f7xx_hal_rtc_ex.h.

◆ __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE

#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)

Check whether the specified RTC Wake Up timer interrupt has been enabled or not.

Parameters

<strong>HANDLE</strong>	specifies the RTC handle.
<strong>INTERRUPT</strong>	specifies the RTC Wake Up timer interrupt sources to check. This parameter can be: RTC_IT_WUT: WakeUpTimer interrupt

Return values

None

Definition at line 395 of file stm32f7xx_hal_rtc_ex.h.

Modules

Macros

Detailed Description

Macro Definition Documentation

◆ __HAL_RTC_CALIBRATION_OUTPUT_DISABLE

◆ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE

◆ __HAL_RTC_CLOCKREF_DETECTION_DISABLE

◆ __HAL_RTC_CLOCKREF_DETECTION_ENABLE

◆ __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG

◆ __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE

◆ __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE

◆ __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG

◆ __HAL_RTC_SHIFT_GET_FLAG

◆ __HAL_RTC_TAMPER1_DISABLE

◆ __HAL_RTC_TAMPER1_ENABLE

◆ __HAL_RTC_TAMPER2_DISABLE

◆ __HAL_RTC_TAMPER2_ENABLE

◆ __HAL_RTC_TAMPER3_DISABLE

◆ __HAL_RTC_TAMPER3_ENABLE

◆ __HAL_RTC_TAMPER_CLEAR_FLAG

◆ __HAL_RTC_TAMPER_GET_FLAG

◆ __HAL_RTC_TAMPER_GET_IT

◆ __HAL_RTC_TAMPER_GET_IT_SOURCE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT

◆ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG

◆ __HAL_RTC_TIMESTAMP_CLEAR_FLAG

◆ __HAL_RTC_TIMESTAMP_DISABLE

◆ __HAL_RTC_TIMESTAMP_DISABLE_IT

◆ __HAL_RTC_TIMESTAMP_ENABLE

◆ __HAL_RTC_TIMESTAMP_ENABLE_IT

◆ __HAL_RTC_TIMESTAMP_GET_FLAG

◆ __HAL_RTC_TIMESTAMP_GET_IT

◆ __HAL_RTC_TIMESTAMP_GET_IT_SOURCE

◆ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG

◆ __HAL_RTC_WAKEUPTIMER_DISABLE

◆ __HAL_RTC_WAKEUPTIMER_DISABLE_IT

◆ __HAL_RTC_WAKEUPTIMER_ENABLE

◆ __HAL_RTC_WAKEUPTIMER_ENABLE_IT

◆ __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE

◆ __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE

◆ __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE

◆ __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT

◆ __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG

◆ __HAL_RTC_WAKEUPTIMER_GET_FLAG

◆ __HAL_RTC_WAKEUPTIMER_GET_IT

◆ __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE