dsr_simple_test.py

Go to the documentation of this file.

#!/usr/bin/env python
# -*- coding: utf-8 -*-
# ##
# @brief    [py example simple] motion basic test for doosan robot
# @author   Kab Kyoum Kim (kabkyoum.kim@doosan.com)   

import rospy
import os
import threading, time
import sys
sys.dont_write_bytecode = True
sys.path.append( os.path.abspath(os.path.join(os.path.dirname(__file__),"../../../../common/imp")) ) # get import pass : DSR_ROBOT.py 

# for single robot 
ROBOT_ID     = "dsr01"
ROBOT_MODEL  = "m1013"
import DR_init
DR_init.__dsr__id = ROBOT_ID
DR_init.__dsr__model = ROBOT_MODEL
from DSR_ROBOT import *

def shutdown():
    print "shutdown time!"
    print "shutdown time!"
    print "shutdown time!"

    pub_stop.publish(stop_mode=STOP_TYPE_QUICK)
    return 0

def msgRobotState_cb(msg):
    msgRobotState_cb.count += 1

    if (0==(msgRobotState_cb.count % 100)): 
        rospy.loginfo("________ ROBOT STATUS ________")
        print("  robot_state       : %d" % (msg.robot_state))
        print("  robot_state_str   : %s" % (msg.robot_state_str))
        print("  current_posj      : %7.3f %7.3f %7.3f %7.3f %7.3f %7.3f" % (msg.current_posj[0],msg.current_posj[1],msg.current_posj[2],msg.current_posj[3],msg.current_posj[4],msg.current_posj[5]))
        #print("  current_posx      : %7.3f %7.3f %7.3f %7.3f %7.3f %7.3f" % (msg.current_posx[0],msg.current_posx[1],msg.current_posx[2],msg.current_posx[3],msg.current_posx[4],msg.current_posx[5]))

        #print("  io_control_box    : %d" % (msg.io_control_box))
        
        print("  speed             : %d" % (msg.speed))
        #print("  mastering_need    : %d" % (msg.mastering_need))
        #print("  drl_stopped       : %d" % (msg.drl_stopped))
        #print("  disconnected      : %d" % (msg.disconnected))
msgRobotState_cb.count = 0

def thread_subscriber():
    rospy.Subscriber('/'+ROBOT_ID +ROBOT_MODEL+'/state', RobotState, msgRobotState_cb)
    rospy.spin()
    #rospy.spinner(2)    
  
if __name__ == "__main__":
    rospy.init_node('dsr_simple_test_py')
    rospy.on_shutdown(shutdown)

    t1 = threading.Thread(target=thread_subscriber)
    t1.daemon = True 
    t1.start()

    pub_stop = rospy.Publisher('/'+ROBOT_ID +ROBOT_MODEL+'/stop', RobotStop, queue_size=10)           

    set_velx(30,20)  # set global task speed: 30(mm/sec), 20(deg/sec)
    set_accx(60,40)  # set global task accel: 60(mm/sec2), 40(deg/sec2)

    velx=[50, 50]
    accx=[100, 100]

    p1= posj(0,0,0,0,0,0)                    #joint
    p2= posj(0.0, 0.0, 90.0, 0.0, 90.0, 0.0) #joint

    x1= posx(400, 500, 800.0, 0.0, 180.0, 0.0) #task
    x2= posx(400, 500, 500.0, 0.0, 180.0, 0.0) #task

    c1 = posx(559,434.5,651.5,0,180,0)
    c2 = posx(559,434.5,251.5,0,180,0)


    q0 = posj(0,0,0,0,0,0)
    q1 = posj(10, -10, 20, -30, 10, 20)
    q2 = posj(25, 0, 10, -50, 20, 40) 
    q3 = posj(50, 50, 50, 50, 50, 50) 
    q4 = posj(30, 10, 30, -20, 10, 60)
    q5 = posj(20, 20, 40, 20, 0, 90)
    qlist = [q0, q1, q2, q3, q4, q5]

    x1 = posx(600, 600, 600, 0, 175, 0)
    x2 = posx(600, 750, 600, 0, 175, 0)
    x3 = posx(150, 600, 450, 0, 175, 0)
    x4 = posx(-300, 300, 300, 0, 175, 0)
    x5 = posx(-200, 700, 500, 0, 175, 0)
    x6 = posx(600, 600, 400, 0, 175, 0)
    xlist = [x1, x2, x3, x4, x5, x6]


    X1 =  posx(370, 670, 650, 0, 180, 0)
    X1a = posx(370, 670, 400, 0, 180, 0)
    X1a2= posx(370, 545, 400, 0, 180, 0)
    X1b = posx(370, 595, 400, 0, 180, 0)
    X1b2= posx(370, 670, 400, 0, 180, 0)
    X1c = posx(370, 420, 150, 0, 180, 0)
    X1c2= posx(370, 545, 150, 0, 180, 0)
    X1d = posx(370, 670, 275, 0, 180, 0)
    X1d2= posx(370, 795, 150, 0, 180, 0)


    seg11 = posb(DR_LINE, X1, radius=20)
    seg12 = posb(DR_CIRCLE, X1a, X1a2, radius=21)
    seg14 = posb(DR_LINE, X1b2, radius=20)
    seg15 = posb(DR_CIRCLE, X1c, X1c2, radius=22)
    seg16 = posb(DR_CIRCLE, X1d, X1d2, radius=23)
    b_list1 = [seg11, seg12, seg14, seg15, seg16] 

    while not rospy.is_shutdown():
        movej(p2, vel=100, acc=100)
        movejx(x1, vel=30, acc=60, sol=0)
        movel(x2, velx, accx)
        movec(c1, c2, velx, accx)
        movesj(qlist, vel=100, acc=100)
        movesx(xlist, vel=100, acc=100)
        move_spiral(rev=9.5,rmax=20.0,lmax=50.0,time=20.0,axis=DR_AXIS_Z,ref=DR_TOOL)
        move_periodic(amp =[10,0,0,0,30,0], period=1.0, atime=0.2, repeat=5, ref=DR_TOOL)
        moveb(b_list1, vel=150, acc=250, ref=DR_BASE, mod=DR_MV_MOD_ABS)

    print 'good bye!'