stm32f4xx_rng.c File Reference

This file provides firmware functions to manage the following functionalities of the Random Number Generator (RNG) peripheral: More...

#include "stm32f4xx_rng.h"
#include "stm32f4xx_rcc.h"

Include dependency graph for stm32f4xx_rng.c:

Go to the source code of this file.

Functions
void	RNG_ClearFlag (uint8_t RNG_FLAG)
	Clears the RNG flags. More...
void	RNG_ClearITPendingBit (uint8_t RNG_IT)
	Clears the RNG interrupt pending bit(s). More...
void	RNG_Cmd (FunctionalState NewState)
	Enables or disables the RNG peripheral. More...
void	RNG_DeInit (void)
	De-initializes the RNG peripheral registers to their default reset values. More...
FlagStatus	RNG_GetFlagStatus (uint8_t RNG_FLAG)
	Checks whether the specified RNG flag is set or not. More...
ITStatus	RNG_GetITStatus (uint8_t RNG_IT)
	Checks whether the specified RNG interrupt has occurred or not. More...
uint32_t	RNG_GetRandomNumber (void)
	Returns a 32-bit random number. More...
void	RNG_ITConfig (FunctionalState NewState)
	Enables or disables the RNG interrupt. More...

Detailed Description

This file provides firmware functions to manage the following functionalities of the Random Number Generator (RNG) peripheral:

Author

MCD Application Team

Version

V1.1.0

Date

11-January-2013

• Initialization and Configuration
• Get 32 bit Random number
• Interrupts and flags management

 ===================================================================      
                 ##### How to use this driver #####
 ===================================================================          
 [..]
   (#) Enable The RNG controller clock using 
       RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function.
                
   (#) Activate the RNG peripheral using RNG_Cmd() function.
            
   (#) Wait until the 32 bit Random number Generator contains a valid  random data
      (using polling/interrupt mode). For more details, refer to "Interrupts and 
      flags management functions" module description.
             
   (#) Get the 32 bit Random number using RNG_GetRandomNumber() function
            
   (#) To get another 32 bit Random number, go to step 3.       

@attention

<h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
You may not use this file except in compliance with the License.
You may obtain a copy of the License at:

       http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software 
distributed under the License is distributed on an "AS IS" BASIS, 
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

Definition in file stm32f4xx_rng.c.