This file contains all the functions prototypes for the operational amplifiers (OPAMP) firmware library. More...
#include "stm32f30x.h"
Include dependency graph for stm32f30x_opamp.h:
This graph shows which files directly or indirectly include this file:
Go to the source code of this file.
Classes | |
| struct | OPAMP_InitTypeDef |
| OPAMP Init structure definition. More... | |
Macros | |
| #define | IS_OPAMP_ALL_PERIPH(PERIPH) |
| #define | IS_OPAMP_INPUT(INPUT) |
| #define | IS_OPAMP_INVERTING_INPUT(INPUT) |
| #define | IS_OPAMP_NONINVERTING_INPUT(INPUT) |
| #define | IS_OPAMP_PGACONNECT(CONNECT) |
| #define | IS_OPAMP_PGAGAIN(GAIN) |
| #define | IS_OPAMP_SECONDARY_INVINPUT(INVINPUT) |
| #define | IS_OPAMP_TRIMMING(TRIMMING) |
| #define | IS_OPAMP_TRIMMINGVALUE(VALUE) ((VALUE) <= 0x0000001F) |
| #define | IS_OPAMP_VREF(VREF) |
| #define | OPAMP_Input_Inverting ((uint32_t)0x00000018) |
| #define | OPAMP_Input_NonInverting ((uint32_t)0x00000013) |
| #define | OPAMP_InvertingInput_IO1 ((uint32_t)0x00000000) |
| #define | OPAMP_InvertingInput_IO2 OPAMP_CSR_VMSEL_0 |
| #define | OPAMP_InvertingInput_PGA OPAMP_CSR_VMSEL_1 |
| #define | OPAMP_InvertingInput_Vout OPAMP_CSR_VMSEL |
| #define | OPAMP_NonInvertingInput_IO1 ((uint32_t)0x00000000) |
| #define | OPAMP_NonInvertingInput_IO2 OPAMP_CSR_VPSEL_0 |
| #define | OPAMP_NonInvertingInput_IO3 OPAMP_CSR_VPSEL_1 |
| #define | OPAMP_NonInvertingInput_IO4 OPAMP_CSR_VPSEL |
| #define | OPAMP_OPAMP_PGAGain_16 ((uint32_t)0x0000C000) |
| #define | OPAMP_OPAMP_PGAGain_2 ((uint32_t)0x00000000) |
| #define | OPAMP_OPAMP_PGAGain_4 OPAMP_CSR_PGGAIN_0 |
| #define | OPAMP_OPAMP_PGAGain_8 OPAMP_CSR_PGGAIN_1 |
| #define | OPAMP_OutputLevel_High OPAMP_CSR_OUTCAL |
| #define | OPAMP_OutputLevel_Low ((uint32_t)0x00000000) |
| #define | OPAMP_PGAConnect_IO1 OPAMP_CSR_PGGAIN_3 |
| #define | OPAMP_PGAConnect_IO2 ((uint32_t)0x00030000) |
| #define | OPAMP_PGAConnect_No ((uint32_t)0x00000000) |
| #define | OPAMP_Selection_OPAMP1 ((uint32_t)0x00000000) |
| #define | OPAMP_Selection_OPAMP2 ((uint32_t)0x00000004) |
| #define | OPAMP_Selection_OPAMP3 ((uint32_t)0x00000008) |
| #define | OPAMP_Selection_OPAMP4 ((uint32_t)0x0000000C) |
| #define | OPAMP_Trimming_Factory ((uint32_t)0x00000000) |
| #define | OPAMP_Trimming_User OPAMP_CSR_USERTRIM |
| #define | OPAMP_Vref_10VDDA OPAMP_CSR_CALSEL_0 |
| #define | OPAMP_Vref_3VDDA ((uint32_t)0x00000000) |
| #define | OPAMP_Vref_50VDDA OPAMP_CSR_CALSEL_1 |
| #define | OPAMP_Vref_90VDDA OPAMP_CSR_CALSEL |
Functions | |
| void | OPAMP_Cmd (uint32_t OPAMP_Selection, FunctionalState NewState) |
| Enable or disable the OPAMP peripheral. More... | |
| void | OPAMP_DeInit (uint32_t OPAMP_Selection) |
| Deinitializes OPAMP peripheral registers to their default reset values. More... | |
| uint32_t | OPAMP_GetOutputLevel (uint32_t OPAMP_Selection) |
| Return the output level (high or low) during calibration of the selected OPAMP. More... | |
| void | OPAMP_Init (uint32_t OPAMP_Selection, OPAMP_InitTypeDef *OPAMP_InitStruct) |
| Initializes the OPAMP peripheral according to the specified parameters in OPAMP_InitStruct. More... | |
| void | OPAMP_LockConfig (uint32_t OPAMP_Selection) |
| Lock the selected OPAMP configuration. More... | |
| void | OPAMP_OffsetTrimConfig (uint32_t OPAMP_Selection, uint32_t OPAMP_Input, uint32_t OPAMP_TrimValue) |
| Configure the trimming value of the OPAMP. More... | |
| void | OPAMP_OffsetTrimModeSelect (uint32_t OPAMP_Selection, uint32_t OPAMP_Trimming) |
| Select the trimming mode. More... | |
| void | OPAMP_PGAConfig (uint32_t OPAMP_Selection, uint32_t OPAMP_PGAGain, uint32_t OPAMP_PGAConnect) |
| Configure the feedback resistor gain. More... | |
| void | OPAMP_StartCalibration (uint32_t OPAMP_Selection, FunctionalState NewState) |
| Start or stop the calibration of selected OPAMP peripheral. More... | |
| void | OPAMP_StructInit (OPAMP_InitTypeDef *OPAMP_InitStruct) |
| Fills each OPAMP_InitStruct member with its default value. More... | |
| void | OPAMP_TimerControlledMuxCmd (uint32_t OPAMP_Selection, FunctionalState NewState) |
| Enable or disable the timer-controlled mux mode. More... | |
| void | OPAMP_TimerControlledMuxConfig (uint32_t OPAMP_Selection, OPAMP_InitTypeDef *OPAMP_InitStruct) |
| Configure the OPAMP peripheral (secondary inputs) for timer-controlled mux mode according to the specified parameters in OPAMP_InitStruct. More... | |
| void | OPAMP_VrefConfig (uint32_t OPAMP_Selection, uint32_t OPAMP_Vref) |
| Configure the OPAMP's internal reference. More... | |
| void | OPAMP_VrefConnectADCCmd (uint32_t OPAMP_Selection, FunctionalState NewState) |
| Enables or disables connecting the OPAMP's internal reference to ADC. More... | |
| void | OPAMP_VrefConnectNonInvertingInput (uint32_t OPAMP_Selection, FunctionalState NewState) |
| Connnect the internal reference to the OPAMP's non inverting input. More... | |
Detailed Description
This file contains all the functions prototypes for the operational amplifiers (OPAMP) firmware library.
- Version
- V1.1.1
- Date
- 04-April-2014
- Attention
© COPYRIGHT 2014 STMicroelectronics
Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:
http://www.st.com/software_license_agreement_liberty_v2
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Definition in file stm32f30x_opamp.h.