This file provides all the FLASH firmware functions. More...
#include "stm32f10x_flash.h"
Include dependency graph for stm32f10x_flash.c:
Go to the source code of this file.
Macros | |
| #define | ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) |
| #define | ACR_LATENCY_Mask ((uint32_t)0x00000038) |
| #define | ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) |
| #define | ACR_PRFTBS_Mask ((uint32_t)0x00000020) |
| #define | CR_LOCK_Set ((uint32_t)0x00000080) |
| #define | CR_MER_Reset ((uint32_t)0x00001FFB) |
| #define | CR_MER_Set ((uint32_t)0x00000004) |
| #define | CR_OPTER_Reset ((uint32_t)0x00001FDF) |
| #define | CR_OPTER_Set ((uint32_t)0x00000020) |
| #define | CR_OPTPG_Reset ((uint32_t)0x00001FEF) |
| #define | CR_OPTPG_Set ((uint32_t)0x00000010) |
| #define | CR_PER_Reset ((uint32_t)0x00001FFD) |
| #define | CR_PER_Set ((uint32_t)0x00000002) |
| #define | CR_PG_Reset ((uint32_t)0x00001FFE) |
| #define | CR_PG_Set ((uint32_t)0x00000001) |
| #define | CR_STRT_Set ((uint32_t)0x00000040) |
| #define | EraseTimeout ((uint32_t)0x000B0000) |
| #define | FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) |
| #define | FLASH_KEY1 ((uint32_t)0x45670123) |
| #define | FLASH_KEY2 ((uint32_t)0xCDEF89AB) |
| #define | OB_USER_BFB2 ((uint16_t)0x0008) |
| #define | ProgramTimeout ((uint32_t)0x00002000) |
| #define | RDP_Key ((uint16_t)0x00A5) |
| #define | RDPRT_Mask ((uint32_t)0x00000002) |
| #define | WRP0_Mask ((uint32_t)0x000000FF) |
| #define | WRP1_Mask ((uint32_t)0x0000FF00) |
| #define | WRP2_Mask ((uint32_t)0x00FF0000) |
| #define | WRP3_Mask ((uint32_t)0xFF000000) |
Functions | |
| void | FLASH_ClearFlag (uint32_t FLASH_FLAG) |
| Clears the FLASH's pending flags. More... | |
| FLASH_Status | FLASH_EnableWriteProtection (uint32_t FLASH_Pages) |
| Write protects the desired pages. More... | |
| FLASH_Status | FLASH_EraseAllBank1Pages (void) |
| Erases all Bank1 FLASH pages. More... | |
| FLASH_Status | FLASH_EraseAllPages (void) |
| Erases all FLASH pages. More... | |
| FLASH_Status | FLASH_EraseOptionBytes (void) |
| Erases the FLASH option bytes. More... | |
| FLASH_Status | FLASH_ErasePage (uint32_t Page_Address) |
| Erases a specified FLASH page. More... | |
| FLASH_Status | FLASH_GetBank1Status (void) |
| Returns the FLASH Bank1 Status. More... | |
| FlagStatus | FLASH_GetFlagStatus (uint32_t FLASH_FLAG) |
| Checks whether the specified FLASH flag is set or not. More... | |
| FlagStatus | FLASH_GetPrefetchBufferStatus (void) |
| Checks whether the FLASH Prefetch Buffer status is set or not. More... | |
| FlagStatus | FLASH_GetReadOutProtectionStatus (void) |
| Checks whether the FLASH Read Out Protection Status is set or not. More... | |
| FLASH_Status | FLASH_GetStatus (void) |
| Returns the FLASH Status. More... | |
| uint32_t | FLASH_GetUserOptionByte (void) |
| Returns the FLASH User Option Bytes values. More... | |
| uint32_t | FLASH_GetWriteProtectionOptionByte (void) |
| Returns the FLASH Write Protection Option Bytes Register value. More... | |
| void | FLASH_HalfCycleAccessCmd (uint32_t FLASH_HalfCycleAccess) |
| Enables or disables the Half cycle flash access. More... | |
| void | FLASH_ITConfig (uint32_t FLASH_IT, FunctionalState NewState) |
| Enables or disables the specified FLASH interrupts. More... | |
| void | FLASH_Lock (void) |
| Locks the FLASH Program Erase Controller. More... | |
| void | FLASH_LockBank1 (void) |
| Locks the FLASH Bank1 Program Erase Controller. More... | |
| void | FLASH_PrefetchBufferCmd (uint32_t FLASH_PrefetchBuffer) |
| Enables or disables the Prefetch Buffer. More... | |
| FLASH_Status | FLASH_ProgramHalfWord (uint32_t Address, uint16_t Data) |
| Programs a half word at a specified address. More... | |
| FLASH_Status | FLASH_ProgramOptionByteData (uint32_t Address, uint8_t Data) |
| Programs a half word at a specified Option Byte Data address. More... | |
| FLASH_Status | FLASH_ProgramWord (uint32_t Address, uint32_t Data) |
| Programs a word at a specified address. More... | |
| FLASH_Status | FLASH_ReadOutProtection (FunctionalState NewState) |
| Enables or disables the read out protection. More... | |
| void | FLASH_SetLatency (uint32_t FLASH_Latency) |
| Sets the code latency value. More... | |
| void | FLASH_Unlock (void) |
| Unlocks the FLASH Program Erase Controller. More... | |
| void | FLASH_UnlockBank1 (void) |
| Unlocks the FLASH Bank1 Program Erase Controller. More... | |
| FLASH_Status | FLASH_UserOptionByteConfig (uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) |
| Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. More... | |
| FLASH_Status | FLASH_WaitForLastBank1Operation (uint32_t Timeout) |
| Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. More... | |
| FLASH_Status | FLASH_WaitForLastOperation (uint32_t Timeout) |
| Waits for a Flash operation to complete or a TIMEOUT to occur. More... | |
Detailed Description
This file provides all the FLASH firmware functions.
- Version
- V3.5.0
- Date
- 11-March-2011
- Attention
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm32f10x_flash.c.