jdmaster.c
Go to the documentation of this file.
1 /*
2  * jdmaster.c
3  *
4  * Copyright (C) 1991-1997, Thomas G. Lane.
5  * This file is part of the Independent JPEG Group's software.
6  * For conditions of distribution and use, see the accompanying README file.
7  *
8  * This file contains master control logic for the JPEG decompressor.
9  * These routines are concerned with selecting the modules to be executed
10  * and with determining the number of passes and the work to be done in each
11  * pass.
12  */
13 
14 #define JPEG_INTERNALS
15 #include "jinclude.h"
16 #include "jpeglib.h"
17 
18 
19 /* Private state */
20 
21 typedef struct {
22  struct jpeg_decomp_master pub; /* public fields */
23 
24  int pass_number; /* # of passes completed */
25 
26  boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */
27 
28  /* Saved references to initialized quantizer modules,
29  * in case we need to switch modes.
30  */
34 
36 
37 
38 /*
39  * Determine whether merged upsample/color conversion should be used.
40  * CRUCIAL: this must match the actual capabilities of jdmerge.c!
41  */
42 
43 LOCAL(boolean)
45 {
46 #ifdef UPSAMPLE_MERGING_SUPPORTED
47  /* Merging is the equivalent of plain box-filter upsampling */
48  if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
49  return FALSE;
50  /* jdmerge.c only supports YCC=>RGB color conversion */
51  if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
52  cinfo->out_color_space != JCS_RGB ||
53  cinfo->out_color_components != RGB_PIXELSIZE)
54  return FALSE;
55  /* and it only handles 2h1v or 2h2v sampling ratios */
56  if (cinfo->comp_info[0].h_samp_factor != 2 ||
57  cinfo->comp_info[1].h_samp_factor != 1 ||
58  cinfo->comp_info[2].h_samp_factor != 1 ||
59  cinfo->comp_info[0].v_samp_factor > 2 ||
60  cinfo->comp_info[1].v_samp_factor != 1 ||
61  cinfo->comp_info[2].v_samp_factor != 1)
62  return FALSE;
63  /* furthermore, it doesn't work if we've scaled the IDCTs differently */
64  if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
65  cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
66  cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
67  return FALSE;
68  /* ??? also need to test for upsample-time rescaling, when & if supported */
69  return TRUE; /* by golly, it'll work... */
70 #else
71  return FALSE;
72 #endif
73 }
74 
75 
76 /*
77  * Compute output image dimensions and related values.
78  * NOTE: this is exported for possible use by application.
79  * Hence it mustn't do anything that can't be done twice.
80  * Also note that it may be called before the master module is initialized!
81  */
82 
83 GLOBAL(void)
85 /* Do computations that are needed before master selection phase */
86 {
87 #ifdef IDCT_SCALING_SUPPORTED
88  int ci;
90 #endif
91 
92  /* Prevent application from calling me at wrong times */
93  if (cinfo->global_state != DSTATE_READY)
94  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
95 
96 #ifdef IDCT_SCALING_SUPPORTED
97 
98  /* Compute actual output image dimensions and DCT scaling choices. */
99  if (cinfo->scale_num * 8 <= cinfo->scale_denom) {
100  /* Provide 1/8 scaling */
101  cinfo->output_width = (JDIMENSION)
102  jdiv_round_up((long) cinfo->image_width, 8L);
103  cinfo->output_height = (JDIMENSION)
104  jdiv_round_up((long) cinfo->image_height, 8L);
105  cinfo->min_DCT_scaled_size = 1;
106  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
107  /* Provide 1/4 scaling */
108  cinfo->output_width = (JDIMENSION)
109  jdiv_round_up((long) cinfo->image_width, 4L);
110  cinfo->output_height = (JDIMENSION)
111  jdiv_round_up((long) cinfo->image_height, 4L);
112  cinfo->min_DCT_scaled_size = 2;
113  } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
114  /* Provide 1/2 scaling */
115  cinfo->output_width = (JDIMENSION)
116  jdiv_round_up((long) cinfo->image_width, 2L);
117  cinfo->output_height = (JDIMENSION)
118  jdiv_round_up((long) cinfo->image_height, 2L);
119  cinfo->min_DCT_scaled_size = 4;
120  } else {
121  /* Provide 1/1 scaling */
122  cinfo->output_width = cinfo->image_width;
123  cinfo->output_height = cinfo->image_height;
124  cinfo->min_DCT_scaled_size = DCTSIZE;
125  }
126  /* In selecting the actual DCT scaling for each component, we try to
127  * scale up the chroma components via IDCT scaling rather than upsampling.
128  * This saves time if the upsampler gets to use 1:1 scaling.
129  * Note this code assumes that the supported DCT scalings are powers of 2.
130  */
131  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
132  ci++, compptr++) {
133  int ssize = cinfo->min_DCT_scaled_size;
134  while (ssize < DCTSIZE &&
135  (compptr->h_samp_factor * ssize * 2 <=
136  cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) &&
137  (compptr->v_samp_factor * ssize * 2 <=
138  cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) {
139  ssize = ssize * 2;
140  }
141  compptr->DCT_scaled_size = ssize;
142  }
143 
144  /* Recompute downsampled dimensions of components;
145  * application needs to know these if using raw downsampled data.
146  */
147  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
148  ci++, compptr++) {
149  /* Size in samples, after IDCT scaling */
150  compptr->downsampled_width = (JDIMENSION)
151  jdiv_round_up((long) cinfo->image_width *
152  (long) (compptr->h_samp_factor * compptr->DCT_scaled_size),
153  (long) (cinfo->max_h_samp_factor * DCTSIZE));
154  compptr->downsampled_height = (JDIMENSION)
155  jdiv_round_up((long) cinfo->image_height *
156  (long) (compptr->v_samp_factor * compptr->DCT_scaled_size),
157  (long) (cinfo->max_v_samp_factor * DCTSIZE));
158  }
159 
160 #else /* !IDCT_SCALING_SUPPORTED */
161 
162  /* Hardwire it to "no scaling" */
163  cinfo->output_width = cinfo->image_width;
164  cinfo->output_height = cinfo->image_height;
165  /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
166  * and has computed unscaled downsampled_width and downsampled_height.
167  */
168 
169 #endif /* IDCT_SCALING_SUPPORTED */
170 
171  /* Report number of components in selected colorspace. */
172  /* Probably this should be in the color conversion module... */
173  switch (cinfo->out_color_space) {
174  case JCS_GRAYSCALE:
175  cinfo->out_color_components = 1;
176  break;
177  case JCS_RGB:
178 #if RGB_PIXELSIZE != 3
179  cinfo->out_color_components = RGB_PIXELSIZE;
180  break;
181 #endif /* else share code with YCbCr */
182  case JCS_YCbCr:
183  cinfo->out_color_components = 3;
184  break;
185  case JCS_CMYK:
186  case JCS_YCCK:
187  cinfo->out_color_components = 4;
188  break;
189  default: /* else must be same colorspace as in file */
190  cinfo->out_color_components = cinfo->num_components;
191  break;
192  }
193  cinfo->output_components = (cinfo->quantize_colors ? 1 :
194  cinfo->out_color_components);
195 
196  /* See if upsampler will want to emit more than one row at a time */
197  if (use_merged_upsample(cinfo))
198  cinfo->rec_outbuf_height = cinfo->max_v_samp_factor;
199  else
200  cinfo->rec_outbuf_height = 1;
201 }
202 
203 
204 /*
205  * Several decompression processes need to range-limit values to the range
206  * 0..MAXJSAMPLE; the input value may fall somewhat outside this range
207  * due to noise introduced by quantization, roundoff error, etc. These
208  * processes are inner loops and need to be as fast as possible. On most
209  * machines, particularly CPUs with pipelines or instruction prefetch,
210  * a (subscript-check-less) C table lookup
211  * x = sample_range_limit[x];
212  * is faster than explicit tests
213  * if (x < 0) x = 0;
214  * else if (x > MAXJSAMPLE) x = MAXJSAMPLE;
215  * These processes all use a common table prepared by the routine below.
216  *
217  * For most steps we can mathematically guarantee that the initial value
218  * of x is within MAXJSAMPLE+1 of the legal range, so a table running from
219  * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial
220  * limiting step (just after the IDCT), a wildly out-of-range value is
221  * possible if the input data is corrupt. To avoid any chance of indexing
222  * off the end of memory and getting a bad-pointer trap, we perform the
223  * post-IDCT limiting thus:
224  * x = range_limit[x & MASK];
225  * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
226  * samples. Under normal circumstances this is more than enough range and
227  * a correct output will be generated; with bogus input data the mask will
228  * cause wraparound, and we will safely generate a bogus-but-in-range output.
229  * For the post-IDCT step, we want to convert the data from signed to unsigned
230  * representation by adding CENTERJSAMPLE at the same time that we limit it.
231  * So the post-IDCT limiting table ends up looking like this:
232  * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
233  * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
234  * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
235  * 0,1,...,CENTERJSAMPLE-1
236  * Negative inputs select values from the upper half of the table after
237  * masking.
238  *
239  * We can save some space by overlapping the start of the post-IDCT table
240  * with the simpler range limiting table. The post-IDCT table begins at
241  * sample_range_limit + CENTERJSAMPLE.
242  *
243  * Note that the table is allocated in near data space on PCs; it's small
244  * enough and used often enough to justify this.
245  */
246 
247 LOCAL(void)
249 /* Allocate and fill in the sample_range_limit table */
250 {
251  JSAMPLE * table;
252  int i;
253 
254  table = (JSAMPLE *)
255  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
256  (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
257  table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */
258  cinfo->sample_range_limit = table;
259  /* First segment of "simple" table: limit[x] = 0 for x < 0 */
260  MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
261  /* Main part of "simple" table: limit[x] = x */
262  for (i = 0; i <= MAXJSAMPLE; i++)
263  table[i] = (JSAMPLE) i;
264  table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */
265  /* End of simple table, rest of first half of post-IDCT table */
266  for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
267  table[i] = MAXJSAMPLE;
268  /* Second half of post-IDCT table */
269  MEMZERO(table + (2 * (MAXJSAMPLE+1)),
270  (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
271  MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
272  cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
273 }
274 
275 
276 /*
277  * Master selection of decompression modules.
278  * This is done once at jpeg_start_decompress time. We determine
279  * which modules will be used and give them appropriate initialization calls.
280  * We also initialize the decompressor input side to begin consuming data.
281  *
282  * Since jpeg_read_header has finished, we know what is in the SOF
283  * and (first) SOS markers. We also have all the application parameter
284  * settings.
285  */
286 
287 LOCAL(void)
289 {
290  my_master_ptr master = (my_master_ptr) cinfo->master;
291  boolean use_c_buffer;
292  long samplesperrow;
293  JDIMENSION jd_samplesperrow;
294 
295  /* Initialize dimensions and other stuff */
298 
299  /* Width of an output scanline must be representable as JDIMENSION. */
300  samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
301  jd_samplesperrow = (JDIMENSION) samplesperrow;
302  if ((long) jd_samplesperrow != samplesperrow)
303  ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
304 
305  /* Initialize my private state */
306  master->pass_number = 0;
307  master->using_merged_upsample = use_merged_upsample(cinfo);
308 
309  /* Color quantizer selection */
310  master->quantizer_1pass = NULL;
311  master->quantizer_2pass = NULL;
312  /* No mode changes if not using buffered-image mode. */
313  if (! cinfo->quantize_colors || ! cinfo->buffered_image) {
314  cinfo->enable_1pass_quant = FALSE;
315  cinfo->enable_external_quant = FALSE;
316  cinfo->enable_2pass_quant = FALSE;
317  }
318  if (cinfo->quantize_colors) {
319  if (cinfo->raw_data_out)
320  ERREXIT(cinfo, JERR_NOTIMPL);
321  /* 2-pass quantizer only works in 3-component color space. */
322  if (cinfo->out_color_components != 3) {
323  cinfo->enable_1pass_quant = TRUE;
324  cinfo->enable_external_quant = FALSE;
325  cinfo->enable_2pass_quant = FALSE;
326  cinfo->colormap = NULL;
327  } else if (cinfo->colormap != NULL) {
328  cinfo->enable_external_quant = TRUE;
329  } else if (cinfo->two_pass_quantize) {
330  cinfo->enable_2pass_quant = TRUE;
331  } else {
332  cinfo->enable_1pass_quant = TRUE;
333  }
334 
335  if (cinfo->enable_1pass_quant) {
336 #ifdef QUANT_1PASS_SUPPORTED
337  jinit_1pass_quantizer(cinfo);
338  master->quantizer_1pass = cinfo->cquantize;
339 #else
340  ERREXIT(cinfo, JERR_NOT_COMPILED);
341 #endif
342  }
343 
344  /* We use the 2-pass code to map to external colormaps. */
345  if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) {
346 #ifdef QUANT_2PASS_SUPPORTED
347  jinit_2pass_quantizer(cinfo);
348  master->quantizer_2pass = cinfo->cquantize;
349 #else
350  ERREXIT(cinfo, JERR_NOT_COMPILED);
351 #endif
352  }
353  /* If both quantizers are initialized, the 2-pass one is left active;
354  * this is necessary for starting with quantization to an external map.
355  */
356  }
357 
358  /* Post-processing: in particular, color conversion first */
359  if (! cinfo->raw_data_out) {
360  if (master->using_merged_upsample) {
361 #ifdef UPSAMPLE_MERGING_SUPPORTED
362  jinit_merged_upsampler(cinfo); /* does color conversion too */
363 #else
364  ERREXIT(cinfo, JERR_NOT_COMPILED);
365 #endif
366  } else {
368  jinit_upsampler(cinfo);
369  }
370  jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant);
371  }
372  /* Inverse DCT */
373  jinit_inverse_dct(cinfo);
374  /* Entropy decoding: either Huffman or arithmetic coding. */
375  if (cinfo->arith_code) {
376  ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
377  } else {
378  if (cinfo->progressive_mode) {
379 #ifdef D_PROGRESSIVE_SUPPORTED
380  jinit_phuff_decoder(cinfo);
381 #else
382  ERREXIT(cinfo, JERR_NOT_COMPILED);
383 #endif
384  } else
385  jinit_huff_decoder(cinfo);
386  }
387 
388  /* Initialize principal buffer controllers. */
389  use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image;
390  jinit_d_coef_controller(cinfo, use_c_buffer);
391 
392  if (! cinfo->raw_data_out)
393  jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */);
394 
395  /* We can now tell the memory manager to allocate virtual arrays. */
396  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
397 
398  /* Initialize input side of decompressor to consume first scan. */
399  (*cinfo->inputctl->start_input_pass) (cinfo);
400 
401 #ifdef D_MULTISCAN_FILES_SUPPORTED
402  /* If jpeg_start_decompress will read the whole file, initialize
403  * progress monitoring appropriately. The input step is counted
404  * as one pass.
405  */
406  if (cinfo->progress != NULL && ! cinfo->buffered_image &&
407  cinfo->inputctl->has_multiple_scans) {
408  int nscans;
409  /* Estimate number of scans to set pass_limit. */
410  if (cinfo->progressive_mode) {
411  /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
412  nscans = 2 + 3 * cinfo->num_components;
413  } else {
414  /* For a nonprogressive multiscan file, estimate 1 scan per component. */
415  nscans = cinfo->num_components;
416  }
417  cinfo->progress->pass_counter = 0L;
418  cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
419  cinfo->progress->completed_passes = 0;
420  cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2);
421  /* Count the input pass as done */
422  master->pass_number++;
423  }
424 #endif /* D_MULTISCAN_FILES_SUPPORTED */
425 }
426 
427 
428 /*
429  * Per-pass setup.
430  * This is called at the beginning of each output pass. We determine which
431  * modules will be active during this pass and give them appropriate
432  * start_pass calls. We also set is_dummy_pass to indicate whether this
433  * is a "real" output pass or a dummy pass for color quantization.
434  * (In the latter case, jdapistd.c will crank the pass to completion.)
435  */
436 
437 METHODDEF(void)
439 {
440  my_master_ptr master = (my_master_ptr) cinfo->master;
441 
442  if (master->pub.is_dummy_pass) {
443 #ifdef QUANT_2PASS_SUPPORTED
444  /* Final pass of 2-pass quantization */
445  master->pub.is_dummy_pass = FALSE;
446  (*cinfo->cquantize->start_pass) (cinfo, FALSE);
447  (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST);
448  (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST);
449 #else
450  ERREXIT(cinfo, JERR_NOT_COMPILED);
451 #endif /* QUANT_2PASS_SUPPORTED */
452  } else {
453  if (cinfo->quantize_colors && cinfo->colormap == NULL) {
454  /* Select new quantization method */
455  if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) {
456  cinfo->cquantize = master->quantizer_2pass;
457  master->pub.is_dummy_pass = TRUE;
458  } else if (cinfo->enable_1pass_quant) {
459  cinfo->cquantize = master->quantizer_1pass;
460  } else {
461  ERREXIT(cinfo, JERR_MODE_CHANGE);
462  }
463  }
464  (*cinfo->idct->start_pass) (cinfo);
465  (*cinfo->coef->start_output_pass) (cinfo);
466  if (! cinfo->raw_data_out) {
467  if (! master->using_merged_upsample)
468  (*cinfo->cconvert->start_pass) (cinfo);
469  (*cinfo->upsample->start_pass) (cinfo);
470  if (cinfo->quantize_colors)
471  (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass);
472  (*cinfo->post->start_pass) (cinfo,
473  (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
474  (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
475  }
476  }
477 
478  /* Set up progress monitor's pass info if present */
479  if (cinfo->progress != NULL) {
480  cinfo->progress->completed_passes = master->pass_number;
481  cinfo->progress->total_passes = master->pass_number +
482  (master->pub.is_dummy_pass ? 2 : 1);
483  /* In buffered-image mode, we assume one more output pass if EOI not
484  * yet reached, but no more passes if EOI has been reached.
485  */
486  if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) {
487  cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1);
488  }
489  }
490 }
491 
492 
493 /*
494  * Finish up at end of an output pass.
495  */
496 
497 METHODDEF(void)
499 {
500  my_master_ptr master = (my_master_ptr) cinfo->master;
501 
502  if (cinfo->quantize_colors)
503  (*cinfo->cquantize->finish_pass) (cinfo);
504  master->pass_number++;
505 }
506 
507 
508 #ifdef D_MULTISCAN_FILES_SUPPORTED
509 
510 /*
511  * Switch to a new external colormap between output passes.
512  */
513 
514 GLOBAL(void)
516 {
517  my_master_ptr master = (my_master_ptr) cinfo->master;
518 
519  /* Prevent application from calling me at wrong times */
520  if (cinfo->global_state != DSTATE_BUFIMAGE)
521  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
522 
523  if (cinfo->quantize_colors && cinfo->enable_external_quant &&
524  cinfo->colormap != NULL) {
525  /* Select 2-pass quantizer for external colormap use */
526  cinfo->cquantize = master->quantizer_2pass;
527  /* Notify quantizer of colormap change */
528  (*cinfo->cquantize->new_color_map) (cinfo);
529  master->pub.is_dummy_pass = FALSE; /* just in case */
530  } else
531  ERREXIT(cinfo, JERR_MODE_CHANGE);
532 }
533 
534 #endif /* D_MULTISCAN_FILES_SUPPORTED */
535 
536 
537 /*
538  * Initialize master decompression control and select active modules.
539  * This is performed at the start of jpeg_start_decompress.
540  */
541 
542 GLOBAL(void)
544 {
545  my_master_ptr master;
546 
547  master = (my_master_ptr)
548  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
550  cinfo->master = (struct jpeg_decomp_master *) master;
551  master->pub.prepare_for_output_pass = prepare_for_output_pass;
552  master->pub.finish_output_pass = finish_output_pass;
553 
554  master->pub.is_dummy_pass = FALSE;
555 
556  master_selection(cinfo);
557 }
#define CENTERJSAMPLE
Definition: jmorecfg.h:74
jinit_d_main_controller(j_decompress_ptr cinfo, boolean need_full_buffer)
Definition: jdmainct.c:476
char JSAMPLE
Definition: jmorecfg.h:64
JDIMENSION downsampled_width
Definition: jpeglib.h:154
#define FALSE
Definition: OPC_IceHook.h:9
#define DSTATE_BUFIMAGE
Definition: jpegint.h:36
struct jpeg_common_struct * j_common_ptr
Definition: jpeglib.h:261
jinit_d_coef_controller(j_decompress_ptr cinfo, boolean need_full_buffer)
Definition: jdcoefct.c:676
#define ERREXIT(cinfo, code)
Definition: jerror.h:205
#define TRUE
Definition: OPC_IceHook.h:13
#define SIZEOF(object)
Definition: jinclude.h:80
struct jpeg_color_quantizer * quantizer_1pass
Definition: jdmaster.c:31
#define MAXJSAMPLE
Definition: jmorecfg.h:73
jinit_d_post_controller(j_decompress_ptr cinfo, boolean need_full_buffer)
Definition: jdpostct.c:250
jinit_upsampler(j_decompress_ptr cinfo)
Definition: jdsample.c:399
jinit_color_deconverter(j_decompress_ptr cinfo)
Definition: jdcolor.c:304
png_uint_32 i
Definition: png.h:2735
jpeg_component_info * compptr
Definition: jdct.h:102
int pass_number
Definition: jcmaster.c:32
boolean using_merged_upsample
Definition: jdmaster.c:26
jpeg_calc_output_dimensions(j_decompress_ptr cinfo)
Definition: jdmaster.c:84
#define JPOOL_IMAGE
Definition: jpeglib.h:749
struct jpeg_comp_master pub
Definition: jcmaster.c:28
#define MEMCOPY(dest, src, size)
Definition: jinclude.h:68
prepare_range_limit_table(j_decompress_ptr cinfo)
Definition: jdmaster.c:248
finish_output_pass(j_decompress_ptr cinfo)
Definition: jdmaster.c:498
use_merged_upsample(j_decompress_ptr cinfo)
Definition: jdmaster.c:44
#define LOCAL(type)
Definition: jmorecfg.h:186
jinit_merged_upsampler(j_decompress_ptr cinfo)
Definition: jdmerge.c:370
#define DSTATE_READY
Definition: jpegint.h:31
jdiv_round_up(long a, long b)
Definition: jutils.c:72
jinit_phuff_decoder(j_decompress_ptr cinfo)
Definition: jdphuff.c:641
jinit_master_decompress(j_decompress_ptr cinfo)
Definition: jdmaster.c:543
jinit_1pass_quantizer(j_decompress_ptr cinfo)
Definition: jquant1.c:821
#define ERREXIT1(cinfo, code, p1)
Definition: jerror.h:208
struct jpeg_color_quantizer * quantizer_2pass
Definition: jdmaster.c:32
jpeg_new_colormap(j_decompress_ptr cinfo)
Definition: jdmaster.c:515
master_selection(j_decompress_ptr cinfo)
Definition: jdmaster.c:288
#define GLOBAL(type)
Definition: jmorecfg.h:188
#define METHODDEF(type)
Definition: jmorecfg.h:184
my_decomp_master * my_master_ptr
Definition: jdmaster.c:35
#define DCTSIZE
Definition: jpeglib.h:41
unsigned int JDIMENSION
Definition: jmorecfg.h:171
jinit_inverse_dct(j_decompress_ptr cinfo)
Definition: jddctmgr.c:247
prepare_for_output_pass(j_decompress_ptr cinfo)
Definition: jdmaster.c:438
jinit_2pass_quantizer(j_decompress_ptr cinfo)
Definition: jquant2.c:1244
#define MEMZERO(target, size)
Definition: jinclude.h:67
JDIMENSION downsampled_height
Definition: jpeglib.h:155
jinit_huff_decoder(j_decompress_ptr cinfo)
Definition: jdhuff.c:635


openhrp3
Author(s): AIST, General Robotix Inc., Nakamura Lab of Dept. of Mechano Informatics at University of Tokyo
autogenerated on Sat Apr 13 2019 02:14:23