test_spec_req.cpp

Go to the documentation of this file.

/* SPDX-License-Identifier: MPL-2.0 */
 
#include "testutil.hpp"
#include "testutil_unity.hpp"
 
SETUP_TEARDOWN_TESTCONTEXT
 
char connect_address[MAX_SOCKET_STRING];
 
void test_round_robin_out (const char *bind_address_)
{
    void *req = test_context_socket (ZMQ_REQ);
 
    TEST_ASSERT_SUCCESS_ERRNO (zmq_bind (req, bind_address_));
    size_t len = MAX_SOCKET_STRING;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_getsockopt (req, ZMQ_LAST_ENDPOINT, connect_address, &len));
 
    const size_t services = 5;
    void *rep[services];
    for (size_t peer = 0; peer < services; peer++) {
        rep[peer] = test_context_socket (ZMQ_REP);
 
        TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (rep[peer], connect_address));
    }
    //  We have to give the connects time to finish otherwise the requests
    //  will not properly round-robin. We could alternatively connect the
    //  REQ sockets to the REP sockets.
    msleep (SETTLE_TIME * services);
 
    // Send our peer-replies, and expect every REP it used once in order
    for (size_t peer = 0; peer < services; peer++) {
        s_send_seq (req, "ABC", SEQ_END);
        s_recv_seq (rep[peer], "ABC", SEQ_END);
        s_send_seq (rep[peer], "DEF", SEQ_END);
        s_recv_seq (req, "DEF", SEQ_END);
    }
 
    test_context_socket_close_zero_linger (req);
    for (size_t peer = 0; peer < services; peer++)
        test_context_socket_close_zero_linger (rep[peer]);
}
 
void test_req_only_listens_to_current_peer (const char *bind_address_)
{
    void *req = test_context_socket (ZMQ_REQ);
 
    TEST_ASSERT_SUCCESS_ERRNO (zmq_setsockopt (req, ZMQ_ROUTING_ID, "A", 2));
 
    TEST_ASSERT_SUCCESS_ERRNO (zmq_bind (req, bind_address_));
    size_t len = MAX_SOCKET_STRING;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_getsockopt (req, ZMQ_LAST_ENDPOINT, connect_address, &len));
 
    const size_t services = 3;
    void *router[services];
 
    for (size_t i = 0; i < services; ++i) {
        router[i] = test_context_socket (ZMQ_ROUTER);
 
        int enabled = 1;
        TEST_ASSERT_SUCCESS_ERRNO (zmq_setsockopt (
          router[i], ZMQ_ROUTER_MANDATORY, &enabled, sizeof (enabled)));
 
        TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (router[i], connect_address));
    }
 
    // Wait for connects to finish.
    msleep (SETTLE_TIME);
 
    for (size_t i = 0; i < services; ++i) {
        // There still is a race condition when a stale peer's message
        // arrives at the REQ just after a request was sent to that peer.
        // To avoid that happening in the test, sleep for a bit.
        TEST_ASSERT_EQUAL_INT (1,
                               TEST_ASSERT_SUCCESS_ERRNO (zmq_poll (0, 0, 10)));
 
        s_send_seq (req, "ABC", SEQ_END);
 
        // Receive on router i
        s_recv_seq (router[i], "A", 0, "ABC", SEQ_END);
 
        // Send back replies on all routers
        for (size_t j = 0; j < services; ++j) {
            const char *replies[] = {"WRONG", "GOOD"};
            const char *reply = replies[i == j ? 1 : 0];
            s_send_seq (router[j], "A", 0, reply, SEQ_END);
        }
 
        // Receive only the good reply
        s_recv_seq (req, "GOOD", SEQ_END);
    }
 
    test_context_socket_close_zero_linger (req);
    for (size_t i = 0; i < services; ++i)
        test_context_socket_close_zero_linger (router[i]);
}
 
void test_req_message_format (const char *bind_address_)
{
    void *req = test_context_socket (ZMQ_REQ);
    void *router = test_context_socket (ZMQ_ROUTER);
 
    TEST_ASSERT_SUCCESS_ERRNO (zmq_bind (req, bind_address_));
    size_t len = MAX_SOCKET_STRING;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_getsockopt (req, ZMQ_LAST_ENDPOINT, connect_address, &len));
 
    TEST_ASSERT_SUCCESS_ERRNO (zmq_connect (router, connect_address));
 
    // Send a multi-part request.
    s_send_seq (req, "ABC", "DEF", SEQ_END);
 
    zmq_msg_t msg;
    zmq_msg_init (&msg);
 
    // Receive peer routing id
    TEST_ASSERT_SUCCESS_ERRNO (zmq_msg_recv (&msg, router, 0));
    TEST_ASSERT_GREATER_THAN_INT (0, zmq_msg_size (&msg));
    zmq_msg_t peer_id_msg;
    zmq_msg_init (&peer_id_msg);
    zmq_msg_copy (&peer_id_msg, &msg);
 
    int more = 0;
    size_t more_size = sizeof (more);
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_getsockopt (router, ZMQ_RCVMORE, &more, &more_size));
    TEST_ASSERT_TRUE (more);
 
    // Receive the rest.
    s_recv_seq (router, 0, "ABC", "DEF", SEQ_END);
 
    // Send back a single-part reply.
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_msg_send (&peer_id_msg, router, ZMQ_SNDMORE));
    s_send_seq (router, 0, "GHI", SEQ_END);
 
    // Receive reply.
    s_recv_seq (req, "GHI", SEQ_END);
 
    TEST_ASSERT_SUCCESS_ERRNO (zmq_msg_close (&msg));
    TEST_ASSERT_SUCCESS_ERRNO (zmq_msg_close (&peer_id_msg));
 
    test_context_socket_close_zero_linger (req);
    test_context_socket_close_zero_linger (router);
}
 
void test_block_on_send_no_peers ()
{
    void *sc = test_context_socket (ZMQ_REQ);
 
    int timeout = 250;
    TEST_ASSERT_SUCCESS_ERRNO (
      zmq_setsockopt (sc, ZMQ_SNDTIMEO, &timeout, sizeof (timeout)));
 
    TEST_ASSERT_FAILURE_ERRNO (EAGAIN, zmq_send (sc, 0, 0, ZMQ_DONTWAIT));
    TEST_ASSERT_FAILURE_ERRNO (EAGAIN, zmq_send (sc, 0, 0, 0));
 
    test_context_socket_close (sc);
}
 
const char bind_inproc[] = "inproc://a";
const char bind_tcp[] = "tcp://127.0.0.1:*";
 
void test_round_robin_out_inproc ()
{
    test_round_robin_out (bind_inproc);
}
 
void test_round_robin_out_tcp ()
{
    test_round_robin_out (bind_tcp);
}
 
void test_req_message_format_inproc ()
{
    test_req_message_format (bind_inproc);
}
 
void test_req_message_format_tcp ()
{
    test_req_message_format (bind_tcp);
}
 
void test_req_only_listens_to_current_peer_inproc ()
{
    test_req_only_listens_to_current_peer (bind_inproc);
}
 
void test_req_only_listens_to_current_peer_tcp ()
{
    test_req_only_listens_to_current_peer (bind_tcp);
}
 
int main ()
{
    setup_test_environment ();
 
    UNITY_BEGIN ();
 
    // SHALL route outgoing messages to connected peers using a round-robin
    // strategy.
    RUN_TEST (test_round_robin_out_inproc);
    RUN_TEST (test_round_robin_out_tcp);
 
    // The request and reply messages SHALL have this format on the wire:
    // * A delimiter, consisting of an empty frame, added by the REQ socket.
    // * One or more data frames, comprising the message visible to the
    //   application.
    RUN_TEST (test_req_message_format_inproc);
    RUN_TEST (test_req_message_format_tcp);
 
    // SHALL block on sending, or return a suitable error, when it has no
    // connected peers.
    RUN_TEST (test_block_on_send_no_peers);
 
    // SHALL accept an incoming message only from the last peer that it sent a
    // request to.
    // SHALL discard silently any messages received from other peers.
    // TODO PH: this test is still failing; disabled for now to allow build to
    // complete.
    // RUN_TEST (test_req_only_listens_to_current_peer_inproc);
    // RUN_TEST (test_req_only_listens_to_current_peer_tcp);
 
    return UNITY_END ();
}