FSMC NOR/SRAM Init structure definition. More...
#include <stm32f4xx_fsmc.h>
Public Attributes | |
| uint32_t | FSMC_AsynchronousWait |
| uint32_t | FSMC_Bank |
| uint32_t | FSMC_BurstAccessMode |
| uint32_t | FSMC_DataAddressMux |
| uint32_t | FSMC_ExtendedMode |
| uint32_t | FSMC_MemoryDataWidth |
| uint32_t | FSMC_MemoryType |
| FSMC_NORSRAMTimingInitTypeDef * | FSMC_ReadWriteTimingStruct |
| uint32_t | FSMC_WaitSignal |
| uint32_t | FSMC_WaitSignalActive |
| uint32_t | FSMC_WaitSignalPolarity |
| uint32_t | FSMC_WrapMode |
| uint32_t | FSMC_WriteBurst |
| uint32_t | FSMC_WriteOperation |
| FSMC_NORSRAMTimingInitTypeDef * | FSMC_WriteTimingStruct |
FSMC NOR/SRAM Init structure definition.
Definition at line 94 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_AsynchronousWait |
Enables or disables wait signal during asynchronous transfers, valid only with asynchronous Flash memories. This parameter can be a value of FSMC_AsynchronousWait
Definition at line 114 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_Bank |
Specifies the NOR/SRAM memory bank that will be used. This parameter can be a value of FSMC_NORSRAM_Bank
Definition at line 96 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_BurstAccessMode |
Enables or disables the burst access mode for Flash memory, valid only with synchronous burst Flash memories. This parameter can be a value of FSMC_Burst_Access_Mode
Definition at line 110 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_DataAddressMux |
Specifies whether the address and data values are multiplexed on the data bus or not. This parameter can be a value of FSMC_Data_Address_Bus_Multiplexing
Specifies whether the address and data values are multiplexed on the databus or not. This parameter can be a value of FSMC_Data_Address_Bus_Multiplexing
Definition at line 99 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_ExtendedMode |
Enables or disables the extended mode. This parameter can be a value of FSMC_Extended_Mode
Definition at line 138 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_MemoryDataWidth |
Specifies the external memory device width. This parameter can be a value of FSMC_Data_Width
Definition at line 107 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_MemoryType |
Specifies the type of external memory attached to the corresponding memory bank. This parameter can be a value of FSMC_Memory_Type
Definition at line 103 of file stm32f4xx_fsmc.h.
| FSMC_NORSRAMTimingInitTypeDef * FSMC_NORSRAMInitTypeDef::FSMC_ReadWriteTimingStruct |
Timing Parameters for write and read access if the Extended Mode is not used
Timing Parameters for write and read access if the ExtendedMode is not used
Definition at line 144 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_WaitSignal |
Enables or disables the wait state insertion via wait signal, valid for Flash memory access in burst mode. This parameter can be a value of FSMC_Wait_Signal
Enables or disables the wait-state insertion via wait signal, valid for Flash memory access in burst mode. This parameter can be a value of FSMC_Wait_Signal
Definition at line 134 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_WaitSignalActive |
Specifies if the wait signal is asserted by the memory one clock cycle before the wait state or during the wait state, valid only when accessing memories in burst mode. This parameter can be a value of FSMC_Wait_Timing
Definition at line 126 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_WaitSignalPolarity |
Specifies the wait signal polarity, valid only when accessing the Flash memory in burst mode. This parameter can be a value of FSMC_Wait_Signal_Polarity
Definition at line 118 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_WrapMode |
Enables or disables the Wrapped burst access mode for Flash memory, valid only when accessing Flash memories in burst mode. This parameter can be a value of FSMC_Wrap_Mode
Definition at line 122 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_WriteBurst |
Enables or disables the write burst operation. This parameter can be a value of FSMC_Write_Burst
Definition at line 141 of file stm32f4xx_fsmc.h.
| uint32_t FSMC_NORSRAMInitTypeDef::FSMC_WriteOperation |
Enables or disables the write operation in the selected bank by the FSMC. This parameter can be a value of FSMC_Write_Operation
Definition at line 131 of file stm32f4xx_fsmc.h.
| FSMC_NORSRAMTimingInitTypeDef * FSMC_NORSRAMInitTypeDef::FSMC_WriteTimingStruct |
Timing Parameters for write access if the Extended Mode is used
Timing Parameters for write access if the ExtendedMode is used
Definition at line 146 of file stm32f4xx_fsmc.h.