Classes | Macros | Functions
stm32f10x_spi.h File Reference

This file contains all the functions prototypes for the SPI firmware library. More...

#include "stm32f10x.h"
Include dependency graph for stm32f10x_spi.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes

struct  I2S_InitTypeDef
 I2S Init structure definition. More...
 
struct  SPI_InitTypeDef
 SPI Init structure definition. More...
 

Macros

#define I2S_AudioFreq_11k   ((uint32_t)11025)
 
#define I2S_AudioFreq_16k   ((uint32_t)16000)
 
#define I2S_AudioFreq_192k   ((uint32_t)192000)
 
#define I2S_AudioFreq_22k   ((uint32_t)22050)
 
#define I2S_AudioFreq_32k   ((uint32_t)32000)
 
#define I2S_AudioFreq_44k   ((uint32_t)44100)
 
#define I2S_AudioFreq_48k   ((uint32_t)48000)
 
#define I2S_AudioFreq_8k   ((uint32_t)8000)
 
#define I2S_AudioFreq_96k   ((uint32_t)96000)
 
#define I2S_AudioFreq_Default   ((uint32_t)2)
 
#define I2S_CPOL_High   ((uint16_t)0x0008)
 
#define I2S_CPOL_Low   ((uint16_t)0x0000)
 
#define I2S_DataFormat_16b   ((uint16_t)0x0000)
 
#define I2S_DataFormat_16bextended   ((uint16_t)0x0001)
 
#define I2S_DataFormat_24b   ((uint16_t)0x0003)
 
#define I2S_DataFormat_32b   ((uint16_t)0x0005)
 
#define I2S_FLAG_CHSIDE   ((uint16_t)0x0004)
 
#define I2S_FLAG_UDR   ((uint16_t)0x0008)
 
#define I2S_IT_UDR   ((uint8_t)0x53)
 
#define I2S_MCLKOutput_Disable   ((uint16_t)0x0000)
 
#define I2S_MCLKOutput_Enable   ((uint16_t)0x0200)
 
#define I2S_Mode_MasterRx   ((uint16_t)0x0300)
 
#define I2S_Mode_MasterTx   ((uint16_t)0x0200)
 
#define I2S_Mode_SlaveRx   ((uint16_t)0x0100)
 
#define I2S_Mode_SlaveTx   ((uint16_t)0x0000)
 
#define I2S_Standard_LSB   ((uint16_t)0x0020)
 
#define I2S_Standard_MSB   ((uint16_t)0x0010)
 
#define I2S_Standard_PCMLong   ((uint16_t)0x00B0)
 
#define I2S_Standard_PCMShort   ((uint16_t)0x0030)
 
#define I2S_Standard_Phillips   ((uint16_t)0x0000)
 
#define IS_I2S_AUDIO_FREQ(FREQ)
 
#define IS_I2S_CPOL(CPOL)
 
#define IS_I2S_DATA_FORMAT(FORMAT)
 
#define IS_I2S_MCLK_OUTPUT(OUTPUT)
 
#define IS_I2S_MODE(MODE)
 
#define IS_I2S_STANDARD(STANDARD)
 
#define IS_SPI_23_PERIPH(PERIPH)
 
#define IS_SPI_ALL_PERIPH(PERIPH)
 
#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER)
 
#define IS_SPI_CPHA(CPHA)
 
#define IS_SPI_CPOL(CPOL)
 
#define IS_SPI_CRC(CRC)   (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
 
#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL)   ((POLYNOMIAL) >= 0x1)
 
#define IS_SPI_DATASIZE(DATASIZE)
 
#define IS_SPI_DIRECTION(DIRECTION)
 
#define IS_SPI_DIRECTION_MODE(MODE)
 
#define IS_SPI_FIRST_BIT(BIT)
 
#define IS_SPI_I2S_CLEAR_FLAG(FLAG)   (((FLAG) == SPI_FLAG_CRCERR))
 
#define IS_SPI_I2S_CLEAR_IT(IT)   (((IT) == SPI_IT_CRCERR))
 
#define IS_SPI_I2S_CONFIG_IT(IT)
 
#define IS_SPI_I2S_DMAREQ(DMAREQ)   ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
 
#define IS_SPI_I2S_GET_FLAG(FLAG)
 
#define IS_SPI_I2S_GET_IT(IT)
 
#define IS_SPI_MODE(MODE)
 
#define IS_SPI_NSS(NSS)
 
#define IS_SPI_NSS_INTERNAL(INTERNAL)
 
#define SPI_BaudRatePrescaler_128   ((uint16_t)0x0030)
 
#define SPI_BaudRatePrescaler_16   ((uint16_t)0x0018)
 
#define SPI_BaudRatePrescaler_2   ((uint16_t)0x0000)
 
#define SPI_BaudRatePrescaler_256   ((uint16_t)0x0038)
 
#define SPI_BaudRatePrescaler_32   ((uint16_t)0x0020)
 
#define SPI_BaudRatePrescaler_4   ((uint16_t)0x0008)
 
#define SPI_BaudRatePrescaler_64   ((uint16_t)0x0028)
 
#define SPI_BaudRatePrescaler_8   ((uint16_t)0x0010)
 
#define SPI_CPHA_1Edge   ((uint16_t)0x0000)
 
#define SPI_CPHA_2Edge   ((uint16_t)0x0001)
 
#define SPI_CPOL_High   ((uint16_t)0x0002)
 
#define SPI_CPOL_Low   ((uint16_t)0x0000)
 
#define SPI_CRC_Rx   ((uint8_t)0x01)
 
#define SPI_CRC_Tx   ((uint8_t)0x00)
 
#define SPI_DataSize_16b   ((uint16_t)0x0800)
 
#define SPI_DataSize_8b   ((uint16_t)0x0000)
 
#define SPI_Direction_1Line_Rx   ((uint16_t)0x8000)
 
#define SPI_Direction_1Line_Tx   ((uint16_t)0xC000)
 
#define SPI_Direction_2Lines_FullDuplex   ((uint16_t)0x0000)
 
#define SPI_Direction_2Lines_RxOnly   ((uint16_t)0x0400)
 
#define SPI_Direction_Rx   ((uint16_t)0xBFFF)
 
#define SPI_Direction_Tx   ((uint16_t)0x4000)
 
#define SPI_FirstBit_LSB   ((uint16_t)0x0080)
 
#define SPI_FirstBit_MSB   ((uint16_t)0x0000)
 
#define SPI_FLAG_CRCERR   ((uint16_t)0x0010)
 
#define SPI_FLAG_MODF   ((uint16_t)0x0020)
 
#define SPI_I2S_DMAReq_Rx   ((uint16_t)0x0001)
 
#define SPI_I2S_DMAReq_Tx   ((uint16_t)0x0002)
 
#define SPI_I2S_FLAG_BSY   ((uint16_t)0x0080)
 
#define SPI_I2S_FLAG_OVR   ((uint16_t)0x0040)
 
#define SPI_I2S_FLAG_RXNE   ((uint16_t)0x0001)
 
#define SPI_I2S_FLAG_TXE   ((uint16_t)0x0002)
 
#define SPI_I2S_IT_ERR   ((uint8_t)0x50)
 
#define SPI_I2S_IT_OVR   ((uint8_t)0x56)
 
#define SPI_I2S_IT_RXNE   ((uint8_t)0x60)
 
#define SPI_I2S_IT_TXE   ((uint8_t)0x71)
 
#define SPI_IT_CRCERR   ((uint8_t)0x54)
 
#define SPI_IT_MODF   ((uint8_t)0x55)
 
#define SPI_Mode_Master   ((uint16_t)0x0104)
 
#define SPI_Mode_Slave   ((uint16_t)0x0000)
 
#define SPI_NSS_Hard   ((uint16_t)0x0000)
 
#define SPI_NSS_Soft   ((uint16_t)0x0200)
 
#define SPI_NSSInternalSoft_Reset   ((uint16_t)0xFEFF)
 
#define SPI_NSSInternalSoft_Set   ((uint16_t)0x0100)
 

Functions

void I2S_Cmd (SPI_TypeDef *SPIx, FunctionalState NewState)
 Enables or disables the specified SPI peripheral (in I2S mode). More...
 
void I2S_Init (SPI_TypeDef *SPIx, I2S_InitTypeDef *I2S_InitStruct)
 Initializes the SPIx peripheral according to the specified parameters in the I2S_InitStruct. More...
 
void I2S_StructInit (I2S_InitTypeDef *I2S_InitStruct)
 Fills each I2S_InitStruct member with its default value. More...
 
void SPI_BiDirectionalLineConfig (SPI_TypeDef *SPIx, uint16_t SPI_Direction)
 Selects the data transfer direction in bidirectional mode for the specified SPI. More...
 
void SPI_CalculateCRC (SPI_TypeDef *SPIx, FunctionalState NewState)
 Enables or disables the CRC value calculation of the transferred bytes. More...
 
void SPI_Cmd (SPI_TypeDef *SPIx, FunctionalState NewState)
 Enables or disables the specified SPI peripheral. More...
 
void SPI_DataSizeConfig (SPI_TypeDef *SPIx, uint16_t SPI_DataSize)
 Configures the data size for the selected SPI. More...
 
uint16_t SPI_GetCRC (SPI_TypeDef *SPIx, uint8_t SPI_CRC)
 Returns the transmit or the receive CRC register value for the specified SPI. More...
 
uint16_t SPI_GetCRCPolynomial (SPI_TypeDef *SPIx)
 Returns the CRC Polynomial register value for the specified SPI. More...
 
void SPI_I2S_ClearFlag (SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG)
 Clears the SPIx CRC Error (CRCERR) flag. More...
 
void SPI_I2S_ClearITPendingBit (SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT)
 Clears the SPIx CRC Error (CRCERR) interrupt pending bit. More...
 
void SPI_I2S_DeInit (SPI_TypeDef *SPIx)
 De-initialize the SPIx peripheral registers to their default reset values. More...
 
void SPI_I2S_DMACmd (SPI_TypeDef *SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
 Enables or disables the SPIx/I2Sx DMA interface. More...
 
FlagStatus SPI_I2S_GetFlagStatus (SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG)
 Checks whether the specified SPIx/I2Sx flag is set or not. More...
 
ITStatus SPI_I2S_GetITStatus (SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT)
 Checks whether the specified SPIx/I2Sx interrupt has occurred or not. More...
 
void SPI_I2S_ITConfig (SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState)
 Enables or disables the specified SPI/I2S interrupts. More...
 
uint16_t SPI_I2S_ReceiveData (SPI_TypeDef *SPIx)
 Returns the most recent received data by the SPIx/I2Sx peripheral. More...
 
void SPI_I2S_SendData (SPI_TypeDef *SPIx, uint16_t Data)
 Transmits a Data through the SPIx/I2Sx peripheral. More...
 
void SPI_Init (SPI_TypeDef *SPIx, SPI_InitTypeDef *SPI_InitStruct)
 Initializes the SPIx peripheral according to the specified parameters in the SPI_InitStruct. More...
 
void SPI_NSSInternalSoftwareConfig (SPI_TypeDef *SPIx, uint16_t SPI_NSSInternalSoft)
 Configures internally by software the NSS pin for the selected SPI. More...
 
void SPI_SSOutputCmd (SPI_TypeDef *SPIx, FunctionalState NewState)
 Enables or disables the SS output for the selected SPI. More...
 
void SPI_StructInit (SPI_InitTypeDef *SPI_InitStruct)
 Fills each SPI_InitStruct member with its default value. More...
 
void SPI_TransmitCRC (SPI_TypeDef *SPIx)
 Transmit the SPIx CRC value. More...
 

Detailed Description

This file contains all the functions prototypes for the SPI firmware library.

Author
MCD Application Team
Version
V3.5.0
Date
11-March-2011
Attention

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

© COPYRIGHT 2011 STMicroelectronics

Definition in file stm32f10x_spi.h.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Apr 15 2021 05:07:52