WakeUp pin configuration functions. More...

Collaboration diagram for WakeUp pin configuration functions:

Functions
void	PWR_WakeUpPinCmd (uint32_t PWR_WakeUpPin, FunctionalState NewState)
	Enables or disables the WakeUp Pin functionality. More...

void	PWR_WakeUpPinCmd (FunctionalState NewState)
	Enables or disables the WakeUp Pin functionality. More...

Detailed Description

WakeUp pin configuration functions.

WakeUp pins configuration functions.

 ===============================================================================
                 ##### WakeUp pin configuration functions #####
 ===============================================================================  
    [..]
      (+) WakeUp pin is used to wakeup the system from Standby mode. This pin is 
          forced in input pull down configuration and is active on rising edges.
      (+) There is only one WakeUp pin: WakeUp Pin 1 on PA.00.

 ===============================================================================
              ##### WakeUp pins configuration functions #####
 ===============================================================================  
    [..]
    (+) WakeUp pins are used to wakeup the system from Standby mode. These pins are 
        forced in input pull down configuration and are active on rising edges.
    (+) There are three WakeUp pins: WakeUp Pin 1 on PA.00, WakeUp Pin 2 on PC.13 and
        WakeUp Pin 3 on PE.06.

Function Documentation

void PWR_WakeUpPinCmd	(	uint32_t	PWR_WakeUpPin,
		FunctionalState	NewState
	)

Enables or disables the WakeUp Pin functionality.

Parameters

PWR_WakeUpPin	specifies the WakeUpPin. This parameter can be: PWR_WakeUpPin_1, PWR_WakeUpPin_2 or PWR_WakeUpPin_3.
NewState	new state of the WakeUp Pin functionality. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 219 of file stm32f30x_pwr.c.

void PWR_WakeUpPinCmd ( FunctionalState NewState )

Enables or disables the WakeUp Pin functionality.

Parameters

NewState new state of the WakeUp Pin functionality. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 249 of file stm32f4xx_pwr.c.

Functions

Detailed Description

Function Documentation