Collaboration diagram for DAC_Private_Functions:
|
Modules | |
| DAC channels configuration | |
| DAC channels configuration: trigger, output buffer, data format. | |
| DMA management functions | |
| DMA management functions. | |
| Interrupts and flags management functions | |
| Interrupts and flags management functions. | |
Functions | |
| void | DAC_Cmd (uint32_t DAC_Channel, FunctionalState NewState) |
| Enables or disables the specified DAC channel. More... | |
| void | DAC_DeInit (void) |
| Deinitializes the DAC peripheral registers to their default reset values. More... | |
| void | DAC_DMACmd (uint32_t DAC_Channel, FunctionalState NewState) |
| Enables or disables the specified DAC channel DMA request. More... | |
| void | DAC_DualSoftwareTriggerCmd (FunctionalState NewState) |
| Enables or disables simultaneously the two DAC channels software triggers. More... | |
| uint16_t | DAC_GetDataOutputValue (uint32_t DAC_Channel) |
| Returns the last data output value of the selected DAC channel. More... | |
| void | DAC_Init (uint32_t DAC_Channel, DAC_InitTypeDef *DAC_InitStruct) |
| Initializes the DAC peripheral according to the specified parameters in the DAC_InitStruct. More... | |
| void | DAC_SetChannel1Data (uint32_t DAC_Align, uint16_t Data) |
| Set the specified data holding register value for DAC channel1. More... | |
| void | DAC_SetChannel2Data (uint32_t DAC_Align, uint16_t Data) |
| Set the specified data holding register value for DAC channel2. More... | |
| void | DAC_SetDualChannelData (uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) |
| Set the specified data holding register value for dual channel DAC. More... | |
| void | DAC_SoftwareTriggerCmd (uint32_t DAC_Channel, FunctionalState NewState) |
| Enables or disables the selected DAC channel software trigger. More... | |
| void | DAC_StructInit (DAC_InitTypeDef *DAC_InitStruct) |
| Fills each DAC_InitStruct member with its default value. More... | |
| void | DAC_WaveGenerationCmd (uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) |
| Enables or disables the selected DAC channel wave generation. More... | |
Detailed Description
Function Documentation
| void DAC_Cmd | ( | uint32_t | DAC_Channel, |
| FunctionalState | NewState | ||
| ) |
Enables or disables the specified DAC channel.
- Parameters
-
DAC_Channel the selected DAC channel. This parameter can be one of the following values: - DAC_Channel_1: DAC Channel1 selected
- DAC_Channel_2: DAC Channel2 selected
NewState new state of the DAC channel. This parameter can be: ENABLE or DISABLE.
- Return values
-
None
Definition at line 173 of file stm32f10x_dac.c.
| void DAC_DeInit | ( | void | ) |
Deinitializes the DAC peripheral registers to their default reset values.
- Parameters
-
None
- Return values
-
None
Definition at line 98 of file stm32f10x_dac.c.
| void DAC_DMACmd | ( | uint32_t | DAC_Channel, |
| FunctionalState | NewState | ||
| ) |
Enables or disables the specified DAC channel DMA request.
- Parameters
-
DAC_Channel the selected DAC channel. This parameter can be one of the following values: - DAC_Channel_1: DAC Channel1 selected
- DAC_Channel_2: DAC Channel2 selected
NewState new state of the selected DAC channel DMA request. This parameter can be: ENABLE or DISABLE.
- Return values
-
None
Definition at line 233 of file stm32f10x_dac.c.
| void DAC_DualSoftwareTriggerCmd | ( | FunctionalState | NewState | ) |
Enables or disables simultaneously the two DAC channels software triggers.
- Parameters
-
NewState new state of the DAC channels software triggers. This parameter can be: ENABLE or DISABLE.
- Return values
-
None
Definition at line 284 of file stm32f10x_dac.c.
| uint16_t DAC_GetDataOutputValue | ( | uint32_t | DAC_Channel | ) |
Returns the last data output value of the selected DAC channel.
- Parameters
-
DAC_Channel the selected DAC channel. This parameter can be one of the following values: - DAC_Channel_1: DAC Channel1 selected
- DAC_Channel_2: DAC Channel2 selected
- Return values
-
The selected DAC channel data output value.
Definition at line 430 of file stm32f10x_dac.c.
| void DAC_Init | ( | uint32_t | DAC_Channel, |
| DAC_InitTypeDef * | DAC_InitStruct | ||
| ) |
Initializes the DAC peripheral according to the specified parameters in the DAC_InitStruct.
- Parameters
-
DAC_Channel the selected DAC channel. This parameter can be one of the following values: - DAC_Channel_1: DAC Channel1 selected
- DAC_Channel_2: DAC Channel2 selected
DAC_InitStruct pointer to a DAC_InitTypeDef structure that contains the configuration information for the specified DAC channel.
- Return values
-
None
Definition at line 117 of file stm32f10x_dac.c.
| void DAC_SetChannel1Data | ( | uint32_t | DAC_Align, |
| uint16_t | Data | ||
| ) |
Set the specified data holding register value for DAC channel1.
- Parameters
-
DAC_Align Specifies the data alignment for DAC channel1. This parameter can be one of the following values: - DAC_Align_8b_R: 8bit right data alignment selected
- DAC_Align_12b_L: 12bit left data alignment selected
- DAC_Align_12b_R: 12bit right data alignment selected
Data : Data to be loaded in the selected data holding register.
- Return values
-
None
Definition at line 342 of file stm32f10x_dac.c.
| void DAC_SetChannel2Data | ( | uint32_t | DAC_Align, |
| uint16_t | Data | ||
| ) |
Set the specified data holding register value for DAC channel2.
- Parameters
-
DAC_Align Specifies the data alignment for DAC channel2. This parameter can be one of the following values: - DAC_Align_8b_R: 8bit right data alignment selected
- DAC_Align_12b_L: 12bit left data alignment selected
- DAC_Align_12b_R: 12bit right data alignment selected
Data : Data to be loaded in the selected data holding register.
- Return values
-
None
Definition at line 367 of file stm32f10x_dac.c.
| void DAC_SetDualChannelData | ( | uint32_t | DAC_Align, |
| uint16_t | Data2, | ||
| uint16_t | Data1 | ||
| ) |
Set the specified data holding register value for dual channel DAC.
- Parameters
-
DAC_Align Specifies the data alignment for dual channel DAC. This parameter can be one of the following values: - DAC_Align_8b_R: 8bit right data alignment selected
- DAC_Align_12b_L: 12bit left data alignment selected
- DAC_Align_12b_R: 12bit right data alignment selected
Data2 Data for DAC Channel2 to be loaded in the selected data holding register. Data1 Data for DAC Channel1 to be loaded in the selected data holding register.
- Return values
-
None
Definition at line 396 of file stm32f10x_dac.c.
| void DAC_SoftwareTriggerCmd | ( | uint32_t | DAC_Channel, |
| FunctionalState | NewState | ||
| ) |
Enables or disables the selected DAC channel software trigger.
- Parameters
-
DAC_Channel the selected DAC channel. This parameter can be one of the following values: - DAC_Channel_1: DAC Channel1 selected
- DAC_Channel_2: DAC Channel2 selected
NewState new state of the selected DAC channel software trigger. This parameter can be: ENABLE or DISABLE.
- Return values
-
None
Definition at line 260 of file stm32f10x_dac.c.
| void DAC_StructInit | ( | DAC_InitTypeDef * | DAC_InitStruct | ) |
Fills each DAC_InitStruct member with its default value.
- Parameters
-
DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will be initialized.
- Return values
-
None
Definition at line 150 of file stm32f10x_dac.c.
| void DAC_WaveGenerationCmd | ( | uint32_t | DAC_Channel, |
| uint32_t | DAC_Wave, | ||
| FunctionalState | NewState | ||
| ) |
Enables or disables the selected DAC channel wave generation.
- Parameters
-
DAC_Channel the selected DAC channel. This parameter can be one of the following values: - DAC_Channel_1: DAC Channel1 selected
- DAC_Channel_2: DAC Channel2 selected
DAC_Wave Specifies the wave type to enable or disable. This parameter can be one of the following values: - DAC_Wave_Noise: noise wave generation
- DAC_Wave_Triangle: triangle wave generation
NewState new state of the selected DAC channel wave generation. This parameter can be: ENABLE or DISABLE.
- Return values
-
None
Definition at line 314 of file stm32f10x_dac.c.