Functions

Regular Channels Configuration functions. More...

Collaboration diagram for Regular Channels Configuration functions:

Functions

void ADC_ChannelOffset1Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the Offset1. More...
 
void ADC_ChannelOffset2Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the Offset2. More...
 
void ADC_ChannelOffset3Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the Offset3. More...
 
void ADC_ChannelOffset4Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the Offset4. More...
 
void ADC_ContinuousModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the ADC continuous conversion mode. More...
 
void ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number)
 Configures the discontinuous mode for the selected ADC regular group channel. More...
 
void ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the discontinuous mode on regular group channel for the specified ADC. More...
 
void ADC_EOCOnEachRegularChannelCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the EOC on each regular channel conversion. More...
 
void ADC_ExternalTriggerConfig (ADC_TypeDef *ADCx, uint16_t ADC_ExternalTrigConvEvent, uint16_t ADC_ExternalTrigEventEdge)
 External Trigger Enable and Polarity Selection for regular channels. More...
 
uint16_t ADC_GetConversionValue (ADC_TypeDef *ADCx)
 Returns the last ADCx conversion result data for regular channel. More...
 
uint32_t ADC_GetDualModeConversionValue (ADC_TypeDef *ADCx)
 Returns the last ADC1, ADC2, ADC3 and ADC4 regular conversions results data in the selected dual mode. More...
 
uint32_t ADC_GetMultiModeConversionValue (void)
 Returns the last ADC1, ADC2 and ADC3 regular conversions results data in the selected multi mode. More...
 
FlagStatus ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC Software start regular conversion Status. More...
 
FlagStatus ADC_GetStartConversionStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC start conversion Status. More...
 
void ADC_RegularChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
 Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. More...
 
void ADC_RegularChannelSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t SequencerLength)
 Sets the ADC regular channel sequence lenght. More...
 
void ADC_SetChannelOffset1 (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint16_t Offset)
 Set the ADC channels conversion value offset1. More...
 
void ADC_SetChannelOffset2 (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint16_t Offset)
 Set the ADC channels conversion value offset2. More...
 
void ADC_SetChannelOffset3 (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint16_t Offset)
 Set the ADC channels conversion value offset3. More...
 
void ADC_SetChannelOffset4 (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint16_t Offset)
 Set the ADC channels conversion value offset4. More...
 
void ADC_SoftwareStartConv (ADC_TypeDef *ADCx)
 Enables the selected ADC software start conversion of the regular channels. More...
 
void ADC_StartConversion (ADC_TypeDef *ADCx)
 Enables or disables the selected ADC start conversion . More...
 
void ADC_StopConversion (ADC_TypeDef *ADCx)
 Stops the selected ADC ongoing conversion. More...
 

Detailed Description

Regular Channels Configuration functions.

 ===============================================================================
             ##### Regular Channels Configuration functions #####
 ===============================================================================  

    [..] This section provides functions allowing to manage the ADC's regular channels,
         it is composed of 2 sub sections : 
  
      (#) Configuration and management functions for regular channels: This subsection 
          provides functions allowing to configure the ADC regular channels :    
         (++) Configure the rank in the regular group sequencer for each channel
         (++) Configure the sampling time for each channel
         (++) select the conversion Trigger for regular channels
         (++) select the desired EOC event behavior configuration
         (++) Activate the continuous Mode  (*)
         (++) Activate the Discontinuous Mode 
         -@@- Please Note that the following features for regular channels 
             are configurated using the ADC_Init() function : 
           (+@@) scan mode activation 
           (+@@) continuous mode activation (**) 
           (+@@) External trigger source  
           (+@@) External trigger edge 
           (+@@) number of conversion in the regular channels group sequencer.
     
         -@@- (*) and (**) are performing the same configuration
     
      (#) Get the conversion data: This subsection provides an important function in 
          the ADC peripheral since it returns the converted data of the current 
          regular channel. When the Conversion value is read, the EOC Flag is 
          automatically cleared.
     
          -@- For multi ADC mode, the last ADC1, ADC2 and ADC3 regular conversions 
              results data (in the selected multi mode) can be returned in the same 
              time using ADC_GetMultiModeConversionValue() function. 
 ===============================================================================
                  ##### Channels Configuration functions #####
 ===============================================================================  

  [..] This section provides functions allowing to manage the ADC regular channels.
   
  [..] To configure a regular sequence of channels use:
   (#) ADC_RegularChannelConfig()
       this fuction allows:
       (++) Configure the rank in the regular group sequencer for each channel
       (++) Configure the sampling time for each channel

   (#) ADC_RegularChannelSequencerLengthConfig() to set the length of the regular sequencer

   [..] The regular trigger is configured using the following functions:
   (#) ADC_SelectExternalTrigger()
   (#) ADC_ExternalTriggerPolarityConfig()

   [..] The start and the stop conversion are controlled by:
   (#) ADC_StartConversion()
   (#) ADC_StopConversion()
    
   [..] 
   (@)Please Note that the following features for regular channels are configurated
     using the ADC_Init() function : 
          (++) continuous mode activation
          (++) Resolution  
          (++) Data Alignement 
          (++) Overrun Mode.
     
  [..] Get the conversion data: This subsection provides an important function in 
     the ADC peripheral since it returns the converted data of the current 
     regular channel. When the Conversion value is read, the EOC Flag is 
     automatically cleared.

  [..] To configure the  discontinous mode, the following functions should be used:
   (#) ADC_DiscModeChannelCountConfig() to configure the number of discontinuous channel to be converted.
   (#) ADC_DiscModeCmd() to enable the discontinuous mode.

  [..] To configure and enable/disable the Channel offset use the functions:
     (++) ADC_SetChannelOffset1()
     (++) ADC_SetChannelOffset2()
     (++) ADC_SetChannelOffset3()
     (++) ADC_SetChannelOffset4()
     (++) ADC_ChannelOffset1Cmd()
     (++) ADC_ChannelOffset2Cmd()
     (++) ADC_ChannelOffset3Cmd()
     (++) ADC_ChannelOffset4Cmd()

Function Documentation

void ADC_ChannelOffset1Cmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the Offset1.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
NewStatenew state of the ADCx offset1. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1628 of file stm32f30x_adc.c.

void ADC_ChannelOffset2Cmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the Offset2.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
NewStatenew state of the ADCx offset2. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1653 of file stm32f30x_adc.c.

void ADC_ChannelOffset3Cmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the Offset3.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
NewStatenew state of the ADCx offset3. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1678 of file stm32f30x_adc.c.

void ADC_ChannelOffset4Cmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the Offset4.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
NewStatenew state of the ADCx offset4. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1703 of file stm32f30x_adc.c.

void ADC_ContinuousModeCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the ADC continuous conversion mode.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC continuous conversion mode This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 900 of file stm32f4xx_adc.c.

void ADC_DiscModeChannelCountConfig ( ADC_TypeDef ADCx,
uint8_t  Number 
)

Configures the discontinuous mode for the selected ADC regular group channel.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Numberspecifies the discontinuous mode regular channel count value. This number must be between 1 and 8.
Return values
None
Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
Numberspecifies the discontinuous mode regular channel count value. This number must be between 1 and 8.
Return values
None

Definition at line 926 of file stm32f4xx_adc.c.

void ADC_DiscModeCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the discontinuous mode on regular group channel for the specified ADC.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC discontinuous mode on regular group channel. This parameter can be: ENABLE or DISABLE.
Return values
None
Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
NewStatenew state of the selected ADC discontinuous mode on regular group channel. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 958 of file stm32f4xx_adc.c.

void ADC_EOCOnEachRegularChannelCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the EOC on each regular channel conversion.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC EOC flag rising This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 875 of file stm32f4xx_adc.c.

void ADC_ExternalTriggerConfig ( ADC_TypeDef ADCx,
uint16_t  ADC_ExternalTrigConvEvent,
uint16_t  ADC_ExternalTrigEventEdge 
)

External Trigger Enable and Polarity Selection for regular channels.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_ExternalTrigConvEventADC external Trigger source. This parameter can be one of the following values:
  • ADC_ExternalTrigger_Event0: External trigger event 0
  • ADC_ExternalTrigger_Event1: External trigger event 1
  • ADC_ExternalTrigger_Event2: External trigger event 2
  • ADC_ExternalTrigger_Event3: External trigger event 3
  • ADC_ExternalTrigger_Event4: External trigger event 4
  • ADC_ExternalTrigger_Event5: External trigger event 5
  • ADC_ExternalTrigger_Event6: External trigger event 6
  • ADC_ExternalTrigger_Event7: External trigger event 7
  • ADC_ExternalTrigger_Event8: External trigger event 8
  • ADC_ExternalTrigger_Event9: External trigger event 9
  • ADC_ExternalTrigger_Event10: External trigger event 10
  • ADC_ExternalTrigger_Event11: External trigger event 11
  • ADC_ExternalTrigger_Event12: External trigger event 12
  • ADC_ExternalTrigger_Event13: External trigger event 13
  • ADC_ExternalTrigger_Event14: External trigger event 14
  • ADC_ExternalTrigger_Event15: External trigger event 15
ADC_ExternalTrigEventEdgeADC external Trigger Polarity. This parameter can be one of the following values:
  • ADC_ExternalTrigEventEdge_OFF: Hardware trigger detection disabled (conversions can be launched by software)
  • ADC_ExternalTrigEventEdge_RisingEdge: Hardware trigger detection on the rising edge
  • ADC_ExternalTrigEventEdge_FallingEdge: Hardware trigger detection on the falling edge
  • ADC_ExternalTrigEventEdge_BothEdge: Hardware trigger detection on both the rising and falling edges
Return values
None

Definition at line 1288 of file stm32f30x_adc.c.

uint16_t ADC_GetConversionValue ( ADC_TypeDef ADCx)

Returns the last ADCx conversion result data for regular channel.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
TheData conversion value.
Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
Return values
TheData conversion value.

Definition at line 981 of file stm32f4xx_adc.c.

uint32_t ADC_GetDualModeConversionValue ( ADC_TypeDef ADCx)

Returns the last ADC1, ADC2, ADC3 and ADC4 regular conversions results data in the selected dual mode.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
Return values
TheData conversion value.
Note
In dual mode, the value returned by this function is as following Data[15:0] : these bits contain the regular data of the Master ADC. Data[31:16]: these bits contain the regular data of the Slave ADC.

Definition at line 1428 of file stm32f30x_adc.c.

uint32_t ADC_GetMultiModeConversionValue ( void  )

Returns the last ADC1, ADC2 and ADC3 regular conversions results data in the selected multi mode.

Parameters
None
Return values
TheData conversion value.
Note
In dual mode, the value returned by this function is as following Data[15:0] : these bits contain the regular data of ADC1. Data[31:16]: these bits contain the regular data of ADC2.
In triple mode, the value returned by this function is as following Data[15:0] : these bits contain alternatively the regular data of ADC1, ADC3 and ADC2. Data[31:16]: these bits contain alternatively the regular data of ADC2, ADC1 and ADC3.

Definition at line 1002 of file stm32f4xx_adc.c.

FlagStatus ADC_GetSoftwareStartConvStatus ( ADC_TypeDef ADCx)

Gets the selected ADC Software start regular conversion Status.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
Thenew state of ADC software start conversion (SET or RESET).

Definition at line 845 of file stm32f4xx_adc.c.

FlagStatus ADC_GetStartConversionStatus ( ADC_TypeDef ADCx)

Gets the selected ADC start conversion Status.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
Return values
Thenew state of ADC start conversion (SET or RESET).

Definition at line 1319 of file stm32f30x_adc.c.

void ADC_RegularChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint8_t  Rank,
uint8_t  ADC_SampleTime 
)

Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_0: ADC Channel0 selected
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
RankThe rank in the regular group sequencer. This parameter must be between 1 to 16.
ADC_SampleTimeThe sample time value to be set for the selected channel. This parameter can be one of the following values:
  • ADC_SampleTime_3Cycles: Sample time equal to 3 cycles
  • ADC_SampleTime_15Cycles: Sample time equal to 15 cycles
  • ADC_SampleTime_28Cycles: Sample time equal to 28 cycles
  • ADC_SampleTime_56Cycles: Sample time equal to 56 cycles
  • ADC_SampleTime_84Cycles: Sample time equal to 84 cycles
  • ADC_SampleTime_112Cycles: Sample time equal to 112 cycles
  • ADC_SampleTime_144Cycles: Sample time equal to 144 cycles
  • ADC_SampleTime_480Cycles: Sample time equal to 480 cycles
Return values
None
Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
RankThe rank in the regular group sequencer. This parameter must be between 1 to 16.
ADC_SampleTimeThe sample time value to be set for the selected channel. This parameter can be one of the following values:
  • ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
  • ADC_SampleTime_2Cycles5: Sample time equal to 2.5 cycles
  • ADC_SampleTime_4Cycles5: Sample time equal to 4.5 cycles
  • ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
  • ADC_SampleTime_19Cycles5: Sample time equal to 19.5 cycles
  • ADC_SampleTime_61Cycles5: Sample time equal to 61.5 cycles
  • ADC_SampleTime_181Cycles5: Sample time equal to 181.5 cycles
  • ADC_SampleTime_601Cycles5: Sample time equal to 601.5 cycles
Return values
None

Definition at line 711 of file stm32f4xx_adc.c.

void ADC_RegularChannelSequencerLengthConfig ( ADC_TypeDef ADCx,
uint8_t  SequencerLength 
)

Sets the ADC regular channel sequence lenght.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
SequenceLengthThe Regular sequence length. This parameter must be between 1 to 16. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1248 of file stm32f30x_adc.c.

void ADC_SetChannelOffset1 ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint16_t  Offset 
)

Set the ADC channels conversion value offset1.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Offsetthe offset value for the selected ADC Channel This parameter must be a 12bit value.
Return values
None

Definition at line 1476 of file stm32f30x_adc.c.

void ADC_SetChannelOffset2 ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint16_t  Offset 
)

Set the ADC channels conversion value offset2.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Offsetthe offset value for the selected ADC Channel This parameter must be a 12bit value.
Return values
None

Definition at line 1519 of file stm32f30x_adc.c.

void ADC_SetChannelOffset3 ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint16_t  Offset 
)

Set the ADC channels conversion value offset3.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Offsetthe offset value for the selected ADC Channel This parameter must be a 12bit value.
Return values
None

Definition at line 1562 of file stm32f30x_adc.c.

void ADC_SetChannelOffset4 ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint16_t  Offset 
)

Set the ADC channels conversion value offset4.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Offsetthe offset value for the selected ADC Channel This parameter must be a 12bit value.
Return values
None

Definition at line 1605 of file stm32f30x_adc.c.

void ADC_SoftwareStartConv ( ADC_TypeDef ADCx)

Enables the selected ADC software start conversion of the regular channels.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
None

Definition at line 831 of file stm32f4xx_adc.c.

void ADC_StartConversion ( ADC_TypeDef ADCx)

Enables or disables the selected ADC start conversion .

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
Return values
None

Definition at line 1305 of file stm32f30x_adc.c.

void ADC_StopConversion ( ADC_TypeDef ADCx)

Stops the selected ADC ongoing conversion.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
Return values
None

Definition at line 1344 of file stm32f30x_adc.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Fri Oct 9 2020 03:17:19