Functions

Analog Watchdog configuration functions. More...

Collaboration diagram for Analog Watchdog configuration functions:

Functions

void ADC_AnalogWatchdog1SingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
 Configures the analog watchdog 2 guarded single channel. More...
 
void ADC_AnalogWatchdog1ThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
 Configures the high and low thresholds of the analog watchdog1. More...
 
void ADC_AnalogWatchdog2SingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
 Configures the analog watchdog 2 guarded single channel. More...
 
void ADC_AnalogWatchdog2ThresholdsConfig (ADC_TypeDef *ADCx, uint8_t HighThreshold, uint8_t LowThreshold)
 Configures the high and low thresholds of the analog watchdog2. More...
 
void ADC_AnalogWatchdog3SingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
 Configures the analog watchdog 3 guarded single channel. More...
 
void ADC_AnalogWatchdog3ThresholdsConfig (ADC_TypeDef *ADCx, uint8_t HighThreshold, uint8_t LowThreshold)
 Configures the high and low thresholds of the analog watchdog3. More...
 
void ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)
 Enables or disables the analog watchdog on single/all regular or injected channels. More...
 
void ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
 Configures the analog watchdog guarded single channel. More...
 
void ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
 Configures the high and low thresholds of the analog watchdog. More...
 

Detailed Description

Analog Watchdog configuration functions.

 ===============================================================================
             ##### Analog Watchdog configuration functions #####
 ===============================================================================  
    [..] This section provides functions allowing to configure the Analog Watchdog
         (AWD) feature in the ADC.
  
    [..] A typical configuration Analog Watchdog is done following these steps :
      (#) the ADC guarded channel(s) is (are) selected using the 
          ADC_AnalogWatchdogSingleChannelConfig() function.
      (#) The Analog watchdog lower and higher threshold are configured using the  
          ADC_AnalogWatchdogThresholdsConfig() function.
      (#) The Analog watchdog is enabled and configured to enable the check, on one
          or more channels, using the  ADC_AnalogWatchdogCmd() function.
 ===============================================================================
                    ##### Analog Watchdog configuration functions #####
 ===============================================================================  

  [..] This section provides functions allowing to configure the 3 Analog Watchdogs 
       (AWDG1, AWDG2 and AWDG3) in the ADC.
  
  [..] A typical configuration Analog Watchdog is done following these steps :
   (#) The ADC guarded channel(s) is (are) selected using the functions: 
      (++) ADC_AnalogWatchdog1SingleChannelConfig().
      (++) ADC_AnalogWatchdog2SingleChannelConfig().
      (++) ADC_AnalogWatchdog3SingleChannelConfig().

   (#) The Analog watchdog lower and higher threshold are configured using the functions: 
      (++) ADC_AnalogWatchdog1ThresholdsConfig().
      (++) ADC_AnalogWatchdog2ThresholdsConfig().
      (++) ADC_AnalogWatchdog3ThresholdsConfig().

   (#) The Analog watchdog is enabled and configured to enable the check, on one
      or more channels, using the function:
      (++) ADC_AnalogWatchdogCmd().

Function Documentation

void ADC_AnalogWatchdog1SingleChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel 
)

Configures the analog watchdog 2 guarded single channel.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure for the analog watchdog. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Return values
None

Definition at line 808 of file stm32f30x_adc.c.

void ADC_AnalogWatchdog1ThresholdsConfig ( ADC_TypeDef ADCx,
uint16_t  HighThreshold,
uint16_t  LowThreshold 
)

Configures the high and low thresholds of the analog watchdog1.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
HighThresholdthe ADC analog watchdog High threshold value. This parameter must be a 12bit value.
LowThresholdthe ADC analog watchdog Low threshold value. This parameter must be a 12bit value.
Return values
None

Definition at line 719 of file stm32f30x_adc.c.

void ADC_AnalogWatchdog2SingleChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel 
)

Configures the analog watchdog 2 guarded single channel.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure for the analog watchdog. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Return values
None

Definition at line 849 of file stm32f30x_adc.c.

void ADC_AnalogWatchdog2ThresholdsConfig ( ADC_TypeDef ADCx,
uint8_t  HighThreshold,
uint8_t  LowThreshold 
)

Configures the high and low thresholds of the analog watchdog2.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
HighThresholdthe ADC analog watchdog High threshold value. This parameter must be a 8bit value.
LowThresholdthe ADC analog watchdog Low threshold value. This parameter must be a 8bit value.
Return values
None

Definition at line 744 of file stm32f30x_adc.c.

void ADC_AnalogWatchdog3SingleChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel 
)

Configures the analog watchdog 3 guarded single channel.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure for the analog watchdog. This parameter can be one of the following values:
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Return values
None

Definition at line 890 of file stm32f30x_adc.c.

void ADC_AnalogWatchdog3ThresholdsConfig ( ADC_TypeDef ADCx,
uint8_t  HighThreshold,
uint8_t  LowThreshold 
)

Configures the high and low thresholds of the analog watchdog3.

Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
HighThresholdthe ADC analog watchdog High threshold value. This parameter must be a 8bit value.
LowThresholdthe ADC analog watchdog Low threshold value. This parameter must be a 8bit value.
Return values
None

Definition at line 768 of file stm32f30x_adc.c.

void ADC_AnalogWatchdogCmd ( ADC_TypeDef ADCx,
uint32_t  ADC_AnalogWatchdog 
)

Enables or disables the analog watchdog on single/all regular or injected channels.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_AnalogWatchdogthe ADC analog watchdog configuration. This parameter can be one of the following values:
  • ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
  • ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
  • ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
  • ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
  • ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
  • ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
  • ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
Return values
None
Parameters
ADCxwhere x can be 1, 2, 3 or 4 to select the ADC peripheral.
ADC_AnalogWatchdogthe ADC analog watchdog configuration. This parameter can be one of the following values:
  • ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
  • ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
  • ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
  • ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
  • ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
  • ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
  • ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
Return values
None

Definition at line 455 of file stm32f4xx_adc.c.

void ADC_AnalogWatchdogSingleChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel 
)

Configures the analog watchdog guarded single channel.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure for the analog watchdog. This parameter can be one of the following values:
  • ADC_Channel_0: ADC Channel0 selected
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
  • ADC_Channel_18: ADC Channel18 selected
Return values
None

Definition at line 525 of file stm32f4xx_adc.c.

void ADC_AnalogWatchdogThresholdsConfig ( ADC_TypeDef ADCx,
uint16_t  HighThreshold,
uint16_t  LowThreshold 
)

Configures the high and low thresholds of the analog watchdog.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
HighThresholdthe ADC analog watchdog High threshold value. This parameter must be a 12-bit value.
LowThresholdthe ADC analog watchdog Low threshold value. This parameter must be a 12-bit value.
Return values
None

Definition at line 484 of file stm32f4xx_adc.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Fri Oct 9 2020 03:17:19