Go to the source code of this file.
Namespaces | |
| namespace | base_local_planner::cfg::BaseLocalPlannerConfig |
Variables | |
| int | base_local_planner::cfg::BaseLocalPlannerConfig::all_level = 0 |
| list | base_local_planner::cfg::BaseLocalPlannerConfig::config_description = [{'srcline': 16, 'description': 'The acceleration limit of the robot in the x direction', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'acc_lim_x', 'edit_method': '', 'default': 1.0, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 17, 'description': 'The acceleration limit of the robot in the y direction', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'acc_lim_y', 'edit_method': '', 'default': 1.0, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 18, 'description': 'The acceleration limit of the robot in the theta direction', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'acc_lim_theta', 'edit_method': '', 'default': 1.0, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 20, 'description': 'The maximum x velocity for the robot in m/s', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'max_vel_x', 'edit_method': '', 'default': 0.55000000000000004, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 21, 'description': 'The minimum x velocity for the robot in m/s', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'min_vel_x', 'edit_method': '', 'default': 0.0, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 23, 'description': 'The absolute value of the maximum rotational velocity for the robot in rad/s', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'max_vel_theta', 'edit_method': '', 'default': 1.0, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 24, 'description': 'The absolute value of the minimum rotational velocity for the robot in rad/s', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'min_vel_theta', 'edit_method': '', 'default': -1.0, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 25, 'description': 'The absolute value of the minimum in-place rotational velocity the controller will explore', 'max': 20.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'min_in_place_vel_theta', 'edit_method': '', 'default': 0.40000000000000002, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 27, 'description': 'The amount of time to roll trajectories out for in seconds', 'max': 10.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'sim_time', 'edit_method': '', 'default': 1.7, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 28, 'description': 'The granularity with which to check for collisions along each trajectory in meters', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'sim_granularity', 'edit_method': '', 'default': 0.025000000000000001, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 30, 'description': 'The weight for the path distance part of the cost function', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'pdist_scale', 'edit_method': '', 'default': 0.59999999999999998, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 31, 'description': 'The weight for the goal distance part of the cost function', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'gdist_scale', 'edit_method': '', 'default': 0.80000000000000004, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 32, 'description': 'The weight for the obstacle distance part of the cost function', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'occdist_scale', 'edit_method': '', 'default': 0.01, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 34, 'description': 'The distance the robot must travel before oscillation flags are reset, in meters', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'oscillation_reset_dist', 'edit_method': '', 'default': 0.050000000000000003, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 35, 'description': 'The distance the robot must travel before oscillation flags are reset, in meters', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'escape_reset_dist', 'edit_method': '', 'default': 0.10000000000000001, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 36, 'description': 'The distance the robot must travel before oscillation flags are reset, in meters', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'escape_reset_theta', 'edit_method': '', 'default': 1.5707963267948966, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 38, 'description': 'The number of samples to use when exploring the x velocity space', 'max': 300, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'vx_samples', 'edit_method': '', 'default': 20, 'level': 0, 'min': 1, 'type': 'int'}, {'srcline': 39, 'description': 'The number of samples to use when exploring the theta velocity space', 'max': 300, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'vtheta_samples', 'edit_method': '', 'default': 20, 'level': 0, 'min': 1, 'type': 'int'}, {'srcline': 41, 'description': 'How far the robot should look ahead of itself when differentiating between different rotational velocities', 'max': 5.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'heading_lookahead', 'edit_method': '', 'default': 0.32500000000000001, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 43, 'description': 'Set this to true if the robot being controlled can take y velocities and false otherwise', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'holonomic_robot', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 45, 'description': 'The velocity to use while backing up', 'max': 2.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'escape_vel', 'edit_method': '', 'default': -0.10000000000000001, 'level': 0, 'min': -2.0, 'type': 'double'}, {'srcline': 47, 'description': 'Set this to true to use the Dynamic Window Approach, false to use acceleration limits', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'dwa', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 49, 'description': 'Set this to true to use the Dynamic Window Approach, false to use acceleration limits', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'heading_scoring', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 50, 'description': 'How far to look ahead in time when we score heading based trajectories', 'max': 1.0, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'heading_scoring_timestep', 'edit_method': '', 'default': 0.10000000000000001, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 52, 'description': 'Set this to true to allow simple attraction to a goal point instead of intelligent cost propagation', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'simple_attractor', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 54, 'description': "The distance between simulation points for angular velocity should be small enough that the robot doesn't hit things", 'max': 1.5707963267948966, 'cconsttype': 'const double', 'ctype': 'double', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'angular_sim_granularity', 'edit_method': '', 'default': 0.025000000000000001, 'level': 0, 'min': 0.0, 'type': 'double'}, {'srcline': 56, 'description': 'A comma delimited list of the y velocities the controller will explore', 'max': '', 'cconsttype': 'const char * const', 'ctype': 'std::string', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'y_vels', 'edit_method': '', 'default': '-0.3,-0.1,0.1,-0.3', 'level': 0, 'min': '', 'type': 'str'}, {'srcline': 58, 'description': 'Retore to the default configuration', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/BaseLocalPlanner.cfg', 'name': 'restore_defaults', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}] |
| ********************************************************* | |
| dictionary | base_local_planner::cfg::BaseLocalPlannerConfig::defaults = {} |
| dictionary | base_local_planner::cfg::BaseLocalPlannerConfig::level = {} |
| dictionary | base_local_planner::cfg::BaseLocalPlannerConfig::max = {} |
| dictionary | base_local_planner::cfg::BaseLocalPlannerConfig::min = {} |
| dictionary | base_local_planner::cfg::BaseLocalPlannerConfig::type = {} |
