/opt/ros/diamondback/stacks/wg_robots_gazebo/pr2_bringup_gazebo_demo/include/pr2_bringup_gazebo_demo/wrist_transmission.h

Go to the documentation of this file.

/*********************************************************************
 * Software License Agreement (BSD License)
 *
 *  Copyright (c) 2008, Willow Garage, Inc.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.
 *   * Neither the name of the Willow Garage nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 *  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 *  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 *********************************************************************/
/*
 * Author: Melonee Wise

   example xml:
    <robot name="wrist_trans">
      <joint name="right_wrist_flex_joint" type="revolute">
        <limit min="-0.157" max="2.409" effort="5" velocity="5" />
        <axis xyz="0 0 1" />
      </joint>

      <joint name="right_wrist_roll_joint" type="continuous">
        <limit min="0.0" max="0.0" effort="5" velocity="5" />
        <axis xyz="0 0 1" />
      </joint>

      <transmission type="WristTransmissionCal" name="wrist_trans">
        <rightActuator name="right_wrist_r_motor"  mechanicalReduction="60.17"/>
        <leftActuator name="right_wrist_l_motor" mechanicalReduction="60.17"/>
        <flexJoint name="wrist_right_flex_joint" mechanicalReduction="1"/>
        <rollJoint name="wrist_right_roll_joint" mechanicalReduction="1"/>
      </transmission>
    </robot>
 */
#ifndef WRIST_TRANSMISSION_H
#define WRIST_TRANSMISSION_H

#include <tinyxml/tinyxml.h>
#include "pr2_mechanism_model/transmission.h"
#include "pr2_mechanism_model/joint.h"
#include "pr2_hardware_interface/hardware_interface.h"
#include "pr2_bringup_gazebo_demo/joint_calibration_simulator.h"

namespace pr2_bringup_gazebo_demo {

class WristTransmissionCal : public pr2_mechanism_model::Transmission
{
public:
  WristTransmissionCal() {}
  ~WristTransmissionCal() {}

  bool initXml(TiXmlElement *config, pr2_mechanism_model::Robot *robot);

  std::vector<double> actuator_reduction_;
  std::vector<double> joint_reduction_;

  // Describes the order of the actuators and the joints in the arrays
  // of names and of those passed to propagate*
  enum { RIGHT_MOTOR, LEFT_MOTOR };
  enum { FLEX_JOINT, ROLL_JOINT };

  void propagatePosition(std::vector<pr2_hardware_interface::Actuator*>&,
                         std::vector<pr2_mechanism_model::JointState*>&);
  void propagatePositionBackwards(std::vector<pr2_mechanism_model::JointState*>&,
                                  std::vector<pr2_hardware_interface::Actuator*>&);
  void propagateEffort(std::vector<pr2_mechanism_model::JointState*>&,
                       std::vector<pr2_hardware_interface::Actuator*>&);
  void propagateEffortBackwards(std::vector<pr2_hardware_interface::Actuator*>&,
                                std::vector<pr2_mechanism_model::JointState*>&);
  void setReductions(std::vector<double>& ar, std::vector<double>& jr);

private:
  JointCalibrationSimulator joint_calibration_simulator_[2];
};

} // namespace pr2_mechanism_model

#endif

---

pr2_bringup_gazebo_demo
Author(s): Wim Meeussen
autogenerated on Wed Aug 17 09:02:39 2011