Specifies the period value to be loaded into the active Auto-Reload Register at the next update event. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

Definition at line 55 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h.

◆ Prescaler

uint32_t TIM_Base_InitTypeDef::Prescaler

Specifies the prescaler value used to divide the TIM clock. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF

Definition at line 49 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h.

◆ RepetitionCounter

uint32_t TIM_Base_InitTypeDef::RepetitionCounter

Specifies the repetition counter value. Each time the RCR downcounter reaches zero, an update event is generated and counting restarts from the RCR value (N). This means in PWM mode that (N+1) corresponds to:

the number of PWM periods in edge-aligned mode
the number of half PWM period in center-aligned mode GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.

Definition at line 62 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h.

The documentation for this struct was generated from the following files:

Public Attributes

Detailed Description

Member Data Documentation

◆ AutoReloadPreload

◆ ClockDivision

◆ CounterMode

◆ Period

◆ Prescaler

◆ RepetitionCounter