picovoice_driver: otm8009a_reg.h File Reference

This file contains all the constants parameters for the OTM8009A. More...

#include <cmsis_compiler.h>

Include dependency graph for otm8009a_reg.h:

This graph shows which files directly or indirectly include this file:

Classes
struct	otm8009a_ctx_t

Macros
#define	OTM8009A_CMD_CASET 0x2A /* Column address set command */

#define	OTM8009A_CMD_COLMOD 0x3A /* Interface Pixel format command */

#define	OTM8009A_CMD_DISPOFF 0x28 /* Display Off command */

#define	OTM8009A_CMD_DISPON 0x29 /* Display On command */

#define	OTM8009A_CMD_ID1 0xDA /* Read ID1 command */

#define	OTM8009A_CMD_ID2 0xDB /* Read ID2 command */

#define	OTM8009A_CMD_ID3 0xDC /* Read ID3 command */

#define	OTM8009A_CMD_IDMOFF 0x38 /* Idle mode Off command */

#define	OTM8009A_CMD_IDMON 0x39 /* Idle mode On command */

#define	OTM8009A_CMD_MADCTR 0x36 /* Memory Access write control command */

#define	OTM8009A_CMD_NOP 0x00 /* NOP command */

#define	OTM8009A_CMD_PASET 0x2B /* Page address set command */

#define	OTM8009A_CMD_PLTAR 0x30 /* Partial area command (4 parameters) */

#define	OTM8009A_CMD_PTLON 0x12 /* Partial mode On command */

#define	OTM8009A_CMD_RAMRD 0x2E /* Memory (GRAM) read command */

#define	OTM8009A_CMD_RAMRDC 0x3E /* Memory read continue command */

#define	OTM8009A_CMD_RAMWR 0x2C /* Memory (GRAM) write command */

#define	OTM8009A_CMD_RAMWRC 0x3C /* Memory write continue command */

#define	OTM8009A_CMD_RDDCOLMOD 0x0C /* Read Display pixel format */

#define	OTM8009A_CMD_RDDMADCTL 0x0B /* Read Display MADCTR command : read memory display access ctrl */

#define	OTM8009A_CMD_RDSCNL 0x45 /* Read Tearing Effect Scan line command */

#define	OTM8009A_CMD_SLPIN 0x10 /* Sleep In command */

#define	OTM8009A_CMD_SLPOUT 0x11 /* Sleep Out command */

#define	OTM8009A_CMD_SWRESET 0x01 /* Sw reset command */

#define	OTM8009A_CMD_TEEON 0x35 /* Tearing Effect Line On command : command with 1 parameter 'TELOM' */

#define	OTM8009A_CMD_TEOFF 0x34 /* Tearing Effect Line Off command : command with no parameter */

#define	OTM8009A_CMD_WRCABC 0x55 /* Write Content Adaptive Brightness command */

#define	OTM8009A_CMD_WRCABCMB 0x5E /* Write CABC Minimum Brightness command */

#define	OTM8009A_CMD_WRCTRLD 0x53 /* Write CTRL Display command */

#define	OTM8009A_CMD_WRDISBV 0x51 /* Write Display Brightness command */

#define	OTM8009A_CMD_WRTESCN 0x44 /* Write Tearing Effect Scan line command */

#define	OTM8009A_COLMOD_RGB565 0x55

#define	OTM8009A_COLMOD_RGB888 0x77

#define	OTM8009A_MADCTR_MODE_LANDSCAPE 0x60 /* MY = 0, MX = 1, MV = 1, ML = 0, RGB = 0 */

#define	OTM8009A_MADCTR_MODE_PORTRAIT 0x00

#define	OTM8009A_TEEON_TELOM_VBLANKING_AND_HBLANKING_INFO 0x01

#define	OTM8009A_TEEON_TELOM_VBLANKING_INFO_ONLY 0x00

Typedefs
typedef int32_t(*	OTM8009A_Read_Func) (void , uint16_t, uint8_t , uint16_t)

typedef int32_t(*	OTM8009A_Write_Func) (void , uint16_t, uint8_t , uint16_t)

Functions
int32_t	otm8009a_read_reg (otm8009a_ctx_t ctx, uint16_t reg, uint8_t pdata, uint16_t length)

int32_t	otm8009a_write_reg (otm8009a_ctx_t ctx, uint16_t reg, const uint8_t pdata, uint16_t length)

Detailed Description

This file contains all the constants parameters for the OTM8009A.

Author: MCD Application Team

Attention

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file otm8009a_reg.h.

Classes

Macros

Typedefs

Functions

Detailed Description

© Copyright (c) 2019 STMicroelectronics. All rights reserved.