Macros
OTM8009A_Exported_Constants
Collaboration diagram for OTM8009A_Exported_Constants:

Macros

#define OTM8009A_CMD_CASET   0x2A /* Column address set command */
 
#define OTM8009A_CMD_COLMOD   0x3A /* Interface Pixel format command */
 
#define OTM8009A_CMD_DISPOFF   0x28 /* Display Off command */
 
#define OTM8009A_CMD_DISPON   0x29 /* Display On command */
 
#define OTM8009A_CMD_ID1   0xDA /* Read ID1 command */
 
#define OTM8009A_CMD_ID2   0xDB /* Read ID2 command */
 
#define OTM8009A_CMD_ID3   0xDC /* Read ID3 command */
 
#define OTM8009A_CMD_IDMOFF   0x38 /* Idle mode Off command */
 
#define OTM8009A_CMD_IDMON   0x39 /* Idle mode On command */
 
#define OTM8009A_CMD_MADCTR   0x36 /* Memory Access write control command */
 
#define OTM8009A_CMD_NOP   0x00 /* NOP command */
 
#define OTM8009A_CMD_PASET   0x2B /* Page address set command */
 
#define OTM8009A_CMD_PLTAR   0x30 /* Partial area command (4 parameters) */
 
#define OTM8009A_CMD_PTLON   0x12 /* Partial mode On command */
 
#define OTM8009A_CMD_RAMRD   0x2E /* Memory (GRAM) read command */
 
#define OTM8009A_CMD_RAMRDC   0x3E /* Memory read continue command */
 
#define OTM8009A_CMD_RAMWR   0x2C /* Memory (GRAM) write command */
 
#define OTM8009A_CMD_RAMWRC   0x3C /* Memory write continue command */
 
#define OTM8009A_CMD_RDDCOLMOD   0x0C /* Read Display pixel format */
 
#define OTM8009A_CMD_RDDMADCTL   0x0B /* Read Display MADCTR command : read memory display access ctrl */
 
#define OTM8009A_CMD_RDSCNL   0x45 /* Read Tearing Effect Scan line command */
 
#define OTM8009A_CMD_SLPIN   0x10 /* Sleep In command */
 
#define OTM8009A_CMD_SLPOUT   0x11 /* Sleep Out command */
 
#define OTM8009A_CMD_SWRESET   0x01 /* Sw reset command */
 
#define OTM8009A_CMD_TEEON   0x35 /* Tearing Effect Line On command : command with 1 parameter 'TELOM' */
 
#define OTM8009A_CMD_TEOFF   0x34 /* Tearing Effect Line Off command : command with no parameter */
 
#define OTM8009A_CMD_WRCABC   0x55 /* Write Content Adaptive Brightness command */
 
#define OTM8009A_CMD_WRCABCMB   0x5E /* Write CABC Minimum Brightness command */
 
#define OTM8009A_CMD_WRCTRLD   0x53 /* Write CTRL Display command */
 
#define OTM8009A_CMD_WRDISBV   0x51 /* Write Display Brightness command */
 
#define OTM8009A_CMD_WRTESCN   0x44 /* Write Tearing Effect Scan line command */
 
#define OTM8009A_COLMOD_RGB565   0x55
 
#define OTM8009A_COLMOD_RGB888   0x77
 
#define OTM8009A_MADCTR_MODE_LANDSCAPE   0x60 /* MY = 0, MX = 1, MV = 1, ML = 0, RGB = 0 */
 
#define OTM8009A_MADCTR_MODE_PORTRAIT   0x00
 
#define OTM8009A_TEEON_TELOM_VBLANKING_AND_HBLANKING_INFO   0x01
 
#define OTM8009A_TEEON_TELOM_VBLANKING_INFO_ONLY   0x00
 

Detailed Description

Macro Definition Documentation

◆ OTM8009A_CMD_CASET

#define OTM8009A_CMD_CASET   0x2A /* Column address set command */

Definition at line 63 of file otm8009a_reg.h.

◆ OTM8009A_CMD_COLMOD

#define OTM8009A_CMD_COLMOD   0x3A /* Interface Pixel format command */

Definition at line 88 of file otm8009a_reg.h.

◆ OTM8009A_CMD_DISPOFF

#define OTM8009A_CMD_DISPOFF   0x28 /* Display Off command */

Definition at line 60 of file otm8009a_reg.h.

◆ OTM8009A_CMD_DISPON

#define OTM8009A_CMD_DISPON   0x29 /* Display On command */

Definition at line 61 of file otm8009a_reg.h.

◆ OTM8009A_CMD_ID1

#define OTM8009A_CMD_ID1   0xDA /* Read ID1 command */

Definition at line 106 of file otm8009a_reg.h.

◆ OTM8009A_CMD_ID2

#define OTM8009A_CMD_ID2   0xDB /* Read ID2 command */

Definition at line 107 of file otm8009a_reg.h.

◆ OTM8009A_CMD_ID3

#define OTM8009A_CMD_ID3   0xDC /* Read ID3 command */

Definition at line 108 of file otm8009a_reg.h.

◆ OTM8009A_CMD_IDMOFF

#define OTM8009A_CMD_IDMOFF   0x38 /* Idle mode Off command */

Definition at line 85 of file otm8009a_reg.h.

◆ OTM8009A_CMD_IDMON

#define OTM8009A_CMD_IDMON   0x39 /* Idle mode On command */

Definition at line 86 of file otm8009a_reg.h.

◆ OTM8009A_CMD_MADCTR

#define OTM8009A_CMD_MADCTR   0x36 /* Memory Access write control command */

Definition at line 79 of file otm8009a_reg.h.

◆ OTM8009A_CMD_NOP

#define OTM8009A_CMD_NOP   0x00 /* NOP command */

Definition at line 52 of file otm8009a_reg.h.

◆ OTM8009A_CMD_PASET

#define OTM8009A_CMD_PASET   0x2B /* Page address set command */

Definition at line 64 of file otm8009a_reg.h.

◆ OTM8009A_CMD_PLTAR

#define OTM8009A_CMD_PLTAR   0x30 /* Partial area command (4 parameters) */

Definition at line 69 of file otm8009a_reg.h.

◆ OTM8009A_CMD_PTLON

#define OTM8009A_CMD_PTLON   0x12 /* Partial mode On command */

Definition at line 58 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RAMRD

#define OTM8009A_CMD_RAMRD   0x2E /* Memory (GRAM) read command */

Definition at line 67 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RAMRDC

#define OTM8009A_CMD_RAMRDC   0x3E /* Memory read continue command */

Definition at line 95 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RAMWR

#define OTM8009A_CMD_RAMWR   0x2C /* Memory (GRAM) write command */

Definition at line 66 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RAMWRC

#define OTM8009A_CMD_RAMWRC   0x3C /* Memory write continue command */

Definition at line 94 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RDDCOLMOD

#define OTM8009A_CMD_RDDCOLMOD   0x0C /* Read Display pixel format */

Definition at line 55 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RDDMADCTL

#define OTM8009A_CMD_RDDMADCTL   0x0B /* Read Display MADCTR command : read memory display access ctrl */

Definition at line 54 of file otm8009a_reg.h.

◆ OTM8009A_CMD_RDSCNL

#define OTM8009A_CMD_RDSCNL   0x45 /* Read Tearing Effect Scan line command */

Definition at line 98 of file otm8009a_reg.h.

◆ OTM8009A_CMD_SLPIN

#define OTM8009A_CMD_SLPIN   0x10 /* Sleep In command */

Definition at line 56 of file otm8009a_reg.h.

◆ OTM8009A_CMD_SLPOUT

#define OTM8009A_CMD_SLPOUT   0x11 /* Sleep Out command */

Definition at line 57 of file otm8009a_reg.h.

◆ OTM8009A_CMD_SWRESET

#define OTM8009A_CMD_SWRESET   0x01 /* Sw reset command */

Definition at line 53 of file otm8009a_reg.h.

◆ OTM8009A_CMD_TEEON

#define OTM8009A_CMD_TEEON   0x35 /* Tearing Effect Line On command : command with 1 parameter 'TELOM' */

Definition at line 73 of file otm8009a_reg.h.

◆ OTM8009A_CMD_TEOFF

#define OTM8009A_CMD_TEOFF   0x34 /* Tearing Effect Line Off command : command with no parameter */

Definition at line 71 of file otm8009a_reg.h.

◆ OTM8009A_CMD_WRCABC

#define OTM8009A_CMD_WRCABC   0x55 /* Write Content Adaptive Brightness command */

Definition at line 103 of file otm8009a_reg.h.

◆ OTM8009A_CMD_WRCABCMB

#define OTM8009A_CMD_WRCABCMB   0x5E /* Write CABC Minimum Brightness command */

Definition at line 104 of file otm8009a_reg.h.

◆ OTM8009A_CMD_WRCTRLD

#define OTM8009A_CMD_WRCTRLD   0x53 /* Write CTRL Display command */

Definition at line 102 of file otm8009a_reg.h.

◆ OTM8009A_CMD_WRDISBV

#define OTM8009A_CMD_WRDISBV   0x51 /* Write Display Brightness command */

Definition at line 101 of file otm8009a_reg.h.

◆ OTM8009A_CMD_WRTESCN

#define OTM8009A_CMD_WRTESCN   0x44 /* Write Tearing Effect Scan line command */

Definition at line 97 of file otm8009a_reg.h.

◆ OTM8009A_COLMOD_RGB565

#define OTM8009A_COLMOD_RGB565   0x55

Definition at line 91 of file otm8009a_reg.h.

◆ OTM8009A_COLMOD_RGB888

#define OTM8009A_COLMOD_RGB888   0x77

Definition at line 92 of file otm8009a_reg.h.

◆ OTM8009A_MADCTR_MODE_LANDSCAPE

#define OTM8009A_MADCTR_MODE_LANDSCAPE   0x60 /* MY = 0, MX = 1, MV = 1, ML = 0, RGB = 0 */

Definition at line 83 of file otm8009a_reg.h.

◆ OTM8009A_MADCTR_MODE_PORTRAIT

#define OTM8009A_MADCTR_MODE_PORTRAIT   0x00

Definition at line 82 of file otm8009a_reg.h.

◆ OTM8009A_TEEON_TELOM_VBLANKING_AND_HBLANKING_INFO

#define OTM8009A_TEEON_TELOM_VBLANKING_AND_HBLANKING_INFO   0x01

Definition at line 77 of file otm8009a_reg.h.

◆ OTM8009A_TEEON_TELOM_VBLANKING_INFO_ONLY

#define OTM8009A_TEEON_TELOM_VBLANKING_INFO_ONLY   0x00

Definition at line 76 of file otm8009a_reg.h.



picovoice_driver
Author(s):
autogenerated on Fri Apr 1 2022 02:15:09