Functions | |
void | BSP_SD_AbortCallback (void) |
BSP SD Abort callbacks. More... | |
uint8_t | BSP_SD_DeInit (void) |
DeInitializes the SD card device. More... | |
void | BSP_SD_Detect_MspInit (SD_HandleTypeDef *hsd, void *Params) |
Initializes the SD Detect pin MSP. More... | |
uint8_t | BSP_SD_Erase (uint32_t StartAddr, uint32_t EndAddr) |
Erases the specified memory area of the given SD card. More... | |
void | BSP_SD_GetCardInfo (HAL_SD_CardInfoTypeDef *CardInfo) |
Get SD information about specific SD card. More... | |
uint8_t | BSP_SD_GetCardState (void) |
Gets the current SD card data status. More... | |
uint8_t | BSP_SD_Init (void) |
Initializes the SD card device. More... | |
uint8_t | BSP_SD_IsDetected (void) |
Detects if SD card is correctly plugged in the memory slot or not. More... | |
uint8_t | BSP_SD_ITConfig (void) |
Configures Interrupt mode for SD detection pin. More... | |
void | BSP_SD_MspDeInit (SD_HandleTypeDef *hsd, void *Params) |
DeInitializes the SD MSP. More... | |
void | BSP_SD_MspInit (SD_HandleTypeDef *hsd, void *Params) |
Initializes the SD MSP. More... | |
uint8_t | BSP_SD_ReadBlocks (uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout) |
Reads block(s) from a specified address in an SD card, in polling mode. More... | |
uint8_t | BSP_SD_ReadBlocks_DMA (uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks) |
Reads block(s) from a specified address in an SD card, in DMA mode. More... | |
void | BSP_SD_ReadCpltCallback (void) |
BSP Rx Transfer completed callbacks. More... | |
uint8_t | BSP_SD_WriteBlocks (uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout) |
Writes block(s) to a specified address in an SD card, in polling mode. More... | |
uint8_t | BSP_SD_WriteBlocks_DMA (uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks) |
Writes block(s) to a specified address in an SD card, in DMA mode. More... | |
void | BSP_SD_WriteCpltCallback (void) |
BSP Tx Transfer completed callbacks. More... | |
void BSP_SD_AbortCallback | ( | void | ) |
BSP SD Abort callbacks.
None |
Definition at line 572 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_DeInit | ( | void | ) |
DeInitializes the SD card device.
SD | status |
Definition at line 199 of file stm32f769i_discovery_sd.c.
void BSP_SD_Detect_MspInit | ( | SD_HandleTypeDef * | hsd, |
void * | Params | ||
) |
Initializes the SD Detect pin MSP.
hsd | SD handle |
Params | : pointer on additional configuration parameters, can be NULL. |
None |
Definition at line 465 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_Erase | ( | uint32_t | StartAddr, |
uint32_t | EndAddr | ||
) |
Erases the specified memory area of the given SD card.
StartAddr | Start byte address |
EndAddr | End byte address |
SD | status |
Definition at line 343 of file stm32f769i_discovery_sd.c.
void BSP_SD_GetCardInfo | ( | HAL_SD_CardInfoTypeDef * | CardInfo | ) |
Get SD information about specific SD card.
CardInfo | Pointer to HAL_SD_CardInfoTypedef structure |
None |
Definition at line 532 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_GetCardState | ( | void | ) |
Gets the current SD card data status.
Data | transfer state. This value can be one of the following values:
|
Definition at line 521 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_Init | ( | void | ) |
Initializes the SD card device.
SD | status |
Definition at line 148 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_IsDetected | ( | void | ) |
Detects if SD card is correctly plugged in the memory slot or not.
Returns | if SD is detected or not |
Definition at line 244 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_ITConfig | ( | void | ) |
Configures Interrupt mode for SD detection pin.
Returns | 0 |
Definition at line 222 of file stm32f769i_discovery_sd.c.
void BSP_SD_MspDeInit | ( | SD_HandleTypeDef * | hsd, |
void * | Params | ||
) |
DeInitializes the SD MSP.
hsd | SD handle |
Params | : pointer on additional configuration parameters, can be NULL. |
Definition at line 484 of file stm32f769i_discovery_sd.c.
void BSP_SD_MspInit | ( | SD_HandleTypeDef * | hsd, |
void * | Params | ||
) |
Initializes the SD MSP.
hsd | SD handle |
Params | : pointer on additional configuration parameters, can be NULL. |
Definition at line 360 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_ReadBlocks | ( | uint32_t * | pData, |
uint32_t | ReadAddr, | ||
uint32_t | NumOfBlocks, | ||
uint32_t | Timeout | ||
) |
Reads block(s) from a specified address in an SD card, in polling mode.
pData | Pointer to the buffer that will contain the data to transmit |
ReadAddr | Address from where data is to be read |
NumOfBlocks | Number of SD blocks to read |
Timeout | Timeout for read operation |
SD | status |
Definition at line 265 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_ReadBlocks_DMA | ( | uint32_t * | pData, |
uint32_t | ReadAddr, | ||
uint32_t | NumOfBlocks | ||
) |
Reads block(s) from a specified address in an SD card, in DMA mode.
pData | Pointer to the buffer that will contain the data to transmit |
ReadAddr | Address from where data is to be read |
NumOfBlocks | Number of SD blocks to read |
SD | status |
Definition at line 304 of file stm32f769i_discovery_sd.c.
void BSP_SD_ReadCpltCallback | ( | void | ) |
BSP Rx Transfer completed callbacks.
None |
Definition at line 590 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_WriteBlocks | ( | uint32_t * | pData, |
uint32_t | WriteAddr, | ||
uint32_t | NumOfBlocks, | ||
uint32_t | Timeout | ||
) |
Writes block(s) to a specified address in an SD card, in polling mode.
pData | Pointer to the buffer that will contain the data to transmit |
WriteAddr | Address from where data is to be written |
NumOfBlocks | Number of SD blocks to write |
Timeout | Timeout for write operation |
SD | status |
Definition at line 285 of file stm32f769i_discovery_sd.c.
uint8_t BSP_SD_WriteBlocks_DMA | ( | uint32_t * | pData, |
uint32_t | WriteAddr, | ||
uint32_t | NumOfBlocks | ||
) |
Writes block(s) to a specified address in an SD card, in DMA mode.
pData | Pointer to the buffer that will contain the data to transmit |
WriteAddr | Address from where data is to be written |
NumOfBlocks | Number of SD blocks to write |
SD | status |
Definition at line 324 of file stm32f769i_discovery_sd.c.
void BSP_SD_WriteCpltCallback | ( | void | ) |
BSP Tx Transfer completed callbacks.
None |
Definition at line 581 of file stm32f769i_discovery_sd.c.