Macros
RCC Extended MCOx Clock Config
STM32F4xx_HAL_Driver | STM32F7xx_HAL_Driver | STM32H7xx_HAL_Driver » RCC » RCC Exported Macros


More...

Collaboration diagram for RCC Extended MCOx Clock Config:

Macros

#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
 Macro to configure the MCO1 clock. More...
 
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
 Macro to configure the MCO1 clock. More...
 
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
 Macro to configure the MCO1 clock. More...
 
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
 Macro to configure the MCO1 clock. More...
 
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
 Macro to configure the MCO1 clock. More...
 
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
 Macro to configure the MCO1 clock. More...
 
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3)));
 Macro to configure the MCO2 clock. More...
 
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
 Macro to configure the MCO2 clock. More...
 
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
 Macro to configure the MCO2 clock. More...
 
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
 Macro to configure the MCO2 clock. More...
 
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7)));
 Macro to configure the MCO2 clock. More...
 
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__)   MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7)));
 Macro to configure the MCO2 clock. More...
 

Detailed Description


Macro Definition Documentation

◆ __HAL_RCC_MCO1_CONFIG [1/6]

#define __HAL_RCC_MCO1_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))

Macro to configure the MCO1 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
  • RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock

Definition at line 1007 of file stm32f7xx_hal_rcc.h.

◆ __HAL_RCC_MCO1_CONFIG [2/6]

#define __HAL_RCC_MCO1_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))

Macro to configure the MCO1 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
  • RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock

Definition at line 1120 of file stm32f469/stm32f469i-disco/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h.

◆ __HAL_RCC_MCO1_CONFIG [3/6]

#define __HAL_RCC_MCO1_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))

Macro to configure the MCO1 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
  • RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock

Definition at line 1120 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h.

◆ __HAL_RCC_MCO1_CONFIG [4/6]

#define __HAL_RCC_MCO1_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))

Macro to configure the MCO1 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
  • RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock

Definition at line 1120 of file stm32f411/stm32f411e-disco/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h.

◆ __HAL_RCC_MCO1_CONFIG [5/6]

#define __HAL_RCC_MCO1_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))

Macro to configure the MCO1 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
  • RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_PLL1QCLK: PLL1Q clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSI48: HSI48 (48MHZ) selected as MCO1 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO1 clock

Definition at line 7704 of file stm32h747/stm32h747i-disco/CM7/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h.

◆ __HAL_RCC_MCO1_CONFIG [6/6]

#define __HAL_RCC_MCO1_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))

Macro to configure the MCO1 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
  • RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
  • RCC_MCO1SOURCE_PLL1QCLK: PLL1Q clock selected as MCO1 source
  • RCC_MCO1SOURCE_HSI48: HSI48 (48MHZ) selected as MCO1 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO1 clock

Definition at line 7707 of file stm32h735/stm32h735g-dk/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h.

◆ __HAL_RCC_MCO2_CONFIG [1/6]

#define __HAL_RCC_MCO2_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3)));

Macro to configure the MCO2 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
  • RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
  • RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
  • RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock

Definition at line 1026 of file stm32f7xx_hal_rcc.h.

◆ __HAL_RCC_MCO2_CONFIG [2/6]

#define __HAL_RCC_MCO2_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));

Macro to configure the MCO2 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
  • RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
  • RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
  • RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
  • RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock
Note
For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).

Definition at line 1141 of file stm32f411/stm32f411e-disco/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h.

◆ __HAL_RCC_MCO2_CONFIG [3/6]

#define __HAL_RCC_MCO2_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));

Macro to configure the MCO2 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
  • RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
  • RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
  • RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
  • RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock
Note
For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).

Definition at line 1141 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h.

◆ __HAL_RCC_MCO2_CONFIG [4/6]

#define __HAL_RCC_MCO2_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));

Macro to configure the MCO2 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
  • RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source, available for all STM32F4 devices except STM32F410xx
  • RCC_MCO2SOURCE_I2SCLK: I2SCLK clock selected as MCO2 source, available only for STM32F410Rx devices
  • RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
  • RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1: no division applied to MCOx clock
  • RCC_MCODIV_2: division by 2 applied to MCOx clock
  • RCC_MCODIV_3: division by 3 applied to MCOx clock
  • RCC_MCODIV_4: division by 4 applied to MCOx clock
  • RCC_MCODIV_5: division by 5 applied to MCOx clock
Note
For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).

Definition at line 1141 of file stm32f469/stm32f469i-disco/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h.

◆ __HAL_RCC_MCO2_CONFIG [5/6]

#define __HAL_RCC_MCO2_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7)));

Macro to configure the MCO2 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
  • RCC_MCO2SOURCE_PLL2PCLK: PLL2P clock selected as MCO2 source
  • RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
  • RCC_MCO2SOURCE_PLLCLK: PLL1P clock selected as MCO2 source
  • RCC_MCO2SOURCE_CSICLK: CSI clock selected as MCO2 source
  • RCC_MCO2SOURCE_LSICLK: LSI clock selected as MCO2 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO2 clock

Definition at line 7720 of file stm32h747/stm32h747i-disco/CM7/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h.

◆ __HAL_RCC_MCO2_CONFIG [6/6]

#define __HAL_RCC_MCO2_CONFIG (   __MCOCLKSOURCE__,
  __MCODIV__ 
)    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7)));

Macro to configure the MCO2 clock.

Parameters
<strong>MCOCLKSOURCE</strong>specifies the MCO clock source. This parameter can be one of the following values:
  • RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
  • RCC_MCO2SOURCE_PLL2PCLK: PLL2P clock selected as MCO2 source
  • RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
  • RCC_MCO2SOURCE_PLLCLK: PLL1P clock selected as MCO2 source
  • RCC_MCO2SOURCE_CSICLK: CSI clock selected as MCO2 source
  • RCC_MCO2SOURCE_LSICLK: LSI clock selected as MCO2 source
<strong>MCODIV</strong>specifies the MCO clock prescaler. This parameter can be one of the following values:
  • RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO2 clock

Definition at line 7723 of file stm32h735/stm32h735g-dk/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h.


picovoice_driver
Author(s):
autogenerated on Fri Apr 1 2022 02:15:07