Functions | |
def | _find_min_max_delta (from_angle, left_limit, right_limit) |
static bool | find_min_max_delta (double from, double left_limit, double right_limit, double &result_min_delta, double &result_max_delta) |
This function is only intended for internal use and not intended for external use. If you do use it, read the documentation very carefully. Returns the min and max amount (in radians) that can be moved from "from" angle to "left_limit" and "right_limit". More... | |
static double | from_degrees (double degrees) |
Convert degrees to radians. More... | |
def | normalize_angle (angle) |
static double | normalize_angle (double angle) |
normalize More... | |
def | normalize_angle_positive (angle) |
static double | normalize_angle_positive (double angle) |
normalize_angle_positive More... | |
static double | shortest_angular_distance (double from, double to) |
shortest_angular_distance More... | |
def | shortest_angular_distance (from_angle, to_angle) |
static bool | shortest_angular_distance_with_large_limits (double from, double to, double left_limit, double right_limit, double &shortest_angle) |
Returns the delta from from_angle to to_angle , making sure it does not violate limits specified by left_limit and right_limit . This function is similar to shortest_angular_distance_with_limits() , with the main difference that it accepts limits outside the [-M_PI, M_PI] range. Even if this is quite uncommon, one could indeed consider revolute joints with large rotation limits, e.g., in the range [-2*M_PI, 2*M_PI] . More... | |
def | shortest_angular_distance_with_large_limits (from_angle, to_angle, left_limit, right_limit) |
static bool | shortest_angular_distance_with_limits (double from, double to, double left_limit, double right_limit, double &shortest_angle) |
Returns the delta from "from_angle" to "to_angle" making sure it does not violate limits specified by left_limit and right_limit. The valid interval of angular positions is [left_limit,right_limit]. E.g., [-0.25,0.25] is a 0.5 radians wide interval that contains 0. But [0.25,-0.25] is a 2*M_PI-0.5 wide interval that contains M_PI (but not 0). The value of shortest_angle is the angular difference between "from" and "to" that lies within the defined valid interval. E.g. shortest_angular_distance_with_limits(-0.5,0.5,0.25,-0.25,ss) evaluates ss to 2*M_PI-1.0 and returns true while shortest_angular_distance_with_limits(-0.5,0.5,-0.25,0.25,ss) returns false since -0.5 and 0.5 do not lie in the interval [-0.25,0.25]. More... | |
def | shortest_angular_distance_with_limits (from_angle, to_angle, left_limit, right_limit) |
static double | to_degrees (double radians) |
Convert radians to degrees. More... | |
def | two_pi_complement (angle) |
static double | two_pi_complement (double angle) |
returns the angle in [-2*M_PI, 2*M_PI] going the other way along the unit circle. More... | |
|
private |
This function is only intended for internal use and not intended for external use. If you do use it, read the documentation very carefully. Returns the min and max amount (in radians) that can be moved from "from" angle to "left_limit" and "right_limit". \param from - "from" angle - must lie in [-pi, pi) \param left_limit - left limit of valid interval for angular position - must lie in [-pi, pi], left and right limits are specified on the unit circle w.r.t to a reference pointing inwards \param right_limit - right limit of valid interval for angular position - must lie in [-pi, pi], left and right limits are specified on the unit circle w.r.t to a reference pointing inwards \return (valid, min, max) - angle in radians that can be moved from "from" position before hitting the joint stop valid is False if "from" angle does not lie in the interval [left_limit,right_limit]
Definition at line 75 of file __init__.py.
|
static |
This function is only intended for internal use and not intended for external use. If you do use it, read the documentation very carefully. Returns the min and max amount (in radians) that can be moved from "from" angle to "left_limit" and "right_limit".
\function
from | - "from" angle - must lie in [-M_PI, M_PI) |
left_limit | - left limit of valid interval for angular position - must lie in [-M_PI, M_PI], left and right limits are specified on the unit circle w.r.t to a reference pointing inwards |
right_limit | - right limit of valid interval for angular position - must lie in [-M_PI, M_PI], left and right limits are specified on the unit circle w.r.t to a reference pointing inwards |
result_min_delta | - minimum (delta) angle (in radians) that can be moved from "from" position before hitting the joint stop |
result_max_delta | - maximum (delta) angle (in radians) that can be movedd from "from" position before hitting the joint stop |
|
inlinestatic |
def angles.normalize_angle | ( | angle | ) |
Normalizes the angle to be -pi to +pi It takes and returns radians.
Definition at line 42 of file __init__.py.
|
inlinestatic |
def angles.normalize_angle_positive | ( | angle | ) |
Normalizes the angle to be 0 to 2*pi It takes and returns radians.
Definition at line 37 of file __init__.py.
|
inlinestatic |
|
inlinestatic |
shortest_angular_distance
\function Given 2 angles, this returns the shortest angular difference. The inputs and ouputs are of course radians.
The result would always be -pi <= result <= pi. Adding the result to "from" will always get you an equivelent angle to "to".
def angles.shortest_angular_distance | ( | from_angle, | |
to_angle | |||
) |
Given 2 angles, this returns the shortest angular difference. The inputs and ouputs are of course radians. The result would always be -pi <= result <= pi. Adding the result to "from" will always get you an equivelent angle to "to".
Definition at line 50 of file __init__.py.
|
inlinestatic |
Returns the delta from from_angle
to to_angle
, making sure it does not violate limits specified by left_limit
and right_limit
. This function is similar to shortest_angular_distance_with_limits()
, with the main difference that it accepts limits outside the [-M_PI, M_PI]
range. Even if this is quite uncommon, one could indeed consider revolute joints with large rotation limits, e.g., in the range [-2*M_PI, 2*M_PI]
.
\function
In this case, a strict requirement is to have left_limit
smaller than right_limit
. Note also that from
must lie inside the valid range, while to
does not need to. In fact, this function will evaluate the shortest (valid) angle shortest_angle
so that from+shortest_angle
equals to
up to an integer multiple of 2*M_PI
. As an example, a call to shortest_angular_distance_with_large_limits(0, 10.5*M_PI, -2*M_PI, 2*M_PI, shortest_angle)
will return true
, with shortest_angle=0.5*M_PI
. This is because from
and from+shortest_angle
are both inside the limits, and fmod(to+shortest_angle, 2*M_PI)
equals fmod(to, 2*M_PI)
. On the other hand, shortest_angular_distance_with_large_limits(10.5*M_PI, 0, -2*M_PI, 2*M_PI, shortest_angle)
will return false, since from
is not in the valid range. Finally, note that the call shortest_angular_distance_with_large_limits(0, 10.5*M_PI, -2*M_PI, 0.1*M_PI, shortest_angle)
will also return true
. However, shortest_angle
in this case will be -1.5*M_PI
.
left_limit < right_limit
and if "from" and "from+shortest_angle" positions are within the valid interval, false otherwise. from | - "from" angle. |
to | - "to" angle. |
left_limit | - left limit of valid interval, must be smaller than right_limit. |
right_limit | - right limit of valid interval, must be greater than left_limit. |
shortest_angle | - result of the shortest angle calculation. |
def angles.shortest_angular_distance_with_large_limits | ( | from_angle, | |
to_angle, | |||
left_limit, | |||
right_limit | |||
) |
Returns the delta from `from_angle` to `to_angle`, making sure it does not violate limits specified by `left_limit` and `right_limit`. This function is similar to `shortest_angular_distance_with_limits()`, with the main difference that it accepts limits outside the `[-M_PI, M_PI]` range. Even if this is quite uncommon, one could indeed consider revolute joints with large rotation limits, e.g., in the range `[-2*M_PI, 2*M_PI]`. In this case, a strict requirement is to have `left_limit` smaller than `right_limit`. Note also that `from_angle` must lie inside the valid range, while `to_angle` does not need to. In fact, this function will evaluate the shortest (valid) angle `shortest_angle` so that `from_angle+shortest_angle` equals `to_angle` up to an integer multiple of `2*M_PI`. As an example, a call to `shortest_angular_distance_with_large_limits(0, 10.5*M_PI, -2*M_PI, 2*M_PI)` will return `true`, with `shortest_angle=0.5*M_PI`. This is because `from_angle` and `from_angle+shortest_angle` are both inside the limits, and `fmod(to_angle+shortest_angle, 2*M_PI)` equals `fmod(to_angle, 2*M_PI)`. On the other hand, `shortest_angular_distance_with_large_limits(10.5*M_PI, 0, -2*M_PI, 2*M_PI)` will return false, since `from_angle` is not in the valid range. Finally, note that the call `shortest_angular_distance_with_large_limits(0, 10.5*M_PI, -2*M_PI, 0.1*M_PI)` will also return `true`. However, `shortest_angle` in this case will be `-1.5*M_PI`. \return valid_flag, shortest_angle - valid_flag will be true if `left_limit < right_limit` and if "from_angle" and "from_angle+shortest_angle" positions are within the valid interval, false otherwise. \param left_limit - left limit of valid interval, must be smaller than right_limit. \param right_limit - right limit of valid interval, must be greater than left_limit.
Definition at line 180 of file __init__.py.
|
inlinestatic |
Returns the delta from "from_angle" to "to_angle" making sure it does not violate limits specified by left_limit and right_limit. The valid interval of angular positions is [left_limit,right_limit]. E.g., [-0.25,0.25] is a 0.5 radians wide interval that contains 0. But [0.25,-0.25] is a 2*M_PI-0.5 wide interval that contains M_PI (but not 0). The value of shortest_angle is the angular difference between "from" and "to" that lies within the defined valid interval. E.g. shortest_angular_distance_with_limits(-0.5,0.5,0.25,-0.25,ss) evaluates ss to 2*M_PI-1.0 and returns true while shortest_angular_distance_with_limits(-0.5,0.5,-0.25,0.25,ss) returns false since -0.5 and 0.5 do not lie in the interval [-0.25,0.25].
\function
from | - "from" angle |
to | - "to" angle |
left_limit | - left limit of valid interval for angular position, left and right limits are specified on the unit circle w.r.t to a reference pointing inwards |
right_limit | - right limit of valid interval for angular position, left and right limits are specified on the unit circle w.r.t to a reference pointing inwards |
shortest_angle | - result of the shortest angle calculation |
def angles.shortest_angular_distance_with_limits | ( | from_angle, | |
to_angle, | |||
left_limit, | |||
right_limit | |||
) |
Returns the delta from "from_angle" to "to_angle" making sure it does not violate limits specified by left_limit and right_limit. The valid interval of angular positions is [left_limit,right_limit]. E.g., [-0.25,0.25] is a 0.5 radians wide interval that contains 0. But [0.25,-0.25] is a 2*pi-0.5 wide interval that contains pi (but not 0). The value of shortest_angle is the angular difference between "from" and "to" that lies within the defined valid interval. E.g. shortest_angular_distance_with_limits(-0.5,0.5,0.25,-0.25) returns 2*pi-1.0 shortest_angular_distance_with_limits(-0.5,0.5,-0.25,0.25) returns None since -0.5 and 0.5 do not lie in the interval [-0.25,0.25] \param left_limit - left limit of valid interval for angular position - must lie in [-pi, pi], left and right limits are specified on the unit circle w.r.t to a reference pointing inwards \param right_limit - right limit of valid interval for angular position - must lie in [-pi, pi], left and right limits are specified on the unit circle w.r.t to a reference pointing inwards \returns valid_flag, shortest_angle
Definition at line 124 of file __init__.py.
|
inlinestatic |
def angles.two_pi_complement | ( | angle | ) |
returns the angle in [-2*pi, 2*pi] going the other way along the unit circle. \param angle The angle to which you want to turn in the range [-2*pi, 2*pi] E.g. two_pi_complement(-pi/4) returns 7_pi/4 two_pi_complement(pi/4) returns -7*pi/4
Definition at line 59 of file __init__.py.
|
inlinestatic |
returns the angle in [-2*M_PI, 2*M_PI] going the other way along the unit circle.
\function
angle | The angle to which you want to turn in the range [-2*M_PI, 2*M_PI] E.g. two_pi_complement(-M_PI/4) returns 7_M_PI/4 two_pi_complement(M_PI/4) returns -7*M_PI/4 |