CHANGELOG
Changelog for package ur_description
2.1.8 (2024-10-28)
Add analog_output_domain_cmd command interface (baclport of #219)
Add a sensor for the TCP pose (backport of #197)
Add missing state interfaces for get_version service (backport of #216)
Ur3 infinite wrist (backport of #196)
Update dynamic properties (backport of #195)
Contributors: mergify[bot], Felix Exner, Rune Søe-Knudsen
2.1.7 (2024-09-10)
Fix masses of robot links (backport of #187)
Contributors: Felix Exner
2.1.6 (2024-08-09)
2.1.5 (2024-04-25)
2.1.4 (2024-04-04)
2.1.3 (2023-12-18)
Make ros2_control tag generation optional in macro (#121)
Contributors: Felix Exner (fexner)
2.1.2 (2023-11-17)
2.1.1 (2023-09-08)
Update the joint limits for UR20 (#99)
UR20 description and meshes (#94) The UR20 meshes are added under Universal Robots A/S’ Terms and Conditions for Use of Graphical Documentation Co-authored-by: Rune Søe-Knudsen <41109954+urrsk@users.noreply.github.com>
Revert “Switch fake to mock for ros2_control updates (#77)”
Switch fake to mock for ros2_control updates (#77)
CI: Add iron workflow (#64)
Contributors: Felix Exner, Sebastian Castro, Rune Søe-Knudsen
2.1.0 (2023-06-01)
added missing handback interface - ros2control mock interface won’t work otherwise (#68) Co-authored-by: Lennart Nachtigall <lennart.nachtigall@sci-mo.de>
remove ticks from tf_prefix (#60) Co-authored-by: Lennart Nachtigall <lennart.nachtigall@sci-mo.de>
Replace duplicated
prefixparameter withtf_prefixWhitespace fixes
Update pre-commit workflows to current versions
This commits adds additional configuration fields which are needed for multiarm support: (#47) - Added trajectory_port - Port needed for the trajectory sending interface - Added non_blocking_read - Takes control of the update rate from ur interface by immediately returning from the read method - Added keep_alive_count field - Configures the amount of allowed reading timeouts on the robot side Additionally it adds the ${prefix} argument for the gpios and the force torque sensor in the ur.ros2_control.xacro file Co-authored-by: Lennart Nachtigall <firesurfer@firesurfer.de>
Set the default tool voltage in the description to 0 (#41) I am not sure whether this will actually affect something, as I don’t think we actually set the value initially, but it still makes sense to keep the default tool voltage at 0 to emphasize that by default, this will not be set higher.
Run prerelease tests on current distros (#44)
Contributors: Felix Exner, Felix Exner (fexner), Lennart Nachtigall
2.0.1 (2022-11-08)
Add tool voltage and zero ft sensor to command interface (#38) Added reverse ip and script command interface port as parameters
use xacro.load_yaml in favor of deprecated version (#43) Co-authored-by: aditya <aditya@nimble.ai>
Use mock_components instead of fake_components (#37) This has been renamed in ros2_control hardware_interface.
Prepare for branching out galactic (#39) * Add Humble to README and workflows * Use galactic branch for galactic stuff
Contributors: Abishalini Sivaraman, Aditya Agarwal, Felix Exner, Mads Holm Peters
2.0.0 (2022-03-17)
Migrated the description to ROS2
Added support for Gazebo and Ignition
Added ROS2_control definitions
Contributors: AndyZe, Denis Stogl, Denis Štogl, Felix Exner, John Morris, Jorge Nicho, Lovro, Lukas Sackewitz, Marvin Große Besselmann, Robert Wilbrandt, Tirine, Vatan Aksoy Tezer, livanov93, urmahp
1.2.7 (2019-11-23)
1.2.6 (2019-11-19)
Add optional safety_controller tags to all joints in xacro macros (#437)
Migrated all package.xml files to format=2 (#439)
Corrected dimensions and positions of inertias (#426)
Add description view launch files for all descriptions to easily check them (#435)
Contributors: Felix Mauch, JeremyZoss, Miguel Prada, Qiang Qiu, gavanderhoorn
1.2.5 (2019-04-05)
Add transmission_hw_interface to UR xacro and expose everywhere (#392)
Update maintainer listing: add Miguel (#410)
Updated xacro namespace.
Update maintainer and author information.
Updated mesh ambience so the model isn’t so dark in Gazebo
Fix overlapping variable names between robot definition files (#356)
Improve meshes shading (#233)
Added run_depend for xacro
Using the ‘doc’ attribute on ‘arg’ elements.
Enable self collision in gazebo
Contributors: Dave Niewinski, Felix von Drigalski, Harsh Deshpande, Joe, Marcel Schnirring, Miguel Prada, MonteroJJ, ipa-fxm
1.2.1 (2018-01-06)
Merge pull request #329 from tecnalia-medical-robotics/joint_limits Homogenize xacro macro arguments.
Merge pull request #332 from davetcoleman/kinetic_hw_iface_warning Remove UR3 ROS Control Hardware Interface warning
Remove UR3 ROS Control Hardware Interface warning
Extend changes to ‘_robot.urdf.xacro’ variants as well.
Homogenize xacro macro arguments. Joint limits for the limited version could be set using arguments for the UR10 but not for the UR3 and UR5. Same lower and upper limit arguments are added to the UR3 and UR5 xacro macros.
Fix elbow joint limits (#268)
Remove warning ‘redefining global property: pi’ (Jade+) (#315)
Contributors: Beatriz Leon, Dave Coleman, Felix Messmer, Miguel Prada
1.2.0 (2017-08-04)
1.1.9 (2017-01-02)
reintroduce ‘pi’, unbrake dependent xacros.
use ‘–inorder’ to trigger use of jade+ xacro on Indigo.
Contributors: gavanderhoorn
1.1.8 (2016-12-30)
all: update maintainers.
Contributors: gavanderhoorn
1.1.7 (2016-12-29)
Fix xacro warnings in Jade (#251)
added default values to xacro macro
tested joint limits modification
Contributors: Dave Coleman, G.A. vd. Hoorn, philip 14.04
1.1.6 (2016-04-01)
unify mesh names
add color to avoid default color ‘red’ for collision meshes
use correct DH parameter + colored meshes
introducing urdf for ur3 - first draft
unify common xacro files
remove obsolete urdf files
description: add ‘_joint’ suffix to newly introduced joint tags. This is more in-line with naming of existing joint tags.
description: add ROS-I base and tool0 frames. Fix #49 and #95. Note that ‘base’ is essentially ‘base_link’ but rotated by 180 degrees over the Z-axis. This is necessary as the visual and collision geometries appear to also have their origins rotated 180 degrees wrt the real robot. ‘tool0’ is similar to ‘ee_link’, but with its orientation such that it coincides with an all-zeros TCP setting on the UR controller. Users are expected to attach their own TCP frames to this frame, instead of updating it (see also [1]). [1] http://wiki.ros.org/Industrial/Tutorials/WorkingWithRosIndustrialRobotSupportPackages#Standardised_links_.2BAC8_frames
description: minor whitespace cleanup of UR5 & 10 xacros.
regenerate urdf files
use PositionJointInterface as hardwareInterface in transmissions - affects simulation only
Contributors: gavanderhoorn, ipa-fxm
1.0.2 (2014-03-31)
1.0.1 (2014-03-31)
changes due to file renaming
generate urdfs from latest xacros
file renaming
adapt launch files in order to be able to use normal/limited xacro
fixed typo in limits
add joint_limited urdf.xacros for both robots
(re-)add ee_link for both robots
updates for latest gazebo under hydro
remove ee_link - as in ur10
use same xacro params as ur10
use new transmission interfaces
update xml namespaces for hydro
remove obsolete urdf file
remove obsolete urdf file
Contributors: ipa-fxm
Update ur10.urdf.xacro Corrected UR10’s urdf to faithfully represent joint effort thresholds, velocity limits, and dynamics parameters.
Update ur5.urdf.xacro Corrected effort thresholds and friction values for UR5 urdf.
added corrected mesh file
Added definitions for adding tergets in install folder. Issue #10.
Corrected warning on xacro-files in hydro.
Added definitions for adding tergets in install folder. Issue #10.
Updated to catkin. ur_driver’s files were added to nested Python directory for including in other packages.
fixed name of ur5 transmissions
patched gazebo.urdf.xacro to be compatible with gazebo 1.5
fixed copy&paste error (?)
prefix versions of gazebo and transmission macros
Added joint limited urdf and associated moveit package. The joint limited package is friendlier to the default KLD IK solution
Added ur5 moveit library. The Kinematics used by the ur5 move it library is unreliable and should be replaced with the ur_kinematics
Updated urdf files use collision/visual models.
Reorganized meshes to include both collision and visual messhes (like other ROS-I robots). Modified urdf xacro to include new models. Removed extra robot pedestal link from urdf (urdfs should only include the robot itself).
minor changes on ur5 xacro files
Removed extra stl files and fixed indentions
Renamed packages and new groovy version
Added ur10 and renamed packages
Contributors: Denis Štogl, IPR-SR2, Kelsey, Mathias Lüdtke, Shaun Edwards, ipa-nhg, jrgnicho, kphawkins, robot