jcapistd.c
Go to the documentation of this file.
1 /*
2  * jcapistd.c
3  *
4  * Copyright (C) 1994-1996, Thomas G. Lane.
5  * This file is part of the Independent JPEG Group's software.
6  * For conditions of distribution and use, see the accompanying README file.
7  *
8  * This file contains application interface code for the compression half
9  * of the JPEG library. These are the "standard" API routines that are
10  * used in the normal full-compression case. They are not used by a
11  * transcoding-only application. Note that if an application links in
12  * jpeg_start_compress, it will end up linking in the entire compressor.
13  * We thus must separate this file from jcapimin.c to avoid linking the
14  * whole compression library into a transcoder.
15  */
16 
17 #define JPEG_INTERNALS
18 #include "jinclude.h"
19 #include "jpeglib.h"
20 
21 
22 /*
23  * Compression initialization.
24  * Before calling this, all parameters and a data destination must be set up.
25  *
26  * We require a write_all_tables parameter as a failsafe check when writing
27  * multiple datastreams from the same compression object. Since prior runs
28  * will have left all the tables marked sent_table=TRUE, a subsequent run
29  * would emit an abbreviated stream (no tables) by default. This may be what
30  * is wanted, but for safety's sake it should not be the default behavior:
31  * programmers should have to make a deliberate choice to emit abbreviated
32  * images. Therefore the documentation and examples should encourage people
33  * to pass write_all_tables=TRUE; then it will take active thought to do the
34  * wrong thing.
35  */
36 
37 GLOBAL(void)
39 {
40  if (cinfo->global_state != CSTATE_START)
41  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
42 
43  if (write_all_tables)
44  jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */
45 
46  /* (Re)initialize error mgr and destination modules */
47  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
48  (*cinfo->dest->init_destination) (cinfo);
49  /* Perform master selection of active modules */
50  jinit_compress_master(cinfo);
51  /* Set up for the first pass */
52  (*cinfo->master->prepare_for_pass) (cinfo);
53  /* Ready for application to drive first pass through jpeg_write_scanlines
54  * or jpeg_write_raw_data.
55  */
56  cinfo->next_scanline = 0;
57  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
58 }
59 
60 
61 /*
62  * Write some scanlines of data to the JPEG compressor.
63  *
64  * The return value will be the number of lines actually written.
65  * This should be less than the supplied num_lines only in case that
66  * the data destination module has requested suspension of the compressor,
67  * or if more than image_height scanlines are passed in.
68  *
69  * Note: we warn about excess calls to jpeg_write_scanlines() since
70  * this likely signals an application programmer error. However,
71  * excess scanlines passed in the last valid call are *silently* ignored,
72  * so that the application need not adjust num_lines for end-of-image
73  * when using a multiple-scanline buffer.
74  */
75 
79 {
80  JDIMENSION row_ctr, rows_left;
81 
82  if (cinfo->global_state != CSTATE_SCANNING)
83  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
84  if (cinfo->next_scanline >= cinfo->image_height)
85  WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
86 
87  /* Call progress monitor hook if present */
88  if (cinfo->progress != NULL) {
89  cinfo->progress->pass_counter = (long) cinfo->next_scanline;
90  cinfo->progress->pass_limit = (long) cinfo->image_height;
91  (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
92  }
93 
94  /* Give master control module another chance if this is first call to
95  * jpeg_write_scanlines. This lets output of the frame/scan headers be
96  * delayed so that application can write COM, etc, markers between
97  * jpeg_start_compress and jpeg_write_scanlines.
98  */
99  if (cinfo->master->call_pass_startup)
100  (*cinfo->master->pass_startup) (cinfo);
101 
102  /* Ignore any extra scanlines at bottom of image. */
103  rows_left = cinfo->image_height - cinfo->next_scanline;
104  if (num_lines > rows_left)
105  num_lines = rows_left;
106 
107  row_ctr = 0;
108  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
109  cinfo->next_scanline += row_ctr;
110  return row_ctr;
111 }
112 
113 
114 /*
115  * Alternate entry point to write raw data.
116  * Processes exactly one iMCU row per call, unless suspended.
117  */
118 
122 {
123  JDIMENSION lines_per_iMCU_row;
124 
125  if (cinfo->global_state != CSTATE_RAW_OK)
126  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
127  if (cinfo->next_scanline >= cinfo->image_height) {
128  WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
129  return 0;
130  }
131 
132  /* Call progress monitor hook if present */
133  if (cinfo->progress != NULL) {
134  cinfo->progress->pass_counter = (long) cinfo->next_scanline;
135  cinfo->progress->pass_limit = (long) cinfo->image_height;
136  (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
137  }
138 
139  /* Give master control module another chance if this is first call to
140  * jpeg_write_raw_data. This lets output of the frame/scan headers be
141  * delayed so that application can write COM, etc, markers between
142  * jpeg_start_compress and jpeg_write_raw_data.
143  */
144  if (cinfo->master->call_pass_startup)
145  (*cinfo->master->pass_startup) (cinfo);
146 
147  /* Verify that at least one iMCU row has been passed. */
148  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
149  if (num_lines < lines_per_iMCU_row)
150  ERREXIT(cinfo, JERR_BUFFER_SIZE);
151 
152  /* Directly compress the row. */
153  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
154  /* If compressor did not consume the whole row, suspend processing. */
155  return 0;
156  }
157 
158  /* OK, we processed one iMCU row. */
159  cinfo->next_scanline += lines_per_iMCU_row;
160  return lines_per_iMCU_row;
161 }
jpeg_write_raw_data(j_compress_ptr cinfo, JSAMPIMAGE data, JDIMENSION num_lines)
Definition: jcapistd.c:120
#define CSTATE_START
Definition: jpegint.h:25
#define FALSE
Definition: OPC_IceHook.h:9
JSAMPARRAY JDIMENSION num_lines
Definition: jpeglib.h:939
#define ERREXIT(cinfo, code)
Definition: jerror.h:205
#define CSTATE_RAW_OK
Definition: jpegint.h:27
#define CSTATE_SCANNING
Definition: jpegint.h:26
jpeg_start_compress(j_compress_ptr cinfo, boolean write_all_tables)
Definition: jcapistd.c:38
jpeg_suppress_tables(j_compress_ptr cinfo, boolean suppress)
Definition: jcapimin.c:119
jpeg_write_scanlines(j_compress_ptr cinfo, JSAMPARRAY scanlines, JDIMENSION num_lines)
Definition: jcapistd.c:77
#define WARNMS(cinfo, code)
Definition: jerror.h:238
JSAMPARRAY * JSAMPIMAGE
Definition: jpeglib.h:68
#define ERREXIT1(cinfo, code, p1)
Definition: jerror.h:208
boolean write_all_tables
Definition: jpeglib.h:937
JSAMPROW * JSAMPARRAY
Definition: jpeglib.h:67
JSAMPARRAY scanlines
Definition: jpeglib.h:939
#define GLOBAL(type)
Definition: jmorecfg.h:188
#define DCTSIZE
Definition: jpeglib.h:41
JSAMPIMAGE data
Definition: jpeglib.h:945
unsigned int JDIMENSION
Definition: jmorecfg.h:171
jinit_compress_master(j_compress_ptr cinfo)
Definition: jcinit.c:30


openhrp3
Author(s): AIST, General Robotix Inc., Nakamura Lab of Dept. of Mechano Informatics at University of Tokyo
autogenerated on Thu Sep 8 2022 02:24:04