simple_transmission.h
Go to the documentation of this file.
1 /*********************************************************************
2  * Software License Agreement (BSD License)
3  *
4  * Copyright (c) 2008, Willow Garage, Inc.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  *
11  * * Redistributions of source code must retain the above copyright
12  * notice, this list of conditions and the following disclaimer.
13  * * Redistributions in binary form must reproduce the above
14  * copyright notice, this list of conditions and the following
15  * disclaimer in the documentation and/or other materials provided
16  * with the distribution.
17  * * Neither the name of the Willow Garage nor the names of its
18  * contributors may be used to endorse or promote products derived
19  * from this software without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25  * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
27  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
29  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
31  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32  * POSSIBILITY OF SUCH DAMAGE.
33  *********************************************************************/
34 /*
35  * Author: Stuart Glaser
36  */
37 #ifndef SIMPLE_TRANSMISSION_H
38 #define SIMPLE_TRANSMISSION_H
39 
40 #include <tinyxml.h>
45 
46 namespace pr2_mechanism_model {
47 
49 {
50 public:
53 
54  bool initXml(TiXmlElement *config, Robot *robot);
55  bool initXml(TiXmlElement *config);
56 
58 
59  void propagatePosition(std::vector<pr2_hardware_interface::Actuator*>&,
60  std::vector<pr2_mechanism_model::JointState*>&);
61  void propagatePositionBackwards(std::vector<pr2_mechanism_model::JointState*>&,
62  std::vector<pr2_hardware_interface::Actuator*>&);
63  void propagateEffort(std::vector<pr2_mechanism_model::JointState*>&,
64  std::vector<pr2_hardware_interface::Actuator*>&);
65  void propagateEffortBackwards(std::vector<pr2_hardware_interface::Actuator*>&,
66  std::vector<pr2_mechanism_model::JointState*>&);
67 
68 private:
69  // if a actuated_joint is specified, apply torque based on simulated_reduction_
72 
75 
77 };
78 
79 } // namespace pr2_mechanism_model
80 
81 #endif
void propagatePositionBackwards(std::vector< pr2_mechanism_model::JointState * > &, std::vector< pr2_hardware_interface::Actuator * > &)
Uses the joint position to fill out the actuator&#39;s encoder.
void propagateEffortBackwards(std::vector< pr2_hardware_interface::Actuator * > &, std::vector< pr2_mechanism_model::JointState * > &)
Uses the actuator&#39;s commanded effort to fill out the torque on the joint.
JointCalibrationSimulator joint_calibration_simulator_
void propagateEffort(std::vector< pr2_mechanism_model::JointState * > &, std::vector< pr2_hardware_interface::Actuator * > &)
Uses commanded joint efforts to fill out commanded motor currents.
bool initXml(TiXmlElement *config, Robot *robot)
Initializes the transmission from XML data.
void propagatePosition(std::vector< pr2_hardware_interface::Actuator * > &, std::vector< pr2_mechanism_model::JointState * > &)
Uses encoder data to fill out joint position and velocities.
This class provides the controllers with an interface to the robot model.
Definition: robot.h:78


pr2_mechanism_model
Author(s): Eric Berger berger@willowgarage.com, Stuart Glaser, Wim Meeussen
autogenerated on Fri Jun 7 2019 22:04:19