XL

This is a ROS message definition.

Source

# This message is compatible with control table of Dynamixel XL Series (XL430-W250)
# If you want to specific information about control table, please follow the link (http://emanual.robotis.com/)

uint16 model_number
uint8  firmware_version
uint8  model_id
uint8  baud_rate
uint8  return_delay_time
uint8  drive_mode
uint8  operating_mode
uint8  secondary_id
uint8  protocol_version
int32  homing_offset
uint32 moving_threshold
uint8  temperature_limit
uint16 max_voltage_limit
uint16 min_voltage_limit
uint16 pwm_limit
uint32 acceleration_limit
uint32 velocity_limit
uint32 max_position_limit
uint32 min_position_limit
uint8  shutdown

uint8  torque_enable
uint8  led
uint8  status_return_level
uint8  registered_instruction
uint8  hardware_error_status
uint16 velocity_i_gain
uint16 velocity_p_gain
uint16 position_d_gain
uint16 position_i_gain
uint16 position_p_gain
uint16 feedforward_2nd_gain
uint16 feedforward_1st_gain
uint8  bus_watchdog
int16  goal_pwm
int32  goal_velocity
uint32 profile_acceleration
uint32 profile_velocity
uint32 goal_position
uint16 realtime_tick
uint8  moving
uint8  moving_status
int16  present_pwm
int16  present_load
int32  present_velocity
int32  present_position
uint32 velocity_trajectory
uint32 position_trajectory
uint16 present_input_voltage
uint8  present_temperature