corobot_phidget_ik
this package is an interface to the device Phidget interface Kit 8/8/8 for CoroWare's robot Corobot.
corobot_phidgetIK is ...
Services
The phidget node provides the following device services:
- phidgetnode_set_odom
- Service Type : corobot_srvs::SetOdom
- This service is used to set the odometer.
Topics
Input
Output
- position_data
- Message Type : corobot_msgs::PosMsg
- This topic sends every 200ms the position of the robot.
- infrared_data
- Message Type : corobot_msgs::IrMsg
- This topic sends every 200ms the voltage value of both infrared sensors. It also send the conversion in meters.
- power_data
- Message Type : corobot_msgs::PowerMsg
- This topic sends every 200ms the power of battery left(in Volt)
- bumper_data
- Message Type : corobot_msgs::BumperMsg
- This topic sends every 200ms information coming from the Bumper to tell if an obstacle has been hit or not.
- gripper_data
- Message Type : corobot_msgs::GrippergMsg
- This topic sends every 200ms information coming from the gripper.
- spatial_data
- Message Type : corobot_msgs::spatial
- This topic sends every 200ms information coming from the imu.
- imu_data
- Message Type : sensor_msgs::Imu
- This topic sends every 200ms information coming from the imu.
- phidget_info
- Message Type : corobot_msgs::phidget_info
- This topic sends once at the creation of the node information related the initialization of the phidget device.
- sonar_data
- Message Type : corobot_msgs::RangeSensor
- This topic sends every 50ms the range in meters of every sonar sensors connected, if any.
codeapi