$search

embedded_linux_comms.c

Go to the documentation of this file.

/*
 * embedded_linux_comms.c
 *
 *  Created on: Jun 16, 2012
 *      Author: bouchier
 */

#ifndef ROS_EMBEDDED_LINUX_COMMS_H
#define ROS_EMBEDDED_LINUX_COMMS_H

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <termios.h>
#include <string.h>
#include <time.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netinet/tcp.h>
#include <netdb.h>
#include <assert.h>

#define DEFAULT_PORTNUM 11411

void error(const char *msg)
{
    perror(msg);
    exit(0);
}

void set_nonblock(int socket)
{
int flags;
flags = fcntl(socket,F_GETFL,0);
assert(flags != -1);
fcntl(socket, F_SETFL, flags | O_NONBLOCK);
}

int elCommInit(char *portName, int baud)
{
        struct termios options;
        int fd;
        char *ip;
        char *tcpPortNumString;
        long int tcpPortNum;
        int sockfd;
        struct sockaddr_in serv_addr;
        struct hostent *server;
        int rv;

        if (*portName == '/') {                 // linux serial port names always begin with /dev
                printf("Opening serial port %s\n", portName);

                fd = open(portName, O_RDWR | O_NOCTTY | O_NDELAY);

                if (fd == -1){
                        //Could not open the port.
                        perror("init(): Unable to open serial port - ");
                }
                else{
                        fcntl(fd, F_SETFL, FNDELAY); // Sets the read() function to return NOW and not wait for data to enter buffer if there isn't anything there.

                        //Configure port for 8N1 transmission
                        tcgetattr(fd, &options);                                        //Gets the current options for the port
                        cfsetispeed(&options, B57600);                          //Sets the Input Baud Rate
                        cfsetospeed(&options, B57600);                          //Sets the Output Baud Rate
                        options.c_cflag |= (CLOCAL | CREAD);            //? all these set options for 8N1 serial operations
                        options.c_cflag &= ~PARENB;
                        options.c_cflag &= ~CSTOPB;
                        options.c_cflag &= ~CSIZE;
                        options.c_cflag |= CS8;
                        options.c_cflag &= ~CRTSCTS;
                        options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);     // set raw mode
                        options.c_iflag &= ~(IXON | IXOFF | IXANY);             // disable SW flow control
                        options.c_oflag &= ~OPOST;

                        tcsetattr(fd, TCSANOW, &options);                       //Set the new options for the port "NOW"
                }
                return fd;
        } else {                // Connect to the rosserial server
                // figure out the port number to use
                ip = strtok(portName, ":");                     // IP address should be e.g. 192.168.1.10 or 192.168.1.10:11411
                tcpPortNumString = strtok(NULL, ":");   // get the port # if specified
                tcpPortNum = 0;
                if (tcpPortNumString != NULL) {
                        tcpPortNum = strtol(tcpPortNumString, NULL, 10);        // convert port num string to long
                }
                if (tcpPortNum == 0){                           // if port was not specified, or was not numeric
                        tcpPortNum = DEFAULT_PORTNUM;
                }
                printf("Connecting to TCP server at %s:%ld....\n", ip, tcpPortNum);

                // create the socket
            sockfd = socket(AF_INET, SOCK_STREAM, 0);
            if (sockfd < 0) {
                error("ERROR opening socket");
                exit(-1);
            }

            /* Disable the Nagle (TCP No Delay) algorithm */
            int flag = 1;
            rv = setsockopt( sockfd, IPPROTO_TCP, TCP_NODELAY, (char *)&flag, sizeof(flag) );
            if (rv == -1) {
              printf("Couldn't setsockopt(TCP_NODELAY)\n");
              exit( -1 );
            }

            // connect to the server
            server = gethostbyname(ip);
            if (server == NULL) {
                fprintf(stderr,"ERROR, no such host\n");
                exit(0);
            }
            bzero((char *) &serv_addr, sizeof(serv_addr));
            serv_addr.sin_family = AF_INET;
            bcopy((char *)server->h_addr,
                 (char *)&serv_addr.sin_addr.s_addr,
                 server->h_length);
            serv_addr.sin_port = htons(tcpPortNum);
            if (connect(sockfd,(struct sockaddr *) &serv_addr,sizeof(serv_addr)) < 0)
                error("ERROR connecting");
            set_nonblock(sockfd);
            printf("connected to server\n");
            return sockfd;
        }
        return -1;
}

int elCommRead(int fd)
{
        unsigned char c;
        unsigned int i;
        int rv;
        rv = read(fd, &c, 1);   // read one byte
        i = c;                                  // convert byte to an int for return
        if (rv > 0)
                return i;                       // return the character read
        if (rv < 0) {
                if ((errno != EAGAIN) && (errno != EWOULDBLOCK))
                        perror("elCommRead() error:");
        }
        return rv;                              // return -1 or 0 either if we read nothing, or if read returned negative
}

int elCommWrite(int fd, uint8_t* data, int len)
{
        int rv;
        int length = len;
        int totalsent = 0;
        while (totalsent < length) {
                rv = write(fd, data+totalsent, length);
                if (rv < 0)
                        perror("write(): error writing - trying again - ");
                else
                        totalsent += rv;
        }
        return rv;
}

#endif

---

rosserial_embeddedlinux
Author(s): Paul Bouchier
autogenerated on Sat Mar 2 13:26:14 2013