This package combines the Roboception convenience layer for images with the GenICam reference implementation and a GigE Vision transport layer. It is a self contained package that permits configuration and image streaming of GenICam / GigE Vision 2.0 compatible cameras like the Roboception rc_visard. The API is based on C++ 11 and can be compiled under Linux and Windows.
This package also provides some tools that can be called from the command line for discovering cameras, changing their configuration and streaming images. Although the tools are meant to be useful when working in a shell or in a script, their main purpose is to serve as example on how to use the API for reading and setting parameters, streaming and synchronizing images.
Version 2.0.0 introduced some API changes that require minor changes of programs that use the classes Buffer, Image and ImageList.
An object of class Buffer can now represents a single buffer as well as a multipart buffer, depending on the availability of multipart support in the used GenTL producer and the GigE vision device. Multipart buffers can contain more than one image. For simplicity of the interface, non-multipart buffers are now treated like multipart buffers with just one image.
For writing code that is able to support multipart, after grabbing the buffer, the number of parts must be requested with the method Buffer::getNumberOfParts() and a loop must be added to cycle over all parts. All methods that access image specific data have been extended by a second parameter for providing the 0 based part index. The following existing methods have been changed:
Another important change is to use the new method Buffer::getGlobalBase() for getting the address used to connect a buffer with the nodemap for accessing chunk parameters instead of Buffer::getBase(). Other, new methods include:
Building follows the standard cmake build flow. Please make sure to set the install path before compiling. Otherwise it can happen that the transport layer is not found when calling the tools.
cd <main-directory> mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=<install-directory> .. make make install
To install bash completion, configure cmake with
A Debian package can be built with e.g.
cd <main-directory> mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=/usr .. make make package
Building is based on cmake. Therefore, cmake must be downloaded and installed according to the operating system from https://cmake.org/download/ After starting the cmake-gui, the path to the rc_genicam_api source code directory as well as the build directory must be specified. It is common to choose a sub-directory of the source code directory and name it 'build' for the the temporary files that are created during the build process. After setting both paths, the 'Configure' button must be pressed. In the up-coming dialog, it can be chosen for which version of Visual Studio and which platform (e.g. Win64) the project files should be generated. The dialog is closed by pressing 'Finish'.
After configuration, the value of the key with the name
CMAKE_INSTALL_PREFIX may be changed to an install directory. By default, the install directory is set to a path like
C:/Program Files/rc_genicam_api. The 'Generate' button leads to creating the project file. Visual Studio can be opened with this project by pressing the 'Open Project' button.
By default, a 'Debug' version will be compiled. This can be changed to 'Release' for compiling an optimized version. The package can then be created, e.g. by pressing 'F7'. For installing the compiled package, the 'INSTALL' target can be created in the project explorer.
After installation, the install directory will contain three sub-directories. The 'bin' directory contains the tools, DLLs and the default transport layer including configuration. The 'include' and 'lib' sub-directories contain the headers and libraries for using the API in own programs.
NOTE: For using the libraries in own projects, define the symbol
GENICAM_NO_AUTO_IMPLIB in your project file to avoid linker problems with the GenICam libraries.
The tools do not offer a graphical user interface. They are meant to be called from a shell (e.g. Power Shell under Windows) or script and controlled by command line parameters. Calling the tools without any parameters prints a help text on the standard output.
NOTE: If any tool returns the error
No transport layers found in path ..., then read the section 'Transport Layer' below.
Lists all available systems (i.e. transport layers), interfaces and devices with some information. If a device ID is given on the command line, then the complete GenICam nodemap with all parameters and their current values are listed.
Can be used to list network specific information of GenICam compatible GigE Vision 2 cameras. The network settings as well as all other parameters provided via GenICam can be changed.
This tool shows how to configure and stream images from a camera. GenICam features can be configured directly from the command line. Images will be stored in PGM or PPM format, depending on the image format.
Streams of the Roboception rc_visard can be enabled or disabled directly on the command line by setting the appropriate GenICam parameters. The following command enables intensity images, disables disparity images and stores 10 images:
NOTE: Many image viewers can display PGM and PPM format. The sv tool of cvkit (https://github.com/roboception/cvkit) can also be used.
This tool streams the left image, disparity, confidence and error from a Roboception rc_visard sensor. It takes the first set of time synchronous images, computes a colored point cloud and stores it in PLY ASCII format. This tool demonstrates how to synchronize different images according to their timestamps.
NOTE: PLY is a standard format for scanned 3D data that can be read by many programs. The plyv tool of cvkit (https://github.com/roboception/cvkit) can also be used for visualization.
There are multiple ways of specifying an ID to identify a device.
The given ID can also be a user defined name. The user defined name is set to
rc_visard by default and can be changed with:
gc_config <ID> -n <user-defined-name>
This way of identifying a device can fail if there is more than one device with the same name. No device is returned in this case.
If the user defined name contains one or more colons, it must be preceded by a colon (e.g.
:my:name) or an interface ID (see below).
The device ID of the GenTL producer (see
Transport Layer section below) may also be used. This ID is unique, but not persistent as it depends on the implementation of the GenTL producer. Thus, it can change after software updates. It often encodes the MAC address of the sensor in some way.
All three options can be seen in the output of
If the given ID contains a colon (i.e.
:), the part before the (first) colon is interpreted as interface ID and the part after the first colon is treated as device ID. This is the format that
gc_config -l shows. A device with the given ID is only sought on the specified interface. This can be useful if there are several ways to reach a device from a host computer, e.g. via wireless and wired network connection, but a certain connection type (e.g. wired) is preferred due to higher bandwidth and lower latency.
A colon at the beginning of the ID effectively defines an empty interface ID which triggers looking on all interfaces.
If the given ID does not contain a colon, the ID is interpreted as the device ID itself and is sought throughout all interfaces as well.
The communication to the device is done through a so called transport layer (i.e. GenTL producer version 1.5 or higher). This package provides and installs a default transport layer that implements the GigE Vision protocol for connecting to the Roboception rc_visard. According to the GenICam specification, the transport layer has the suffix '.cti'. The environment variable
GENICAM_GENTL32_PATH (for 32 bit applications) or
GENICAM_GENTL64_PATH (for 64 bit applications) must contain a list of paths that contain transport layers. All transport layers are provided as systems to the application.
For convenience, if the environment variable is not defined or empty, it is internally defined with the install path of the provided transport layer (as known at compile time!). If the package is not installed, the install path is changed after compilation or the package is moved to another location after installation, then the transport layer may not be found. In this case, the tools shows an error like e.g.:
'No transport layers found in path /usr/lib/rc_genicam_api'
In this case, the corresponding environment variable (see above) must be set to the directory in which the transport layer (i.e. file with suffix '.cti') resides.
Under Windows, as second fall back additionally to the install path, the directory of the executable is also added to the environment variable. Thus, the install directory can be moved, as long as the cti file stays in the same directory as the executable.
When images are received at a lower rate than set/exepected the most likely problem is that this (user space) library cannot read the many UDP packets fast enough resulting in incomplete image buffers.
net_perf_check.sh script performs some simple checks and should be run while or after streaming images via GigE Vision.
First of all increasing the UDP packet size (using jubo frames) is strongly recommended! Increase the MTU of your network interface to 9000, e.g.
sudo ifconfig eth0 mtu 9000
Also make sure that all network devices/switches between your host and the sensor support this.
There are several Linux sysctl options that can be modified to increase performance for the GigE Vision usecase.
These values can be changed during runtime with
sysctl or written to
/etc/sysctl.conf for persistence across reboots.
If the number of UDP RcvbufErrors increases while streaming, increasing the socket receive buffer size usually fixes the problem.
Check the RcvbufErrors with
netstat -us | grep RcvbufErrors
Increase max receive buffer size:
sudo sysctl -w net.core.rmem_max=33554432
Changing these values is usually not necessary, but can help if the kernel is already dropping packets.
net_perf_check.sh and increase the values if needed:
sudo sysctl -w net.core.netdev_max_backlog=2000 sudo sysctl -w net.core.netdev_budget=600