stm32f30x_dbgmcu.h
Go to the documentation of this file.
1 
28 /* Define to prevent recursive inclusion -------------------------------------*/
29 #ifndef __STM32F30x_DBGMCU_H
30 #define __STM32F30x_DBGMCU_H
31 
32 #ifdef __cplusplus
33  extern "C" {
34 #endif
35 
36 /* Includes ------------------------------------------------------------------*/
37 #include "stm32f30x.h"
38 
47 /* Exported types ------------------------------------------------------------*/
48 /* Exported constants --------------------------------------------------------*/
49 
53 #define DBGMCU_SLEEP ((uint32_t)0x00000001)
54 #define DBGMCU_STOP ((uint32_t)0x00000002)
55 #define DBGMCU_STANDBY ((uint32_t)0x00000004)
56 #define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
57 
58 #define DBGMCU_TIM2_STOP ((uint32_t)0x00000001)
59 #define DBGMCU_TIM3_STOP ((uint32_t)0x00000002)
60 #define DBGMCU_TIM4_STOP ((uint32_t)0x00000004)
61 #define DBGMCU_TIM6_STOP ((uint32_t)0x00000010)
62 #define DBGMCU_TIM7_STOP ((uint32_t)0x00000020)
63 #define DBGMCU_RTC_STOP ((uint32_t)0x00000400)
64 #define DBGMCU_WWDG_STOP ((uint32_t)0x00000800)
65 #define DBGMCU_IWDG_STOP ((uint32_t)0x00001000)
66 #define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
67 #define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
68 #define DBGMCU_CAN1_STOP ((uint32_t)0x02000000)
69 
70 #define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xFD9FE3C8) == 0x00) && ((PERIPH) != 0x00))
71 
72 #define DBGMCU_TIM1_STOP ((uint32_t)0x00000001)
73 #define DBGMCU_TIM8_STOP ((uint32_t)0x00000002)
74 #define DBGMCU_TIM15_STOP ((uint32_t)0x00000004)
75 #define DBGMCU_TIM16_STOP ((uint32_t)0x00000008)
76 #define DBGMCU_TIM17_STOP ((uint32_t)0x00000010)
77 #define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFE0) == 0x00) && ((PERIPH) != 0x00))
78 
83 /* Exported macro ------------------------------------------------------------*/
84 /* Exported functions --------------------------------------------------------*/
85 /* Device and Revision ID management functions ********************************/
86 uint32_t DBGMCU_GetREVID(void);
87 uint32_t DBGMCU_GetDEVID(void);
88 
89 /* Peripherals Configuration functions ****************************************/
90 void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
91 void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
92 void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
93 
94 #ifdef __cplusplus
95 }
96 #endif
97 
98 #endif /* __STM32F30x_DBGMCU_H */
99 
108 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
uint32_t DBGMCU_GetDEVID(void)
Returns the device identifier.
FunctionalState
Definition: stm32f4xx.h:708
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
Configures the specified peripheral and low power mode behavior when the MCU under Debug mode...
uint32_t DBGMCU_GetREVID(void)
Returns the device revision identifier.
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
Configures APB1 peripheral behavior when the MCU is in Debug mode.
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState)
Configures APB2 peripheral behavior when the MCU is in Debug mode.


rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:25