This file provides all the SPI firmware functions. More...
Include dependency graph for stm32f10x_spi.c:
Go to the source code of this file.
Macros | |
| #define | CR1_CLEAR_Mask ((uint16_t)0x3040) |
| #define | CR1_CRCEN_Reset ((uint16_t)0xDFFF) |
| #define | CR1_CRCEN_Set ((uint16_t)0x2000) |
| #define | CR1_CRCNext_Set ((uint16_t)0x1000) |
| #define | CR1_SPE_Reset ((uint16_t)0xFFBF) |
| #define | CR1_SPE_Set ((uint16_t)0x0040) |
| #define | CR2_SSOE_Reset ((uint16_t)0xFFFB) |
| #define | CR2_SSOE_Set ((uint16_t)0x0004) |
| #define | I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) |
| #define | I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) |
| #define | I2S_DIV_MASK ((uint32_t)(0x000000F0)) |
| #define | I2S_Mode_Select ((uint16_t)0x0800) |
| #define | I2S_MUL_MASK ((uint32_t)(0x0000F000)) |
| #define | I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) |
| #define | I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) |
| #define | I2SCFGR_I2SE_Set ((uint16_t)0x0400) |
| #define | SPI_Mode_Select ((uint16_t)0xF7FF) |
Functions | |
| void | I2S_Cmd (SPI_TypeDef *SPIx, FunctionalState NewState) |
| Enables or disables the specified SPI peripheral (in I2S mode). More... | |
| void | I2S_Init (SPI_TypeDef *SPIx, I2S_InitTypeDef *I2S_InitStruct) |
| Initializes the SPIx peripheral according to the specified parameters in the I2S_InitStruct. More... | |
| void | I2S_StructInit (I2S_InitTypeDef *I2S_InitStruct) |
| Fills each I2S_InitStruct member with its default value. More... | |
| void | SPI_BiDirectionalLineConfig (SPI_TypeDef *SPIx, uint16_t SPI_Direction) |
| Selects the data transfer direction in bi-directional mode for the specified SPI. More... | |
| void | SPI_CalculateCRC (SPI_TypeDef *SPIx, FunctionalState NewState) |
| Enables or disables the CRC value calculation of the transferred bytes. More... | |
| void | SPI_Cmd (SPI_TypeDef *SPIx, FunctionalState NewState) |
| Enables or disables the specified SPI peripheral. More... | |
| void | SPI_DataSizeConfig (SPI_TypeDef *SPIx, uint16_t SPI_DataSize) |
| Configures the data size for the selected SPI. More... | |
| uint16_t | SPI_GetCRC (SPI_TypeDef *SPIx, uint8_t SPI_CRC) |
| Returns the transmit or the receive CRC register value for the specified SPI. More... | |
| uint16_t | SPI_GetCRCPolynomial (SPI_TypeDef *SPIx) |
| Returns the CRC Polynomial register value for the specified SPI. More... | |
| void | SPI_I2S_ClearFlag (SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG) |
| Clears the SPIx CRC Error (CRCERR) flag. More... | |
| void | SPI_I2S_ClearITPendingBit (SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT) |
| Clears the SPIx CRC Error (CRCERR) interrupt pending bit. More... | |
| void | SPI_I2S_DeInit (SPI_TypeDef *SPIx) |
| Deinitializes the SPIx peripheral registers to their default reset values (Affects also the I2Ss). More... | |
| void | SPI_I2S_DMACmd (SPI_TypeDef *SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) |
| Enables or disables the SPIx/I2Sx DMA interface. More... | |
| FlagStatus | SPI_I2S_GetFlagStatus (SPI_TypeDef *SPIx, uint16_t SPI_I2S_FLAG) |
| Checks whether the specified SPI/I2S flag is set or not. More... | |
| ITStatus | SPI_I2S_GetITStatus (SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT) |
| Checks whether the specified SPI/I2S interrupt has occurred or not. More... | |
| void | SPI_I2S_ITConfig (SPI_TypeDef *SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) |
| Enables or disables the specified SPI/I2S interrupts. More... | |
| uint16_t | SPI_I2S_ReceiveData (SPI_TypeDef *SPIx) |
| Returns the most recent received data by the SPIx/I2Sx peripheral. More... | |
| void | SPI_I2S_SendData (SPI_TypeDef *SPIx, uint16_t Data) |
| Transmits a Data through the SPIx/I2Sx peripheral. More... | |
| void | SPI_Init (SPI_TypeDef *SPIx, SPI_InitTypeDef *SPI_InitStruct) |
| Initializes the SPIx peripheral according to the specified parameters in the SPI_InitStruct. More... | |
| void | SPI_NSSInternalSoftwareConfig (SPI_TypeDef *SPIx, uint16_t SPI_NSSInternalSoft) |
| Configures internally by software the NSS pin for the selected SPI. More... | |
| void | SPI_SSOutputCmd (SPI_TypeDef *SPIx, FunctionalState NewState) |
| Enables or disables the SS output for the selected SPI. More... | |
| void | SPI_StructInit (SPI_InitTypeDef *SPI_InitStruct) |
| Fills each SPI_InitStruct member with its default value. More... | |
| void | SPI_TransmitCRC (SPI_TypeDef *SPIx) |
| Transmit the SPIx CRC value. More... | |
Detailed Description
This file provides all the SPI firmware functions.
- Version
- V3.5.0
- Date
- 11-March-2011
- Attention
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm32f10x_spi.c.