This file provides all the CAN firmware functions. More...
Include dependency graph for stm32f10x_can.c:
Go to the source code of this file.
Macros | |
| #define | CAN_FLAGS_ESR ((uint32_t)0x00F00000) |
| #define | CAN_FLAGS_MSR ((uint32_t)0x01000000) |
| #define | CAN_FLAGS_RF0R ((uint32_t)0x02000000) |
| #define | CAN_FLAGS_RF1R ((uint32_t)0x04000000) |
| #define | CAN_FLAGS_TSR ((uint32_t)0x08000000) |
| #define | CAN_MODE_MASK ((uint32_t) 0x00000003) |
| #define | CAN_TXMAILBOX_0 ((uint8_t)0x00) |
| #define | CAN_TXMAILBOX_1 ((uint8_t)0x01) |
| #define | CAN_TXMAILBOX_2 ((uint8_t)0x02) |
| #define | FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ |
| #define | INAK_TIMEOUT ((uint32_t)0x0000FFFF) |
| #define | MCR_DBF ((uint32_t)0x00010000) /* software master reset */ |
| #define | SLAK_TIMEOUT ((uint32_t)0x0000FFFF) |
| #define | TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ |
Functions | |
| void | CAN_CancelTransmit (CAN_TypeDef *CANx, uint8_t Mailbox) |
| Cancels a transmit request. More... | |
| void | CAN_ClearFlag (CAN_TypeDef *CANx, uint32_t CAN_FLAG) |
| Clears the CAN's pending flags. More... | |
| void | CAN_ClearITPendingBit (CAN_TypeDef *CANx, uint32_t CAN_IT) |
| Clears the CANx's interrupt pending bits. More... | |
| void | CAN_DBGFreeze (CAN_TypeDef *CANx, FunctionalState NewState) |
| Enables or disables the DBG Freeze for CAN. More... | |
| void | CAN_DeInit (CAN_TypeDef *CANx) |
| Deinitializes the CAN peripheral registers to their default reset values. More... | |
| void | CAN_FIFORelease (CAN_TypeDef *CANx, uint8_t FIFONumber) |
| Releases the specified FIFO. More... | |
| void | CAN_FilterInit (CAN_FilterInitTypeDef *CAN_FilterInitStruct) |
| Initializes the CAN peripheral according to the specified parameters in the CAN_FilterInitStruct. More... | |
| FlagStatus | CAN_GetFlagStatus (CAN_TypeDef *CANx, uint32_t CAN_FLAG) |
| Checks whether the specified CAN flag is set or not. More... | |
| ITStatus | CAN_GetITStatus (CAN_TypeDef *CANx, uint32_t CAN_IT) |
| Checks whether the specified CANx interrupt has occurred or not. More... | |
| uint8_t | CAN_GetLastErrorCode (CAN_TypeDef *CANx) |
| Returns the CANx's last error code (LEC). More... | |
| uint8_t | CAN_GetLSBTransmitErrorCounter (CAN_TypeDef *CANx) |
| Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). More... | |
| uint8_t | CAN_GetReceiveErrorCounter (CAN_TypeDef *CANx) |
| Returns the CANx Receive Error Counter (REC). More... | |
| uint8_t | CAN_Init (CAN_TypeDef *CANx, CAN_InitTypeDef *CAN_InitStruct) |
| Initializes the CAN peripheral according to the specified parameters in the CAN_InitStruct. More... | |
| void | CAN_ITConfig (CAN_TypeDef *CANx, uint32_t CAN_IT, FunctionalState NewState) |
| Enables or disables the specified CANx interrupts. More... | |
| uint8_t | CAN_MessagePending (CAN_TypeDef *CANx, uint8_t FIFONumber) |
| Returns the number of pending messages. More... | |
| uint8_t | CAN_OperatingModeRequest (CAN_TypeDef *CANx, uint8_t CAN_OperatingMode) |
| Select the CAN Operation mode. More... | |
| void | CAN_Receive (CAN_TypeDef *CANx, uint8_t FIFONumber, CanRxMsg *RxMessage) |
| Receives a message. More... | |
| void | CAN_SlaveStartBank (uint8_t CAN_BankNumber) |
| Select the start bank filter for slave CAN. More... | |
| uint8_t | CAN_Sleep (CAN_TypeDef *CANx) |
| Enters the low power mode. More... | |
| void | CAN_StructInit (CAN_InitTypeDef *CAN_InitStruct) |
| Fills each CAN_InitStruct member with its default value. More... | |
| uint8_t | CAN_Transmit (CAN_TypeDef *CANx, CanTxMsg *TxMessage) |
| Initiates the transmission of a message. More... | |
| uint8_t | CAN_TransmitStatus (CAN_TypeDef *CANx, uint8_t TransmitMailbox) |
| Checks the transmission of a message. More... | |
| void | CAN_TTComModeCmd (CAN_TypeDef *CANx, FunctionalState NewState) |
| Enables or disabes the CAN Time TriggerOperation communication mode. More... | |
| uint8_t | CAN_WakeUp (CAN_TypeDef *CANx) |
| Wakes the CAN up. More... | |
| static ITStatus | CheckITStatus (uint32_t CAN_Reg, uint32_t It_Bit) |
| Checks whether the CAN interrupt has occurred or not. More... | |
Detailed Description
This file provides all the CAN firmware functions.
- Version
- V3.5.0
- Date
- 11-March-2011
- Attention
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm32f10x_can.c.