Public Attributes | List of all members
HRTIM_BasicOnePulseChannelCfgTypeDef Struct Reference

Basic One Pulse mode configuration definition. More...

#include <stm32f30x_hrtim.h>

Public Attributes

uint32_t Event
 
uint32_t EventFilter
 
uint32_t EventPolarity
 
uint32_t EventSensitivity
 
uint32_t OutputIdleState
 
uint32_t OutputPolarity
 
uint32_t Pulse
 

Detailed Description

Basic One Pulse mode configuration definition.

Definition at line 133 of file stm32f30x_hrtim.h.

Member Data Documentation

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::Event

Specifies the external event triggering the pulse generation This parameter can be any 'EEVx' value of HRTIM_Capture_Unit_Trigger

Definition at line 140 of file stm32f30x_hrtim.h.

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::EventFilter

Defines the frequency used to sample the External Event and the length of the digital filter This parameter can be a value of HRTIM_ExternalEventFilter

Definition at line 146 of file stm32f30x_hrtim.h.

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::EventPolarity

Specifies the polarity of the external event (in case of level sensitivity) This parameter can be a value of HRTIM_ExternalEventPolarity

Definition at line 142 of file stm32f30x_hrtim.h.

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::EventSensitivity

Specifies the sensitivity of the external event This parameter can be a value of HRTIM_ExternalEventSensitivity

Definition at line 144 of file stm32f30x_hrtim.h.

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::OutputIdleState

Specifies whether the output level is active or inactive when in IDLE state This parameter can be any value of HRTIM_Output_IDLE_State

Definition at line 138 of file stm32f30x_hrtim.h.

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::OutputPolarity

Specifies the output polarity This parameter can be any value of HRTIM_Output_Polarity

Definition at line 136 of file stm32f30x_hrtim.h.

uint32_t HRTIM_BasicOnePulseChannelCfgTypeDef::Pulse

Specifies the compare value to be loaded into the Compare Register. The compare value must be above or equal to 3 periods of the fHRTIM clock

Definition at line 134 of file stm32f30x_hrtim.h.


The documentation for this struct was generated from the following file:


rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Fri Jan 24 2020 03:21:44