Classes | Macros | Functions
stm32f30x_usart.h File Reference

This file contains all the functions prototypes for the USART firmware library. More...

#include "stm32f30x.h"
Include dependency graph for stm32f30x_usart.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes

struct  USART_ClockInitTypeDef
 USART Clock Init Structure definition. More...
 
struct  USART_InitTypeDef
 USART Init Structure definition. More...
 

Macros

#define IS_USART_1234_PERIPH(PERIPH)
 
#define IS_USART_123_PERIPH(PERIPH)
 
#define IS_USART_ADDRESS_DETECTION(ADDRESS)
 
#define IS_USART_ALL_PERIPH(PERIPH)
 
#define IS_USART_AUTO_RETRY_COUNTER(COUNTER)   ((COUNTER) <= 0x7)
 
#define IS_USART_AUTOBAUDRATE_MODE(MODE)
 
#define IS_USART_BAUDRATE(BAUDRATE)   (((BAUDRATE) > 0) && ((BAUDRATE) < 0x005B8D81))
 
#define IS_USART_CLEAR_FLAG(FLAG)
 
#define IS_USART_CLEAR_IT(IT)
 
#define IS_USART_CLOCK(CLOCK)
 
#define IS_USART_CONFIG_IT(IT)
 
#define IS_USART_CPHA(CPHA)   (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
 
#define IS_USART_CPOL(CPOL)   (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
 
#define IS_USART_DATA(DATA)   ((DATA) <= 0x1FF)
 
#define IS_USART_DE_ASSERTION_DEASSERTION_TIME(TIME)   ((TIME) <= 0x1F)
 
#define IS_USART_DE_POLARITY(POLARITY)
 
#define IS_USART_DMAONERROR(DMAERROR)
 
#define IS_USART_DMAREQ(DMAREQ)
 
#define IS_USART_FLAG(FLAG)
 
#define IS_USART_GET_IT(IT)
 
#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)
 
#define IS_USART_INVERSTION_PIN(PIN)
 
#define IS_USART_IRDA_MODE(MODE)
 
#define IS_USART_LASTBIT(LASTBIT)
 
#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH)
 
#define IS_USART_MODE(MODE)
 
#define IS_USART_MUTEMODE_WAKEUP(WAKEUP)
 
#define IS_USART_OVRDETECTION(OVR)
 
#define IS_USART_PARITY(PARITY)
 
#define IS_USART_REQUEST(REQUEST)
 
#define IS_USART_STOPBITS(STOPBITS)
 
#define IS_USART_STOPMODE_WAKEUPSOURCE(SOURCE)
 
#define IS_USART_TIMEOUT(TIMEOUT)   ((TIMEOUT) <= 0x00FFFFFF)
 
#define IS_USART_WORD_LENGTH(LENGTH)
 
#define USART_AddressLength_4b   ((uint32_t)0x00000000)
 
#define USART_AddressLength_7b   USART_CR2_ADDM7
 
#define USART_AutoBaudRate_0x55Frame   (USART_CR2_ABRMODE_0 | USART_CR2_ABRMODE_1)
 
#define USART_AutoBaudRate_0x7FFrame   USART_CR2_ABRMODE_1
 
#define USART_AutoBaudRate_FallingEdge   USART_CR2_ABRMODE_0
 
#define USART_AutoBaudRate_StartBit   ((uint32_t)0x00000000)
 
#define USART_Clock_Disable   ((uint32_t)0x00000000)
 
#define USART_Clock_Enable   USART_CR2_CLKEN
 
#define USART_CPHA_1Edge   ((uint32_t)0x00000000)
 
#define USART_CPHA_2Edge   USART_CR2_CPHA
 
#define USART_CPOL_High   USART_CR2_CPOL
 
#define USART_CPOL_Low   ((uint32_t)0x00000000)
 
#define USART_DEPolarity_High   ((uint32_t)0x00000000)
 
#define USART_DEPolarity_Low   USART_CR3_DEP
 
#define USART_DMAOnError_Disable   USART_CR3_DDRE
 
#define USART_DMAOnError_Enable   ((uint32_t)0x00000000)
 
#define USART_DMAReq_Rx   USART_CR3_DMAR
 
#define USART_DMAReq_Tx   USART_CR3_DMAT
 
#define USART_FLAG_ABRE   USART_ISR_ABRE
 
#define USART_FLAG_ABRF   USART_ISR_ABRF
 
#define USART_FLAG_BUSY   USART_ISR_BUSY
 
#define USART_FLAG_CM   USART_ISR_CMF
 
#define USART_FLAG_CTS   USART_ISR_CTSIF
 
#define USART_FLAG_EOB   USART_ISR_EOBF
 
#define USART_FLAG_FE   USART_ISR_FE
 
#define USART_FLAG_IDLE   USART_ISR_IDLE
 
#define USART_FLAG_LBD   USART_ISR_LBD
 
#define USART_FLAG_nCTSS   USART_ISR_CTS
 
#define USART_FLAG_NE   USART_ISR_NE
 
#define USART_FLAG_ORE   USART_ISR_ORE
 
#define USART_FLAG_PE   USART_ISR_PE
 
#define USART_FLAG_REACK   USART_ISR_REACK
 
#define USART_FLAG_RTO   USART_ISR_RTOF
 
#define USART_FLAG_RWU   USART_ISR_RWU
 
#define USART_FLAG_RXNE   USART_ISR_RXNE
 
#define USART_FLAG_SBK   USART_ISR_SBKF
 
#define USART_FLAG_TC   USART_ISR_TC
 
#define USART_FLAG_TEACK   USART_ISR_TEACK
 
#define USART_FLAG_TXE   USART_ISR_TXE
 
#define USART_FLAG_WU   USART_ISR_WUF
 
#define USART_HardwareFlowControl_CTS   USART_CR3_CTSE
 
#define USART_HardwareFlowControl_None   ((uint32_t)0x00000000)
 
#define USART_HardwareFlowControl_RTS   USART_CR3_RTSE
 
#define USART_HardwareFlowControl_RTS_CTS   (USART_CR3_RTSE | USART_CR3_CTSE)
 
#define USART_InvPin_Rx   USART_CR2_RXINV
 
#define USART_InvPin_Tx   USART_CR2_TXINV
 
#define USART_IrDAMode_LowPower   USART_CR3_IRLP
 
#define USART_IrDAMode_Normal   ((uint32_t)0x00000000)
 
#define USART_IT_CM   ((uint32_t)0x0011010E)
 
#define USART_IT_CTS   ((uint32_t)0x0009030A)
 
#define USART_IT_EOB   ((uint32_t)0x000C011B)
 
#define USART_IT_ERR   ((uint32_t)0x00000300)
 
#define USART_IT_FE   ((uint32_t)0x00010300)
 
#define USART_IT_IDLE   ((uint32_t)0x00040104)
 
#define USART_IT_LBD   ((uint32_t)0x00080206)
 
#define USART_IT_NE   ((uint32_t)0x00020300)
 
#define USART_IT_ORE   ((uint32_t)0x00030300)
 
#define USART_IT_PE   ((uint32_t)0x00000108)
 
#define USART_IT_RTO   ((uint32_t)0x000B011A)
 
#define USART_IT_RXNE   ((uint32_t)0x00050105)
 
#define USART_IT_TC   ((uint32_t)0x00060106)
 
#define USART_IT_TXE   ((uint32_t)0x00070107)
 
#define USART_IT_WU   ((uint32_t)0x00140316)
 
#define USART_LastBit_Disable   ((uint32_t)0x00000000)
 
#define USART_LastBit_Enable   USART_CR2_LBCL
 
#define USART_LINBreakDetectLength_10b   ((uint32_t)0x00000000)
 
#define USART_LINBreakDetectLength_11b   USART_CR2_LBDL
 
#define USART_Mode_Rx   USART_CR1_RE
 
#define USART_Mode_Tx   USART_CR1_TE
 
#define USART_OVRDetection_Disable   USART_CR3_OVRDIS
 
#define USART_OVRDetection_Enable   ((uint32_t)0x00000000)
 
#define USART_Parity_Even   USART_CR1_PCE
 
#define USART_Parity_No   ((uint32_t)0x00000000)
 
#define USART_Parity_Odd   (USART_CR1_PCE | USART_CR1_PS)
 
#define USART_Request_ABRRQ   USART_RQR_ABRRQ
 
#define USART_Request_MMRQ   USART_RQR_MMRQ
 
#define USART_Request_RXFRQ   USART_RQR_RXFRQ
 
#define USART_Request_SBKRQ   USART_RQR_SBKRQ
 
#define USART_Request_TXFRQ   USART_RQR_TXFRQ
 
#define USART_StopBits_1   ((uint32_t)0x00000000)
 
#define USART_StopBits_1_5   (USART_CR2_STOP_0 | USART_CR2_STOP_1)
 
#define USART_StopBits_2   USART_CR2_STOP_1
 
#define USART_WakeUp_AddressMark   USART_CR1_WAKE
 
#define USART_WakeUp_IdleLine   ((uint32_t)0x00000000)
 
#define USART_WakeUpSource_AddressMatch   ((uint32_t)0x00000000)
 
#define USART_WakeUpSource_RXNE   (uint32_t)(USART_CR3_WUS_0 | USART_CR3_WUS_1)
 
#define USART_WakeUpSource_StartBit   USART_CR3_WUS_1
 
#define USART_WordLength_8b   ((uint32_t)0x00000000)
 
#define USART_WordLength_9b   USART_CR1_M
 

Functions

void USART_AddressDetectionConfig (USART_TypeDef *USARTx, uint32_t USART_AddressLength)
 Configure the the USART Address detection length. More...
 
void USART_AutoBaudRateCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the Auto Baud Rate. More...
 
void USART_AutoBaudRateConfig (USART_TypeDef *USARTx, uint32_t USART_AutoBaudRate)
 Selects the USART auto baud rate method. More...
 
void USART_ClearFlag (USART_TypeDef *USARTx, uint32_t USART_FLAG)
 Clears the USARTx's pending flags. More...
 
void USART_ClearITPendingBit (USART_TypeDef *USARTx, uint32_t USART_IT)
 Clears the USARTx's interrupt pending bits. More...
 
void USART_ClockInit (USART_TypeDef *USARTx, USART_ClockInitTypeDef *USART_ClockInitStruct)
 Initializes the USARTx peripheral Clock according to the specified parameters in the USART_ClockInitStruct. More...
 
void USART_ClockStructInit (USART_ClockInitTypeDef *USART_ClockInitStruct)
 Fills each USART_ClockInitStruct member with its default value. More...
 
void USART_Cmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the specified USART peripheral. More...
 
void USART_DataInvCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the binary data inversion. More...
 
void USART_DECmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's DE functionality. More...
 
void USART_DeInit (USART_TypeDef *USARTx)
 Deinitializes the USARTx peripheral registers to their default reset values. More...
 
void USART_DEPolarityConfig (USART_TypeDef *USARTx, uint32_t USART_DEPolarity)
 Configures the USART's DE polarity. More...
 
void USART_DirectionModeCmd (USART_TypeDef *USARTx, uint32_t USART_DirectionMode, FunctionalState NewState)
 Enables or disables the USART's transmitter or receiver. More...
 
void USART_DMACmd (USART_TypeDef *USARTx, uint32_t USART_DMAReq, FunctionalState NewState)
 Enables or disables the USART's DMA interface. More...
 
void USART_DMAReceptionErrorConfig (USART_TypeDef *USARTx, uint32_t USART_DMAOnError)
 Enables or disables the USART's DMA interface when reception error occurs. More...
 
FlagStatus USART_GetFlagStatus (USART_TypeDef *USARTx, uint32_t USART_FLAG)
 Checks whether the specified USART flag is set or not. More...
 
ITStatus USART_GetITStatus (USART_TypeDef *USARTx, uint32_t USART_IT)
 Checks whether the specified USART interrupt has occurred or not. More...
 
void USART_HalfDuplexCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's Half Duplex communication. More...
 
void USART_Init (USART_TypeDef *USARTx, USART_InitTypeDef *USART_InitStruct)
 Initializes the USARTx peripheral according to the specified parameters in the USART_InitStruct . More...
 
void USART_InvPinCmd (USART_TypeDef *USARTx, uint32_t USART_InvPin, FunctionalState NewState)
 Enables or disables the Pin(s) active level inversion. More...
 
void USART_IrDACmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's IrDA interface. More...
 
void USART_IrDAConfig (USART_TypeDef *USARTx, uint32_t USART_IrDAMode)
 Configures the USART's IrDA interface. More...
 
void USART_ITConfig (USART_TypeDef *USARTx, uint32_t USART_IT, FunctionalState NewState)
 Enables or disables the specified USART interrupts. More...
 
void USART_LINBreakDetectLengthConfig (USART_TypeDef *USARTx, uint32_t USART_LINBreakDetectLength)
 Sets the USART LIN Break detection length. More...
 
void USART_LINCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's LIN mode. More...
 
void USART_MSBFirstCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's most significant bit first transmitted/received following the start bit. More...
 
void USART_MuteModeCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's mute mode. More...
 
void USART_MuteModeWakeUpConfig (USART_TypeDef *USARTx, uint32_t USART_WakeUp)
 Selects the USART WakeUp method from mute mode. More...
 
void USART_OneBitMethodCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's one bit sampling method. More...
 
void USART_OverrunDetectionConfig (USART_TypeDef *USARTx, uint32_t USART_OVRDetection)
 Enables or disables the USART's Overrun detection. More...
 
void USART_OverSampling8Cmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's 8x oversampling mode. More...
 
uint16_t USART_ReceiveData (USART_TypeDef *USARTx)
 Returns the most recent received data by the USARTx peripheral. More...
 
void USART_ReceiverTimeOutCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the receiver Time Out feature. More...
 
void USART_RequestCmd (USART_TypeDef *USARTx, uint32_t USART_Request, FunctionalState NewState)
 Enables the specified USART's Request. More...
 
void USART_SendData (USART_TypeDef *USARTx, uint16_t Data)
 Transmits single data through the USARTx peripheral. More...
 
void USART_SetAddress (USART_TypeDef *USARTx, uint8_t USART_Address)
 Sets the address of the USART node. More...
 
void USART_SetAutoRetryCount (USART_TypeDef *USARTx, uint8_t USART_AutoCount)
 Sets the Smart Card number of retries in transmit and receive. More...
 
void USART_SetBlockLength (USART_TypeDef *USARTx, uint8_t USART_BlockLength)
 Sets the Smart Card Block length. More...
 
void USART_SetDEAssertionTime (USART_TypeDef *USARTx, uint32_t USART_DEAssertionTime)
 Sets the specified RS485 DE assertion time. More...
 
void USART_SetDEDeassertionTime (USART_TypeDef *USARTx, uint32_t USART_DEDeassertionTime)
 Sets the specified RS485 DE deassertion time. More...
 
void USART_SetGuardTime (USART_TypeDef *USARTx, uint8_t USART_GuardTime)
 Sets the specified USART guard time. More...
 
void USART_SetPrescaler (USART_TypeDef *USARTx, uint8_t USART_Prescaler)
 Sets the system clock prescaler. More...
 
void USART_SetReceiverTimeOut (USART_TypeDef *USARTx, uint32_t USART_ReceiverTimeOut)
 Sets the receiver Time Out value. More...
 
void USART_SmartCardCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the USART's Smart Card mode. More...
 
void USART_SmartCardNACKCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables NACK transmission. More...
 
void USART_STOPModeCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the specified USART peripheral in STOP Mode. More...
 
void USART_StopModeWakeUpSourceConfig (USART_TypeDef *USARTx, uint32_t USART_WakeUpSource)
 Selects the USART WakeUp method form stop mode. More...
 
void USART_StructInit (USART_InitTypeDef *USART_InitStruct)
 Fills each USART_InitStruct member with its default value. More...
 
void USART_SWAPPinCmd (USART_TypeDef *USARTx, FunctionalState NewState)
 Enables or disables the swap Tx/Rx pins. More...
 

Detailed Description

This file contains all the functions prototypes for the USART firmware library.

Author
MCD Application Team
Version
V1.1.1
Date
04-April-2014
Attention

© COPYRIGHT 2014 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file stm32f30x_usart.h.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:21