Macros | Functions | Variables
stm32f30x_rcc.c File Reference

This file provides firmware functions to manage the following functionalities of the Reset and clock control (RCC) peripheral: More...

#include "stm32f30x_rcc.h"
Include dependency graph for stm32f30x_rcc.c:

Go to the source code of this file.

Macros

#define BDCR_BDRST_BB   (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
 
#define BDCR_OFFSET   (RCC_OFFSET + 0x20)
 
#define BDCR_RTCEN_BB   (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
 
#define BDRST_BitNumber   0x10
 
#define CFGR_BYTE3_ADDRESS   ((uint32_t)0x40021007)
 
#define CFGR_I2SSRC_BB   (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (I2SSRC_BitNumber * 4))
 
#define CFGR_OFFSET   (RCC_OFFSET + 0x04)
 
#define CFGR_USBPRE_BB   (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4))
 
#define CIR_BYTE2_ADDRESS   ((uint32_t)0x40021009)
 
#define CIR_BYTE3_ADDRESS   ((uint32_t)0x4002100A)
 
#define CR_BYTE2_ADDRESS   ((uint32_t)0x40021002)
 
#define CR_CSSON_BB   (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4))
 
#define CR_HSION_BB   (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4))
 
#define CR_OFFSET   (RCC_OFFSET + 0x00)
 
#define CR_PLLON_BB   (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4))
 
#define CSR_LSION_BB   (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4))
 
#define CSR_OFFSET   (RCC_OFFSET + 0x24)
 
#define CSSON_BitNumber   0x13
 
#define FLAG_MASK   ((uint8_t)0x1F)
 
#define HSION_BitNumber   0x00
 
#define I2SSRC_BitNumber   0x17
 
#define LSION_BitNumber   0x00
 
#define PLLON_BitNumber   0x18
 
#define RCC_OFFSET   (RCC_BASE - PERIPH_BASE)
 
#define RTCEN_BitNumber   0x0F
 
#define USBPRE_BitNumber   0x16
 

Functions

void RCC_ADCCLKConfig (uint32_t RCC_PLLCLK)
 Configures the ADC clock (ADCCLK). More...
 
void RCC_AdjustHSICalibrationValue (uint8_t HSICalibrationValue)
 Adjusts the Internal High Speed oscillator (HSI) calibration value. More...
 
void RCC_AHBPeriphClockCmd (uint32_t RCC_AHBPeriph, FunctionalState NewState)
 Enables or disables the AHB peripheral clock. More...
 
void RCC_AHBPeriphResetCmd (uint32_t RCC_AHBPeriph, FunctionalState NewState)
 Forces or releases AHB peripheral reset. More...
 
void RCC_APB1PeriphClockCmd (uint32_t RCC_APB1Periph, FunctionalState NewState)
 Enables or disables the Low Speed APB (APB1) peripheral clock. More...
 
void RCC_APB1PeriphResetCmd (uint32_t RCC_APB1Periph, FunctionalState NewState)
 Forces or releases Low Speed APB (APB1) peripheral reset. More...
 
void RCC_APB2PeriphClockCmd (uint32_t RCC_APB2Periph, FunctionalState NewState)
 Enables or disables the High Speed APB (APB2) peripheral clock. More...
 
void RCC_APB2PeriphResetCmd (uint32_t RCC_APB2Periph, FunctionalState NewState)
 Forces or releases High Speed APB (APB2) peripheral reset. More...
 
void RCC_BackupResetCmd (FunctionalState NewState)
 Forces or releases the Backup domain reset. More...
 
void RCC_ClearFlag (void)
 Clears the RCC reset flags. The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST. More...
 
void RCC_ClearITPendingBit (uint8_t RCC_IT)
 Clears the RCC's interrupt pending bits. More...
 
void RCC_ClockSecuritySystemCmd (FunctionalState NewState)
 Enables or disables the Clock Security System. More...
 
void RCC_DeInit (void)
 Resets the RCC clock configuration to the default reset state. More...
 
void RCC_GetClocksFreq (RCC_ClocksTypeDef *RCC_Clocks)
 Returns the frequencies of different on chip clocks; SYSCLK, HCLK, PCLK1 and PCLK2. More...
 
FlagStatus RCC_GetFlagStatus (uint8_t RCC_FLAG)
 Checks whether the specified RCC flag is set or not. More...
 
ITStatus RCC_GetITStatus (uint8_t RCC_IT)
 Checks whether the specified RCC interrupt has occurred or not. More...
 
uint8_t RCC_GetSYSCLKSource (void)
 Returns the clock source used as system clock. More...
 
void RCC_HCLKConfig (uint32_t RCC_SYSCLK)
 Configures the AHB clock (HCLK). More...
 
void RCC_HRTIM1CLKConfig (uint32_t RCC_HRTIMCLK)
 Configures the HRTIM1 clock sources(HRTIM1CLK). More...
 
void RCC_HSEConfig (uint8_t RCC_HSE)
 Configures the External High Speed oscillator (HSE). More...
 
void RCC_HSICmd (FunctionalState NewState)
 Enables or disables the Internal High Speed oscillator (HSI). More...
 
void RCC_I2CCLKConfig (uint32_t RCC_I2CCLK)
 Configures the I2C clock (I2CCLK). More...
 
void RCC_I2SCLKConfig (uint32_t RCC_I2SCLKSource)
 Configures the I2S clock source (I2SCLK). More...
 
void RCC_ITConfig (uint8_t RCC_IT, FunctionalState NewState)
 Enables or disables the specified RCC interrupts. More...
 
void RCC_LSEConfig (uint32_t RCC_LSE)
 Configures the External Low Speed oscillator (LSE). More...
 
void RCC_LSEDriveConfig (uint32_t RCC_LSEDrive)
 Configures the External Low Speed oscillator (LSE) drive capability. More...
 
void RCC_LSICmd (FunctionalState NewState)
 Enables or disables the Internal Low Speed oscillator (LSI). More...
 
void RCC_MCOConfig (uint8_t RCC_MCOSource, uint32_t RCC_MCOPrescaler)
 Selects the clock source to output on MCO pin (PA8) and the corresponding prescsaler. More...
 
void RCC_PCLK1Config (uint32_t RCC_HCLK)
 Configures the Low Speed APB clock (PCLK1). More...
 
void RCC_PCLK2Config (uint32_t RCC_HCLK)
 Configures the High Speed APB clock (PCLK2). More...
 
void RCC_PLLCmd (FunctionalState NewState)
 Enables or disables the main PLL. More...
 
void RCC_PLLConfig (uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
 Configures the PLL clock source and multiplication factor. More...
 
void RCC_PREDIV1Config (uint32_t RCC_PREDIV1_Div)
 Configures the PREDIV1 division factor. More...
 
void RCC_RTCCLKCmd (FunctionalState NewState)
 Enables or disables the RTC clock. More...
 
void RCC_RTCCLKConfig (uint32_t RCC_RTCCLKSource)
 Configures the RTC clock (RTCCLK). More...
 
void RCC_SYSCLKConfig (uint32_t RCC_SYSCLKSource)
 Configures the system clock (SYSCLK). More...
 
void RCC_TIMCLKConfig (uint32_t RCC_TIMCLK)
 Configures the TIMx clock sources(TIMCLK). More...
 
void RCC_USARTCLKConfig (uint32_t RCC_USARTCLK)
 Configures the USART clock (USARTCLK). More...
 
void RCC_USBCLKConfig (uint32_t RCC_USBCLKSource)
 Configures the USB clock (USBCLK). More...
 
ErrorStatus RCC_WaitForHSEStartUp (void)
 Waits for HSE start-up. More...
 

Variables

static __I uint16_t ADCPrescTable [16] = {1, 2, 4, 6, 8, 10, 12, 16, 32, 64, 128, 256, 0, 0, 0, 0 }
 
static __I uint8_t APBAHBPrescTable [16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}
 

Detailed Description

This file provides firmware functions to manage the following functionalities of the Reset and clock control (RCC) peripheral:

Author
MCD Application Team
Version
V1.1.1
Date
04-April-2014
  • Internal/external clocks, PLL, CSS and MCO configuration
  • System, AHB and APB busses clocks configuration
  • Peripheral clocks configuration
  • Interrupts and flags management
===============================================================================
                     ##### RCC specific features #####
===============================================================================
   [..] After reset the device is running from HSI (8 MHz) with Flash 0 WS, 
        all peripherals are off except internal SRAM, Flash and SWD.
        (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
            all peripherals mapped on these busses are running at HSI speed.
         (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
        (+) All GPIOs are in input floating state, except the SWD pins which
            are assigned to be used for debug purpose.
   [..] Once the device starts from reset, the user application has to:        
        (+) Configure the clock source to be used to drive the System clock
            (if the application needs higher frequency/performance).
        (+) Configure the System clock frequency and Flash settings.  
        (+) Configure the AHB and APB busses prescalers.
        (+) Enable the clock for the peripheral(s) to be used.
        (+) Configure the clock source(s) for peripherals which clocks are not
            derived from the System clock (ADC, TIM, I2C, USART, RTC and IWDG).      
Attention

© COPYRIGHT 2014 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file stm32f30x_rcc.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:21