Macros | Functions
stm32f30x_dbgmcu.h File Reference

This file contains all the functions prototypes for the DBGMCU firmware library. More...

#include "stm32f30x.h"
Include dependency graph for stm32f30x_dbgmcu.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

#define DBGMCU_CAN1_STOP   ((uint32_t)0x02000000)
 
#define DBGMCU_I2C1_SMBUS_TIMEOUT   ((uint32_t)0x00200000)
 
#define DBGMCU_I2C2_SMBUS_TIMEOUT   ((uint32_t)0x00400000)
 
#define DBGMCU_IWDG_STOP   ((uint32_t)0x00001000)
 
#define DBGMCU_RTC_STOP   ((uint32_t)0x00000400)
 
#define DBGMCU_SLEEP   ((uint32_t)0x00000001)
 
#define DBGMCU_STANDBY   ((uint32_t)0x00000004)
 
#define DBGMCU_STOP   ((uint32_t)0x00000002)
 
#define DBGMCU_TIM15_STOP   ((uint32_t)0x00000004)
 
#define DBGMCU_TIM16_STOP   ((uint32_t)0x00000008)
 
#define DBGMCU_TIM17_STOP   ((uint32_t)0x00000010)
 
#define DBGMCU_TIM1_STOP   ((uint32_t)0x00000001)
 
#define DBGMCU_TIM2_STOP   ((uint32_t)0x00000001)
 
#define DBGMCU_TIM3_STOP   ((uint32_t)0x00000002)
 
#define DBGMCU_TIM4_STOP   ((uint32_t)0x00000004)
 
#define DBGMCU_TIM6_STOP   ((uint32_t)0x00000010)
 
#define DBGMCU_TIM7_STOP   ((uint32_t)0x00000020)
 
#define DBGMCU_TIM8_STOP   ((uint32_t)0x00000002)
 
#define DBGMCU_WWDG_STOP   ((uint32_t)0x00000800)
 
#define IS_DBGMCU_APB1PERIPH(PERIPH)   ((((PERIPH) & 0xFD9FE3C8) == 0x00) && ((PERIPH) != 0x00))
 
#define IS_DBGMCU_APB2PERIPH(PERIPH)   ((((PERIPH) & 0xFFFFFFE0) == 0x00) && ((PERIPH) != 0x00))
 
#define IS_DBGMCU_PERIPH(PERIPH)   ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
 

Functions

void DBGMCU_APB1PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB1 peripheral behavior when the MCU is in Debug mode. More...
 
void DBGMCU_APB2PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB2 peripheral behavior when the MCU is in Debug mode. More...
 
void DBGMCU_Config (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures the specified peripheral and low power mode behavior when the MCU under Debug mode. More...
 
uint32_t DBGMCU_GetDEVID (void)
 Returns the device identifier. More...
 
uint32_t DBGMCU_GetREVID (void)
 Returns the device revision identifier. More...
 

Detailed Description

This file contains all the functions prototypes for the DBGMCU firmware library.

Author
MCD Application Team
Version
V1.1.1
Date
04-April-2014
Attention

© COPYRIGHT 2014 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file stm32f30x_dbgmcu.h.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Apr 15 2021 05:07:52