stm32f10x_dbgmcu.h
Go to the documentation of this file.
1 
23 /* Define to prevent recursive inclusion -------------------------------------*/
24 #ifndef __STM32F10x_DBGMCU_H
25 #define __STM32F10x_DBGMCU_H
26 
27 #ifdef __cplusplus
28  extern "C" {
29 #endif
30 
31 /* Includes ------------------------------------------------------------------*/
32 #include "stm32f10x.h"
33 
54 #define DBGMCU_SLEEP ((uint32_t)0x00000001)
55 #define DBGMCU_STOP ((uint32_t)0x00000002)
56 #define DBGMCU_STANDBY ((uint32_t)0x00000004)
57 #define DBGMCU_IWDG_STOP ((uint32_t)0x00000100)
58 #define DBGMCU_WWDG_STOP ((uint32_t)0x00000200)
59 #define DBGMCU_TIM1_STOP ((uint32_t)0x00000400)
60 #define DBGMCU_TIM2_STOP ((uint32_t)0x00000800)
61 #define DBGMCU_TIM3_STOP ((uint32_t)0x00001000)
62 #define DBGMCU_TIM4_STOP ((uint32_t)0x00002000)
63 #define DBGMCU_CAN1_STOP ((uint32_t)0x00004000)
64 #define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000)
65 #define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000)
66 #define DBGMCU_TIM8_STOP ((uint32_t)0x00020000)
67 #define DBGMCU_TIM5_STOP ((uint32_t)0x00040000)
68 #define DBGMCU_TIM6_STOP ((uint32_t)0x00080000)
69 #define DBGMCU_TIM7_STOP ((uint32_t)0x00100000)
70 #define DBGMCU_CAN2_STOP ((uint32_t)0x00200000)
71 #define DBGMCU_TIM15_STOP ((uint32_t)0x00400000)
72 #define DBGMCU_TIM16_STOP ((uint32_t)0x00800000)
73 #define DBGMCU_TIM17_STOP ((uint32_t)0x01000000)
74 #define DBGMCU_TIM12_STOP ((uint32_t)0x02000000)
75 #define DBGMCU_TIM13_STOP ((uint32_t)0x04000000)
76 #define DBGMCU_TIM14_STOP ((uint32_t)0x08000000)
77 #define DBGMCU_TIM9_STOP ((uint32_t)0x10000000)
78 #define DBGMCU_TIM10_STOP ((uint32_t)0x20000000)
79 #define DBGMCU_TIM11_STOP ((uint32_t)0x40000000)
80 
81 #define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
82 
98 uint32_t DBGMCU_GetREVID(void);
99 uint32_t DBGMCU_GetDEVID(void);
100 void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
101 
102 #ifdef __cplusplus
103 }
104 #endif
105 
106 #endif /* __STM32F10x_DBGMCU_H */
107 
119 /******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
FunctionalState
Definition: stm32f4xx.h:708
uint32_t DBGMCU_GetREVID(void)
Returns the device revision identifier.
CMSIS Cortex-M3 Device Peripheral Access Layer Header File. This file contains all the peripheral reg...
uint32_t DBGMCU_GetDEVID(void)
Returns the device identifier.
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
Configures low power mode behavior when the MCU is in Debug mode.


rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:19