Modules | Functions
Collaboration diagram for TIM_Private_Functions:

Modules

 TimeBase management functions
 TimeBase management functions.
 
 Output Compare management functions
 Output Compare management functions.
 
 Input Capture management functions
 Input Capture management functions.
 
 Advanced-control timers (TIM1 and TIM8) specific features
 Advanced-control timers (TIM1 and TIM8) specific features.
 
 Interrupts DMA and flags management functions
 Interrupts, DMA and flags management functions.
 
 Clocks management functions
 Clocks management functions.
 
 Synchronization management functions
 Synchronization management functions.
 
 Specific interface management functions
 Specific interface management functions.
 
 Specific remapping management function
 Specific remapping management function.
 

Functions

static void TI1_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI1 as Input. More...
 
static void TI2_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI2 as Input. More...
 
static void TI3_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI3 as Input. More...
 
static void TI4_Config (TIM_TypeDef *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI4 as Input. More...
 
void TIM_ARRPreloadConfig (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables TIMx peripheral Preload register on ARR. More...
 
void TIM_BDTRConfig (TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
 Configures the: Break feature, dead time, Lock level, the OSSI, the OSSR State and the AOE(automatic output enable). More...
 
void TIM_BDTRStructInit (TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
 Fills each TIM_BDTRInitStruct member with its default value. More...
 
void TIM_CCPreloadControl (TIM_TypeDef *TIMx, FunctionalState NewState)
 Sets or Resets the TIM peripheral Capture Compare Preload Control bit. More...
 
void TIM_CCxCmd (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
 Enables or disables the TIM Capture Compare Channel x. More...
 
void TIM_CCxNCmd (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
 Enables or disables the TIM Capture Compare Channel xN. More...
 
void TIM_ClearFlag (TIM_TypeDef *TIMx, uint16_t TIM_FLAG)
 Clears the TIMx's pending flags. More...
 
void TIM_ClearITPendingBit (TIM_TypeDef *TIMx, uint16_t TIM_IT)
 Clears the TIMx's interrupt pending bits. More...
 
void TIM_ClearOC1Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF1 signal on an external event. More...
 
void TIM_ClearOC2Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF2 signal on an external event. More...
 
void TIM_ClearOC3Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF3 signal on an external event. More...
 
void TIM_ClearOC4Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
 Clears or safeguards the OCREF4 signal on an external event. More...
 
void TIM_Cmd (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the specified TIM peripheral. More...
 
void TIM_CounterModeConfig (TIM_TypeDef *TIMx, uint16_t TIM_CounterMode)
 Specifies the TIMx Counter Mode to be used. More...
 
void TIM_CtrlPWMOutputs (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIM peripheral Main Outputs. More...
 
void TIM_DeInit (TIM_TypeDef *TIMx)
 Deinitializes the TIMx peripheral registers to their default reset values. More...
 
void TIM_DMACmd (TIM_TypeDef *TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
 Enables or disables the TIMx's DMA Requests. More...
 
void TIM_DMAConfig (TIM_TypeDef *TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
 Configures the TIMx's DMA interface. More...
 
void TIM_EncoderInterfaceConfig (TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode, uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
 Configures the TIMx Encoder Interface. More...
 
void TIM_ETRClockMode1Config (TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
 Configures the External clock Mode1. More...
 
void TIM_ETRClockMode2Config (TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
 Configures the External clock Mode2. More...
 
void TIM_ETRConfig (TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
 Configures the TIMx External Trigger (ETR). More...
 
void TIM_ForcedOC1Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 1 waveform to active or inactive level. More...
 
void TIM_ForcedOC2Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 2 waveform to active or inactive level. More...
 
void TIM_ForcedOC3Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 3 waveform to active or inactive level. More...
 
void TIM_ForcedOC4Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
 Forces the TIMx output 4 waveform to active or inactive level. More...
 
void TIM_GenerateEvent (TIM_TypeDef *TIMx, uint16_t TIM_EventSource)
 Configures the TIMx event to be generate by software. More...
 
uint16_t TIM_GetCapture1 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 1 value. More...
 
uint16_t TIM_GetCapture2 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 2 value. More...
 
uint16_t TIM_GetCapture3 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 3 value. More...
 
uint16_t TIM_GetCapture4 (TIM_TypeDef *TIMx)
 Gets the TIMx Input Capture 4 value. More...
 
uint16_t TIM_GetCounter (TIM_TypeDef *TIMx)
 Gets the TIMx Counter value. More...
 
FlagStatus TIM_GetFlagStatus (TIM_TypeDef *TIMx, uint16_t TIM_FLAG)
 Checks whether the specified TIM flag is set or not. More...
 
ITStatus TIM_GetITStatus (TIM_TypeDef *TIMx, uint16_t TIM_IT)
 Checks whether the TIM interrupt has occurred or not. More...
 
uint16_t TIM_GetPrescaler (TIM_TypeDef *TIMx)
 Gets the TIMx Prescaler value. More...
 
void TIM_ICInit (TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct)
 Initializes the TIM peripheral according to the specified parameters in the TIM_ICInitStruct. More...
 
void TIM_ICStructInit (TIM_ICInitTypeDef *TIM_ICInitStruct)
 Fills each TIM_ICInitStruct member with its default value. More...
 
void TIM_InternalClockConfig (TIM_TypeDef *TIMx)
 Configures the TIMx internal Clock. More...
 
void TIM_ITConfig (TIM_TypeDef *TIMx, uint16_t TIM_IT, FunctionalState NewState)
 Enables or disables the specified TIM interrupts. More...
 
void TIM_ITRxExternalClockConfig (TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource)
 Configures the TIMx Internal Trigger as External Clock. More...
 
void TIM_OC1FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 1 Fast feature. More...
 
void TIM_OC1Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel1 according to the specified parameters in the TIM_OCInitStruct. More...
 
void TIM_OC1NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
 Configures the TIMx Channel 1N polarity. More...
 
void TIM_OC1PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 1 polarity. More...
 
void TIM_OC1PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR1. More...
 
void TIM_OC2FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 2 Fast feature. More...
 
void TIM_OC2Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel2 according to the specified parameters in the TIM_OCInitStruct. More...
 
void TIM_OC2NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
 Configures the TIMx Channel 2N polarity. More...
 
void TIM_OC2PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 2 polarity. More...
 
void TIM_OC2PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR2. More...
 
void TIM_OC3FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 3 Fast feature. More...
 
void TIM_OC3Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel3 according to the specified parameters in the TIM_OCInitStruct. More...
 
void TIM_OC3NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
 Configures the TIMx Channel 3N polarity. More...
 
void TIM_OC3PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 3 polarity. More...
 
void TIM_OC3PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR3. More...
 
void TIM_OC4FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
 Configures the TIMx Output Compare 4 Fast feature. More...
 
void TIM_OC4Init (TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct)
 Initializes the TIMx Channel4 according to the specified parameters in the TIM_OCInitStruct. More...
 
void TIM_OC4PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
 Configures the TIMx channel 4 polarity. More...
 
void TIM_OC4PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
 Enables or disables the TIMx peripheral Preload register on CCR4. More...
 
void TIM_OCStructInit (TIM_OCInitTypeDef *TIM_OCInitStruct)
 Fills each TIM_OCInitStruct member with its default value. More...
 
void TIM_PrescalerConfig (TIM_TypeDef *TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
 Configures the TIMx Prescaler. More...
 
void TIM_PWMIConfig (TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct)
 Configures the TIM peripheral according to the specified parameters in the TIM_ICInitStruct to measure an external PWM signal. More...
 
void TIM_SelectCCDMA (TIM_TypeDef *TIMx, FunctionalState NewState)
 Selects the TIMx peripheral Capture Compare DMA source. More...
 
void TIM_SelectCOM (TIM_TypeDef *TIMx, FunctionalState NewState)
 Selects the TIM peripheral Commutation event. More...
 
void TIM_SelectHallSensor (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIMx's Hall sensor interface. More...
 
void TIM_SelectInputTrigger (TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource)
 Selects the Input Trigger source. More...
 
void TIM_SelectMasterSlaveMode (TIM_TypeDef *TIMx, uint16_t TIM_MasterSlaveMode)
 Sets or Resets the TIMx Master/Slave Mode. More...
 
void TIM_SelectOCxM (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
 Selects the TIM Output Compare Mode. More...
 
void TIM_SelectOnePulseMode (TIM_TypeDef *TIMx, uint16_t TIM_OPMode)
 Selects the TIMx's One Pulse Mode. More...
 
void TIM_SelectOutputTrigger (TIM_TypeDef *TIMx, uint16_t TIM_TRGOSource)
 Selects the TIMx Trigger Output Mode. More...
 
void TIM_SelectSlaveMode (TIM_TypeDef *TIMx, uint16_t TIM_SlaveMode)
 Selects the TIMx Slave Mode. More...
 
void TIM_SetAutoreload (TIM_TypeDef *TIMx, uint16_t Autoreload)
 Sets the TIMx Autoreload Register value. More...
 
void TIM_SetClockDivision (TIM_TypeDef *TIMx, uint16_t TIM_CKD)
 Sets the TIMx Clock Division value. More...
 
void TIM_SetCompare1 (TIM_TypeDef *TIMx, uint16_t Compare1)
 Sets the TIMx Capture Compare1 Register value. More...
 
void TIM_SetCompare2 (TIM_TypeDef *TIMx, uint16_t Compare2)
 Sets the TIMx Capture Compare2 Register value. More...
 
void TIM_SetCompare3 (TIM_TypeDef *TIMx, uint16_t Compare3)
 Sets the TIMx Capture Compare3 Register value. More...
 
void TIM_SetCompare4 (TIM_TypeDef *TIMx, uint16_t Compare4)
 Sets the TIMx Capture Compare4 Register value. More...
 
void TIM_SetCounter (TIM_TypeDef *TIMx, uint16_t Counter)
 Sets the TIMx Counter Register value. More...
 
void TIM_SetIC1Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 1 prescaler. More...
 
void TIM_SetIC2Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 2 prescaler. More...
 
void TIM_SetIC3Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 3 prescaler. More...
 
void TIM_SetIC4Prescaler (TIM_TypeDef *TIMx, uint16_t TIM_ICPSC)
 Sets the TIMx Input Capture 4 prescaler. More...
 
void TIM_TimeBaseInit (TIM_TypeDef *TIMx, TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct)
 Initializes the TIMx Time Base Unit peripheral according to the specified parameters in the TIM_TimeBaseInitStruct. More...
 
void TIM_TimeBaseStructInit (TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct)
 Fills each TIM_TimeBaseInitStruct member with its default value. More...
 
void TIM_TIxExternalClockConfig (TIM_TypeDef *TIMx, uint16_t TIM_TIxExternalCLKSource, uint16_t TIM_ICPolarity, uint16_t ICFilter)
 Configures the TIMx Trigger as External Clock. More...
 
void TIM_UpdateDisableConfig (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or Disables the TIMx Update event. More...
 
void TIM_UpdateRequestConfig (TIM_TypeDef *TIMx, uint16_t TIM_UpdateSource)
 Configures the TIMx Update Request Interrupt source. More...
 

Detailed Description

Function Documentation

static void TI1_Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
)
static

Configure the TI1 as Input.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:
  • TIM_ICPolarity_Rising
  • TIM_ICPolarity_Falling
  • TIM_ICPolarity_BothEdge
TIM_ICSelectionspecifies the input to be used. This parameter can be one of the following values:
  • TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
  • TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
  • TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
TIM_ICFilterSpecifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values
None

Definition at line 3834 of file stm32f30x_tim.c.

static void TI2_Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
)
static

Configure the TI2 as Input.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:
  • TIM_ICPolarity_Rising
  • TIM_ICPolarity_Falling
  • TIM_ICPolarity_BothEdge
TIM_ICSelectionspecifies the input to be used. This parameter can be one of the following values:
  • TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
  • TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
  • TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
TIM_ICFilterSpecifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values
None

Definition at line 3875 of file stm32f30x_tim.c.

static void TI3_Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
)
static

Configure the TI3 as Input.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:
  • TIM_ICPolarity_Rising
  • TIM_ICPolarity_Falling
  • TIM_ICPolarity_BothEdge
TIM_ICSelectionspecifies the input to be used. This parameter can be one of the following values:
  • TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
  • TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
  • TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
TIM_ICFilterSpecifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values
None

Definition at line 3917 of file stm32f30x_tim.c.

static void TI4_Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
)
static

Configure the TI4 as Input.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:
  • TIM_ICPolarity_Rising
  • TIM_ICPolarity_Falling
  • TIM_ICPolarity_BothEdge
TIM_ICSelectionspecifies the input to be used. This parameter can be one of the following values:
  • TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
  • TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
  • TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
TIM_ICFilterSpecifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values
None

Definition at line 3958 of file stm32f30x_tim.c.

void TIM_ARRPreloadConfig ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables TIMx peripheral Preload register on ARR.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
NewStatenew state of the TIMx peripheral Preload register This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1409 of file stm32f10x_tim.c.

void TIM_BDTRConfig ( TIM_TypeDef TIMx,
TIM_BDTRInitTypeDef TIM_BDTRInitStruct 
)

Configures the: Break feature, dead time, Lock level, the OSSI, the OSSR State and the AOE(automatic output enable).

Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable).

Parameters
TIMxwhere x can be 1 or 8 to select the TIM
TIM_BDTRInitStructpointer to a TIM_BDTRInitTypeDef structure that contains the BDTR Register configuration information for the TIM peripheral.
Return values
None

Definition at line 712 of file stm32f10x_tim.c.

void TIM_BDTRStructInit ( TIM_BDTRInitTypeDef TIM_BDTRInitStruct)

Fills each TIM_BDTRInitStruct member with its default value.

Parameters
TIM_BDTRInitStructpointer to a TIM_BDTRInitTypeDef structure which will be initialized.
Return values
None

Definition at line 787 of file stm32f10x_tim.c.

void TIM_CCPreloadControl ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Sets or Resets the TIM peripheral Capture Compare Preload Control bit.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8 or 15 to select the TIMx peripheral
NewStatenew state of the Capture Compare Preload Control bit This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1483 of file stm32f10x_tim.c.

void TIM_CCxCmd ( TIM_TypeDef TIMx,
uint16_t  TIM_Channel,
uint16_t  TIM_CCx 
)

Enables or disables the TIM Capture Compare Channel x.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_Channelspecifies the TIM Channel This parameter can be one of the following values:
  • TIM_Channel_1: TIM Channel 1
  • TIM_Channel_2: TIM Channel 2
  • TIM_Channel_3: TIM Channel 3
  • TIM_Channel_4: TIM Channel 4
TIM_CCxspecifies the TIM Channel CCxE bit new state. This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.
Return values
None

Definition at line 1974 of file stm32f10x_tim.c.

void TIM_CCxNCmd ( TIM_TypeDef TIMx,
uint16_t  TIM_Channel,
uint16_t  TIM_CCxN 
)

Enables or disables the TIM Capture Compare Channel xN.

Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_Channelspecifies the TIM Channel This parameter can be one of the following values:
  • TIM_Channel_1: TIM Channel 1
  • TIM_Channel_2: TIM Channel 2
  • TIM_Channel_3: TIM Channel 3
TIM_CCxNspecifies the TIM Channel CCxNE bit new state. This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.
Return values
None

Definition at line 2004 of file stm32f10x_tim.c.

void TIM_ClearFlag ( TIM_TypeDef TIMx,
uint16_t  TIM_FLAG 
)

Clears the TIMx's pending flags.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_FLAGspecifies the flag bit to clear. This parameter can be any combination of the following values:
  • TIM_FLAG_Update: TIM update Flag
  • TIM_FLAG_CC1: TIM Capture Compare 1 Flag
  • TIM_FLAG_CC2: TIM Capture Compare 2 Flag
  • TIM_FLAG_CC3: TIM Capture Compare 3 Flag
  • TIM_FLAG_CC4: TIM Capture Compare 4 Flag
  • TIM_FLAG_COM: TIM Commutation Flag
  • TIM_FLAG_Trigger: TIM Trigger Flag
  • TIM_FLAG_Break: TIM Break Flag
  • TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
  • TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
  • TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
  • TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
Note
  • TIM6 and TIM7 can have only one update flag.
  • TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, TIM_FLAG_CC2 or TIM_FLAG_Trigger.
  • TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
  • TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
  • TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
Return values
None

Definition at line 2600 of file stm32f10x_tim.c.

void TIM_ClearITPendingBit ( TIM_TypeDef TIMx,
uint16_t  TIM_IT 
)

Clears the TIMx's interrupt pending bits.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_ITspecifies the pending bit to clear. This parameter can be any combination of the following values:
  • TIM_IT_Update: TIM1 update Interrupt source
  • TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
  • TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
  • TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
  • TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
  • TIM_IT_COM: TIM Commutation Interrupt source
  • TIM_IT_Trigger: TIM Trigger Interrupt source
  • TIM_IT_Break: TIM Break Interrupt source
Note
  • TIM6 and TIM7 can generate only an update interrupt.
  • TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger.
  • TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
  • TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
  • TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
Return values
None

Definition at line 2676 of file stm32f10x_tim.c.

void TIM_ClearOC1Ref ( TIM_TypeDef TIMx,
uint16_t  TIM_OCClear 
)

Clears or safeguards the OCREF1 signal on an external event.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCClearnew state of the Output Compare Clear Enable Bit. This parameter can be one of the following values:
  • TIM_OCClear_Enable: TIM Output clear enable
  • TIM_OCClear_Disable: TIM Output clear disable
Return values
None

Definition at line 1707 of file stm32f10x_tim.c.

void TIM_ClearOC2Ref ( TIM_TypeDef TIMx,
uint16_t  TIM_OCClear 
)

Clears or safeguards the OCREF2 signal on an external event.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCClearnew state of the Output Compare Clear Enable Bit. This parameter can be one of the following values:
  • TIM_OCClear_Enable: TIM Output clear enable
  • TIM_OCClear_Disable: TIM Output clear disable
Return values
None

Definition at line 1733 of file stm32f10x_tim.c.

void TIM_ClearOC3Ref ( TIM_TypeDef TIMx,
uint16_t  TIM_OCClear 
)

Clears or safeguards the OCREF3 signal on an external event.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCClearnew state of the Output Compare Clear Enable Bit. This parameter can be one of the following values:
  • TIM_OCClear_Enable: TIM Output clear enable
  • TIM_OCClear_Disable: TIM Output clear disable
Return values
None

Definition at line 1757 of file stm32f10x_tim.c.

void TIM_ClearOC4Ref ( TIM_TypeDef TIMx,
uint16_t  TIM_OCClear 
)

Clears or safeguards the OCREF4 signal on an external event.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCClearnew state of the Output Compare Clear Enable Bit. This parameter can be one of the following values:
  • TIM_OCClear_Enable: TIM Output clear enable
  • TIM_OCClear_Disable: TIM Output clear disable
Return values
None

Definition at line 1781 of file stm32f10x_tim.c.

void TIM_Cmd ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables the specified TIM peripheral.

Parameters
TIMxwhere x can be 1 to 17 to select the TIMx peripheral.
NewStatenew state of the TIMx peripheral. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 806 of file stm32f10x_tim.c.

void TIM_CounterModeConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_CounterMode 
)

Specifies the TIMx Counter Mode to be used.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_CounterModespecifies the Counter Mode to be used This parameter can be one of the following values:
  • TIM_CounterMode_Up: TIM Up Counting Mode
  • TIM_CounterMode_Down: TIM Down Counting Mode
  • TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
  • TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
  • TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
Return values
None

Definition at line 1199 of file stm32f10x_tim.c.

void TIM_CtrlPWMOutputs ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables the TIM peripheral Main Outputs.

Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral.
NewStatenew state of the TIM peripheral Main Outputs. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 831 of file stm32f10x_tim.c.

void TIM_DeInit ( TIM_TypeDef TIMx)

Deinitializes the TIMx peripheral registers to their default reset values.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
Return values
None

Definition at line 122 of file stm32f10x_tim.c.

void TIM_DMACmd ( TIM_TypeDef TIMx,
uint16_t  TIM_DMASource,
FunctionalState  NewState 
)

Enables or disables the TIMx's DMA Requests.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_DMASourcespecifies the DMA Request sources. This parameter can be any combination of the following values:
  • TIM_DMA_Update: TIM update Interrupt source
  • TIM_DMA_CC1: TIM Capture Compare 1 DMA source
  • TIM_DMA_CC2: TIM Capture Compare 2 DMA source
  • TIM_DMA_CC3: TIM Capture Compare 3 DMA source
  • TIM_DMA_CC4: TIM Capture Compare 4 DMA source
  • TIM_DMA_COM: TIM Commutation DMA source
  • TIM_DMA_Trigger: TIM Trigger DMA source
NewStatenew state of the DMA Request sources. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 964 of file stm32f10x_tim.c.

void TIM_DMAConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_DMABase,
uint16_t  TIM_DMABurstLength 
)

Configures the TIMx's DMA interface.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_DMABaseDMA Base address. This parameter can be one of the following values:
  • TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, TIM_DMABase_DCR.
TIM_DMABurstLengthDMA Burst length. This parameter can be one value between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
Return values
None

Definition at line 937 of file stm32f10x_tim.c.

void TIM_EncoderInterfaceConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_EncoderMode,
uint16_t  TIM_IC1Polarity,
uint16_t  TIM_IC2Polarity 
)

Configures the TIMx Encoder Interface.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_EncoderModespecifies the TIMx Encoder Mode. This parameter can be one of the following values:
  • TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
  • TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
  • TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
TIM_IC1Polarityspecifies the IC1 Polarity This parameter can be one of the following values:
  • TIM_ICPolarity_Falling: IC Falling edge.
  • TIM_ICPolarity_Rising: IC Rising edge.
TIM_IC2Polarityspecifies the IC2 Polarity This parameter can be one of the following values:
  • TIM_ICPolarity_Falling: IC Falling edge.
  • TIM_ICPolarity_Rising: IC Rising edge.
Return values
None

Definition at line 1264 of file stm32f10x_tim.c.

void TIM_ETRClockMode1Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ExtTRGPrescaler,
uint16_t  TIM_ExtTRGPolarity,
uint16_t  ExtTRGFilter 
)

Configures the External clock Mode1.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ExtTRGPrescalerThe external Trigger Prescaler. This parameter can be one of the following values:
  • TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
  • TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
  • TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
  • TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
TIM_ExtTRGPolarityThe external Trigger Polarity. This parameter can be one of the following values:
  • TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
  • TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
ExtTRGFilterExternal Trigger Filter. This parameter must be a value between 0x00 and 0x0F
Return values
None

Definition at line 1075 of file stm32f10x_tim.c.

void TIM_ETRClockMode2Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ExtTRGPrescaler,
uint16_t  TIM_ExtTRGPolarity,
uint16_t  ExtTRGFilter 
)

Configures the External clock Mode2.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ExtTRGPrescalerThe external Trigger Prescaler. This parameter can be one of the following values:
  • TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
  • TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
  • TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
  • TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
TIM_ExtTRGPolarityThe external Trigger Polarity. This parameter can be one of the following values:
  • TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
  • TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
ExtTRGFilterExternal Trigger Filter. This parameter must be a value between 0x00 and 0x0F
Return values
None

Definition at line 1117 of file stm32f10x_tim.c.

void TIM_ETRConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_ExtTRGPrescaler,
uint16_t  TIM_ExtTRGPolarity,
uint16_t  ExtTRGFilter 
)

Configures the TIMx External Trigger (ETR).

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ExtTRGPrescalerThe external Trigger Prescaler. This parameter can be one of the following values:
  • TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
  • TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
  • TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
  • TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
TIM_ExtTRGPolarityThe external Trigger Polarity. This parameter can be one of the following values:
  • TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
  • TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
ExtTRGFilterExternal Trigger Filter. This parameter must be a value between 0x00 and 0x0F
Return values
None

Definition at line 1148 of file stm32f10x_tim.c.

void TIM_ForcedOC1Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ForcedAction 
)

Forces the TIMx output 1 waveform to active or inactive level.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_ForcedActionspecifies the forced Action to be set to the output waveform. This parameter can be one of the following values:
  • TIM_ForcedAction_Active: Force active level on OC1REF
  • TIM_ForcedAction_InActive: Force inactive level on OC1REF.
Return values
None

Definition at line 1315 of file stm32f10x_tim.c.

void TIM_ForcedOC2Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ForcedAction 
)

Forces the TIMx output 2 waveform to active or inactive level.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_ForcedActionspecifies the forced Action to be set to the output waveform. This parameter can be one of the following values:
  • TIM_ForcedAction_Active: Force active level on OC2REF
  • TIM_ForcedAction_InActive: Force inactive level on OC2REF.
Return values
None

Definition at line 1339 of file stm32f10x_tim.c.

void TIM_ForcedOC3Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ForcedAction 
)

Forces the TIMx output 3 waveform to active or inactive level.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ForcedActionspecifies the forced Action to be set to the output waveform. This parameter can be one of the following values:
  • TIM_ForcedAction_Active: Force active level on OC3REF
  • TIM_ForcedAction_InActive: Force inactive level on OC3REF.
Return values
None

Definition at line 1363 of file stm32f10x_tim.c.

void TIM_ForcedOC4Config ( TIM_TypeDef TIMx,
uint16_t  TIM_ForcedAction 
)

Forces the TIMx output 4 waveform to active or inactive level.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ForcedActionspecifies the forced Action to be set to the output waveform. This parameter can be one of the following values:
  • TIM_ForcedAction_Active: Force active level on OC4REF
  • TIM_ForcedAction_InActive: Force inactive level on OC4REF.
Return values
None

Definition at line 1387 of file stm32f10x_tim.c.

void TIM_GenerateEvent ( TIM_TypeDef TIMx,
uint16_t  TIM_EventSource 
)

Configures the TIMx event to be generate by software.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_EventSourcespecifies the event source. This parameter can be one or more of the following values:
  • TIM_EventSource_Update: Timer update Event source
  • TIM_EventSource_CC1: Timer Capture Compare 1 Event source
  • TIM_EventSource_CC2: Timer Capture Compare 2 Event source
  • TIM_EventSource_CC3: Timer Capture Compare 3 Event source
  • TIM_EventSource_CC4: Timer Capture Compare 4 Event source
  • TIM_EventSource_COM: Timer COM event source
  • TIM_EventSource_Trigger: Timer Trigger Event source
  • TIM_EventSource_Break: Timer Break event source
Note
  • TIM6 and TIM7 can only generate an update event.
  • TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8.
Return values
None

Definition at line 909 of file stm32f10x_tim.c.

uint16_t TIM_GetCapture1 ( TIM_TypeDef TIMx)

Gets the TIMx Input Capture 1 value.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
Return values
CaptureCompare 1 Register value.

Definition at line 2457 of file stm32f10x_tim.c.

uint16_t TIM_GetCapture2 ( TIM_TypeDef TIMx)

Gets the TIMx Input Capture 2 value.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
Return values
CaptureCompare 2 Register value.

Definition at line 2470 of file stm32f10x_tim.c.

uint16_t TIM_GetCapture3 ( TIM_TypeDef TIMx)

Gets the TIMx Input Capture 3 value.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
Return values
CaptureCompare 3 Register value.

Definition at line 2483 of file stm32f10x_tim.c.

uint16_t TIM_GetCapture4 ( TIM_TypeDef TIMx)

Gets the TIMx Input Capture 4 value.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
Return values
CaptureCompare 4 Register value.

Definition at line 2496 of file stm32f10x_tim.c.

uint16_t TIM_GetCounter ( TIM_TypeDef TIMx)

Gets the TIMx Counter value.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
Return values
CounterRegister value.

Definition at line 2509 of file stm32f10x_tim.c.

FlagStatus TIM_GetFlagStatus ( TIM_TypeDef TIMx,
uint16_t  TIM_FLAG 
)

Checks whether the specified TIM flag is set or not.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_FLAGspecifies the flag to check. This parameter can be one of the following values:
  • TIM_FLAG_Update: TIM update Flag
  • TIM_FLAG_CC1: TIM Capture Compare 1 Flag
  • TIM_FLAG_CC2: TIM Capture Compare 2 Flag
  • TIM_FLAG_CC3: TIM Capture Compare 3 Flag
  • TIM_FLAG_CC4: TIM Capture Compare 4 Flag
  • TIM_FLAG_COM: TIM Commutation Flag
  • TIM_FLAG_Trigger: TIM Trigger Flag
  • TIM_FLAG_Break: TIM Break Flag
  • TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
  • TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
  • TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
  • TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
Note
  • TIM6 and TIM7 can have only one update flag.
  • TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, TIM_FLAG_CC2 or TIM_FLAG_Trigger.
  • TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
  • TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
  • TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
Return values
Thenew state of TIM_FLAG (SET or RESET).

Definition at line 2556 of file stm32f10x_tim.c.

ITStatus TIM_GetITStatus ( TIM_TypeDef TIMx,
uint16_t  TIM_IT 
)

Checks whether the TIM interrupt has occurred or not.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_ITspecifies the TIM interrupt source to check. This parameter can be one of the following values:
  • TIM_IT_Update: TIM update Interrupt source
  • TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
  • TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
  • TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
  • TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
  • TIM_IT_COM: TIM Commutation Interrupt source
  • TIM_IT_Trigger: TIM Trigger Interrupt source
  • TIM_IT_Break: TIM Break Interrupt source
Note
  • TIM6 and TIM7 can generate only an update interrupt.
  • TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger.
  • TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
  • TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
  • TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
Return values
Thenew state of the TIM_IT(SET or RESET).

Definition at line 2632 of file stm32f10x_tim.c.

uint16_t TIM_GetPrescaler ( TIM_TypeDef TIMx)

Gets the TIMx Prescaler value.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
Return values
PrescalerRegister value.

Definition at line 2522 of file stm32f10x_tim.c.

void TIM_ICInit ( TIM_TypeDef TIMx,
TIM_ICInitTypeDef TIM_ICInitStruct 
)

Initializes the TIM peripheral according to the specified parameters in the TIM_ICInitStruct.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_ICInitStructpointer to a TIM_ICInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 587 of file stm32f10x_tim.c.

void TIM_ICStructInit ( TIM_ICInitTypeDef TIM_ICInitStruct)

Fills each TIM_ICInitStruct member with its default value.

Parameters
TIM_ICInitStructpointer to a TIM_ICInitTypeDef structure which will be initialized.
Return values
None

Definition at line 771 of file stm32f10x_tim.c.

void TIM_InternalClockConfig ( TIM_TypeDef TIMx)

Configures the TIMx internal Clock.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
Return values
None

Definition at line 989 of file stm32f10x_tim.c.

void TIM_ITConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_IT,
FunctionalState  NewState 
)

Enables or disables the specified TIM interrupts.

Parameters
TIMxwhere x can be 1 to 17 to select the TIMx peripheral.
TIM_ITspecifies the TIM interrupts sources to be enabled or disabled. This parameter can be any combination of the following values:
  • TIM_IT_Update: TIM update Interrupt source
  • TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
  • TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
  • TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
  • TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
  • TIM_IT_COM: TIM Commutation Interrupt source
  • TIM_IT_Trigger: TIM Trigger Interrupt source
  • TIM_IT_Break: TIM Break Interrupt source
Note
  • TIM6 and TIM7 can only generate an update interrupt.
  • TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger.
  • TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
  • TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
  • TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
Parameters
NewStatenew state of the TIM interrupts. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 872 of file stm32f10x_tim.c.

void TIM_ITRxExternalClockConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_InputTriggerSource 
)

Configures the TIMx Internal Trigger as External Clock.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
TIM_ITRSourceTrigger source. This parameter can be one of the following values:
TIM_TS_ITR0Internal Trigger 0
TIM_TS_ITR1Internal Trigger 1
TIM_TS_ITR2Internal Trigger 2
TIM_TS_ITR3Internal Trigger 3
Return values
None

Definition at line 1008 of file stm32f10x_tim.c.

void TIM_OC1FastConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCFast 
)

Configures the TIMx Output Compare 1 Fast feature.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_OCFastnew state of the Output Compare Fast Enable Bit. This parameter can be one of the following values:
  • TIM_OCFast_Enable: TIM output compare fast enable
  • TIM_OCFast_Disable: TIM output compare fast disable
Return values
None

Definition at line 1606 of file stm32f10x_tim.c.

void TIM_OC1Init ( TIM_TypeDef TIMx,
TIM_OCInitTypeDef TIM_OCInitStruct 
)

Initializes the TIMx Channel1 according to the specified parameters in the TIM_OCInitStruct.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_OCInitStructpointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 279 of file stm32f10x_tim.c.

void TIM_OC1NPolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCNPolarity 
)

Configures the TIMx Channel 1N polarity.

Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCNPolarityspecifies the OC1N Polarity This parameter can be one of the following values:
  • TIM_OCNPolarity_High: Output Compare active high
  • TIM_OCNPolarity_Low: Output Compare active low
Return values
None

Definition at line 1828 of file stm32f10x_tim.c.

void TIM_OC1PolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPolarity 
)

Configures the TIMx channel 1 polarity.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_OCPolarityspecifies the OC1 Polarity This parameter can be one of the following values:
  • TIM_OCPolarity_High: Output Compare active high
  • TIM_OCPolarity_Low: Output Compare active low
Return values
None

Definition at line 1805 of file stm32f10x_tim.c.

void TIM_OC1PreloadConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPreload 
)

Enables or disables the TIMx peripheral Preload register on CCR1.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_OCPreloadnew state of the TIMx peripheral Preload register This parameter can be one of the following values:
  • TIM_OCPreload_Enable
  • TIM_OCPreload_Disable
Return values
None

Definition at line 1509 of file stm32f10x_tim.c.

void TIM_OC2FastConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCFast 
)

Configures the TIMx Output Compare 2 Fast feature.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_OCFastnew state of the Output Compare Fast Enable Bit. This parameter can be one of the following values:
  • TIM_OCFast_Enable: TIM output compare fast enable
  • TIM_OCFast_Disable: TIM output compare fast disable
Return values
None

Definition at line 1632 of file stm32f10x_tim.c.

void TIM_OC2Init ( TIM_TypeDef TIMx,
TIM_OCInitTypeDef TIM_OCInitStruct 
)

Initializes the TIMx Channel2 according to the specified parameters in the TIM_OCInitStruct.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_OCInitStructpointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 362 of file stm32f10x_tim.c.

void TIM_OC2NPolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCNPolarity 
)

Configures the TIMx Channel 2N polarity.

Parameters
TIMxwhere x can be 1 or 8 to select the TIM peripheral.
TIM_OCNPolarityspecifies the OC2N Polarity This parameter can be one of the following values:
  • TIM_OCNPolarity_High: Output Compare active high
  • TIM_OCNPolarity_Low: Output Compare active low
Return values
None

Definition at line 1875 of file stm32f10x_tim.c.

void TIM_OC2PolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPolarity 
)

Configures the TIMx channel 2 polarity.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_OCPolarityspecifies the OC2 Polarity This parameter can be one of the following values:
  • TIM_OCPolarity_High: Output Compare active high
  • TIM_OCPolarity_Low: Output Compare active low
Return values
None

Definition at line 1852 of file stm32f10x_tim.c.

void TIM_OC2PreloadConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPreload 
)

Enables or disables the TIMx peripheral Preload register on CCR2.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_OCPreloadnew state of the TIMx peripheral Preload register This parameter can be one of the following values:
  • TIM_OCPreload_Enable
  • TIM_OCPreload_Disable
Return values
None

Definition at line 1534 of file stm32f10x_tim.c.

void TIM_OC3FastConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCFast 
)

Configures the TIMx Output Compare 3 Fast feature.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCFastnew state of the Output Compare Fast Enable Bit. This parameter can be one of the following values:
  • TIM_OCFast_Enable: TIM output compare fast enable
  • TIM_OCFast_Disable: TIM output compare fast disable
Return values
None

Definition at line 1657 of file stm32f10x_tim.c.

void TIM_OC3Init ( TIM_TypeDef TIMx,
TIM_OCInitTypeDef TIM_OCInitStruct 
)

Initializes the TIMx Channel3 according to the specified parameters in the TIM_OCInitStruct.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCInitStructpointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 444 of file stm32f10x_tim.c.

void TIM_OC3NPolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCNPolarity 
)

Configures the TIMx Channel 3N polarity.

Parameters
TIMxwhere x can be 1 or 8 to select the TIM peripheral.
TIM_OCNPolarityspecifies the OC3N Polarity This parameter can be one of the following values:
  • TIM_OCNPolarity_High: Output Compare active high
  • TIM_OCNPolarity_Low: Output Compare active low
Return values
None

Definition at line 1922 of file stm32f10x_tim.c.

void TIM_OC3PolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPolarity 
)

Configures the TIMx channel 3 polarity.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPolarityspecifies the OC3 Polarity This parameter can be one of the following values:
  • TIM_OCPolarity_High: Output Compare active high
  • TIM_OCPolarity_Low: Output Compare active low
Return values
None

Definition at line 1899 of file stm32f10x_tim.c.

void TIM_OC3PreloadConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPreload 
)

Enables or disables the TIMx peripheral Preload register on CCR3.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPreloadnew state of the TIMx peripheral Preload register This parameter can be one of the following values:
  • TIM_OCPreload_Enable
  • TIM_OCPreload_Disable
Return values
None

Definition at line 1558 of file stm32f10x_tim.c.

void TIM_OC4FastConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCFast 
)

Configures the TIMx Output Compare 4 Fast feature.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCFastnew state of the Output Compare Fast Enable Bit. This parameter can be one of the following values:
  • TIM_OCFast_Enable: TIM output compare fast enable
  • TIM_OCFast_Disable: TIM output compare fast disable
Return values
None

Definition at line 1682 of file stm32f10x_tim.c.

void TIM_OC4Init ( TIM_TypeDef TIMx,
TIM_OCInitTypeDef TIM_OCInitStruct 
)

Initializes the TIMx Channel4 according to the specified parameters in the TIM_OCInitStruct.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCInitStructpointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 523 of file stm32f10x_tim.c.

void TIM_OC4PolarityConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPolarity 
)

Configures the TIMx channel 4 polarity.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPolarityspecifies the OC4 Polarity This parameter can be one of the following values:
  • TIM_OCPolarity_High: Output Compare active high
  • TIM_OCPolarity_Low: Output Compare active low
Return values
None

Definition at line 1947 of file stm32f10x_tim.c.

void TIM_OC4PreloadConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_OCPreload 
)

Enables or disables the TIMx peripheral Preload register on CCR4.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPreloadnew state of the TIMx peripheral Preload register This parameter can be one of the following values:
  • TIM_OCPreload_Enable
  • TIM_OCPreload_Disable
Return values
None

Definition at line 1582 of file stm32f10x_tim.c.

void TIM_OCStructInit ( TIM_OCInitTypeDef TIM_OCInitStruct)

Fills each TIM_OCInitStruct member with its default value.

Parameters
TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure which will be initialized.
Return values
None

Definition at line 752 of file stm32f10x_tim.c.

void TIM_PrescalerConfig ( TIM_TypeDef TIMx,
uint16_t  Prescaler,
uint16_t  TIM_PSCReloadMode 
)

Configures the TIMx Prescaler.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
Prescalerspecifies the Prescaler Register value
TIM_PSCReloadModespecifies the TIM Prescaler Reload mode This parameter can be one of the following values:
  • TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
  • TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately.
Return values
None

Definition at line 1176 of file stm32f10x_tim.c.

void TIM_PWMIConfig ( TIM_TypeDef TIMx,
TIM_ICInitTypeDef TIM_ICInitStruct 
)

Configures the TIM peripheral according to the specified parameters in the TIM_ICInitStruct to measure an external PWM signal.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_ICInitStructpointer to a TIM_ICInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 654 of file stm32f10x_tim.c.

void TIM_SelectCCDMA ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Selects the TIMx peripheral Capture Compare DMA source.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select the TIM peripheral.
NewStatenew state of the Capture Compare DMA source This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1458 of file stm32f10x_tim.c.

void TIM_SelectCOM ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Selects the TIM peripheral Commutation event.

Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral
NewStatenew state of the Commutation event. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1433 of file stm32f10x_tim.c.

void TIM_SelectHallSensor ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables the TIMx's Hall sensor interface.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
NewStatenew state of the TIMx Hall sensor interface. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2144 of file stm32f10x_tim.c.

void TIM_SelectInputTrigger ( TIM_TypeDef TIMx,
uint16_t  TIM_InputTriggerSource 
)

Selects the Input Trigger source.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_InputTriggerSourceThe Input Trigger source. This parameter can be one of the following values:
  • TIM_TS_ITR0: Internal Trigger 0
  • TIM_TS_ITR1: Internal Trigger 1
  • TIM_TS_ITR2: Internal Trigger 2
  • TIM_TS_ITR3: Internal Trigger 3
  • TIM_TS_TI1F_ED: TI1 Edge Detector
  • TIM_TS_TI1FP1: Filtered Timer Input 1
  • TIM_TS_TI2FP2: Filtered Timer Input 2
  • TIM_TS_ETRF: External Trigger input
Return values
None

Definition at line 1229 of file stm32f10x_tim.c.

void TIM_SelectMasterSlaveMode ( TIM_TypeDef TIMx,
uint16_t  TIM_MasterSlaveMode 
)

Sets or Resets the TIMx Master/Slave Mode.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_MasterSlaveModespecifies the Timer Master Slave Mode. This parameter can be one of the following values:
  • TIM_MasterSlaveMode_Enable: synchronization between the current timer and its slaves (through TRGO).
  • TIM_MasterSlaveMode_Disable: No action
Return values
None

Definition at line 2246 of file stm32f10x_tim.c.

void TIM_SelectOCxM ( TIM_TypeDef TIMx,
uint16_t  TIM_Channel,
uint16_t  TIM_OCMode 
)

Selects the TIM Output Compare Mode.

Note
This function disables the selected channel before changing the Output Compare Mode. User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions.
Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_Channelspecifies the TIM Channel This parameter can be one of the following values:
  • TIM_Channel_1: TIM Channel 1
  • TIM_Channel_2: TIM Channel 2
  • TIM_Channel_3: TIM Channel 3
  • TIM_Channel_4: TIM Channel 4
TIM_OCModespecifies the TIM Output Compare Mode. This parameter can be one of the following values:
  • TIM_OCMode_Timing
  • TIM_OCMode_Active
  • TIM_OCMode_Toggle
  • TIM_OCMode_PWM1
  • TIM_OCMode_PWM2
  • TIM_ForcedAction_Active
  • TIM_ForcedAction_InActive
Return values
None

Definition at line 2045 of file stm32f10x_tim.c.

void TIM_SelectOnePulseMode ( TIM_TypeDef TIMx,
uint16_t  TIM_OPMode 
)

Selects the TIMx's One Pulse Mode.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_OPModespecifies the OPM Mode to be used. This parameter can be one of the following values:
  • TIM_OPMode_Single
  • TIM_OPMode_Repetitive
Return values
None

Definition at line 2170 of file stm32f10x_tim.c.

void TIM_SelectOutputTrigger ( TIM_TypeDef TIMx,
uint16_t  TIM_TRGOSource 
)

Selects the TIMx Trigger Output Mode.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_TRGOSourcespecifies the Trigger Output source. This paramter can be one of the following values:
  • For all TIMx
    • TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO).
    • TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO).
    • TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO).
  • For all TIMx except TIM6 and TIM7
    • TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag is to be set, as soon as a capture or compare match occurs (TRGO).
    • TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO).
    • TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO).
    • TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO).
    • TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO).
    Return values
    None

Definition at line 2202 of file stm32f10x_tim.c.

void TIM_SelectSlaveMode ( TIM_TypeDef TIMx,
uint16_t  TIM_SlaveMode 
)

Selects the TIMx Slave Mode.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_SlaveModespecifies the Timer Slave Mode. This parameter can be one of the following values:
  • TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes the counter and triggers an update of the registers.
  • TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high.
  • TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI.
  • TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter.
Return values
None

Definition at line 2225 of file stm32f10x_tim.c.

void TIM_SetAutoreload ( TIM_TypeDef TIMx,
uint16_t  Autoreload 
)

Sets the TIMx Autoreload Register value.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
Autoreloadspecifies the Autoreload register new value.
Return values
None

Definition at line 2278 of file stm32f10x_tim.c.

void TIM_SetClockDivision ( TIM_TypeDef TIMx,
uint16_t  TIM_CKD 
)

Sets the TIMx Clock Division value.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_CKDspecifies the clock division value. This parameter can be one of the following value:
  • TIM_CKD_DIV1: TDTS = Tck_tim
  • TIM_CKD_DIV2: TDTS = 2*Tck_tim
  • TIM_CKD_DIV4: TDTS = 4*Tck_tim
Return values
None

Definition at line 2441 of file stm32f10x_tim.c.

void TIM_SetCompare1 ( TIM_TypeDef TIMx,
uint16_t  Compare1 
)

Sets the TIMx Capture Compare1 Register value.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
Compare1specifies the Capture Compare1 register new value.
Return values
None

Definition at line 2292 of file stm32f10x_tim.c.

void TIM_SetCompare2 ( TIM_TypeDef TIMx,
uint16_t  Compare2 
)

Sets the TIMx Capture Compare2 Register value.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
Compare2specifies the Capture Compare2 register new value.
Return values
None

Definition at line 2306 of file stm32f10x_tim.c.

void TIM_SetCompare3 ( TIM_TypeDef TIMx,
uint16_t  Compare3 
)

Sets the TIMx Capture Compare3 Register value.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
Compare3specifies the Capture Compare3 register new value.
Return values
None

Definition at line 2320 of file stm32f10x_tim.c.

void TIM_SetCompare4 ( TIM_TypeDef TIMx,
uint16_t  Compare4 
)

Sets the TIMx Capture Compare4 Register value.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
Compare4specifies the Capture Compare4 register new value.
Return values
None

Definition at line 2334 of file stm32f10x_tim.c.

void TIM_SetCounter ( TIM_TypeDef TIMx,
uint16_t  Counter 
)

Sets the TIMx Counter Register value.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
Counterspecifies the Counter register new value.
Return values
None

Definition at line 2264 of file stm32f10x_tim.c.

void TIM_SetIC1Prescaler ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPSC 
)

Sets the TIMx Input Capture 1 prescaler.

Parameters
TIMxwhere x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
TIM_ICPSCspecifies the Input Capture1 prescaler new value. This parameter can be one of the following values:
  • TIM_ICPSC_DIV1: no prescaler
  • TIM_ICPSC_DIV2: capture is done once every 2 events
  • TIM_ICPSC_DIV4: capture is done once every 4 events
  • TIM_ICPSC_DIV8: capture is done once every 8 events
Return values
None

Definition at line 2353 of file stm32f10x_tim.c.

void TIM_SetIC2Prescaler ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPSC 
)

Sets the TIMx Input Capture 2 prescaler.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
TIM_ICPSCspecifies the Input Capture2 prescaler new value. This parameter can be one of the following values:
  • TIM_ICPSC_DIV1: no prescaler
  • TIM_ICPSC_DIV2: capture is done once every 2 events
  • TIM_ICPSC_DIV4: capture is done once every 4 events
  • TIM_ICPSC_DIV8: capture is done once every 8 events
Return values
None

Definition at line 2375 of file stm32f10x_tim.c.

void TIM_SetIC3Prescaler ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPSC 
)

Sets the TIMx Input Capture 3 prescaler.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ICPSCspecifies the Input Capture3 prescaler new value. This parameter can be one of the following values:
  • TIM_ICPSC_DIV1: no prescaler
  • TIM_ICPSC_DIV2: capture is done once every 2 events
  • TIM_ICPSC_DIV4: capture is done once every 4 events
  • TIM_ICPSC_DIV8: capture is done once every 8 events
Return values
None

Definition at line 2397 of file stm32f10x_tim.c.

void TIM_SetIC4Prescaler ( TIM_TypeDef TIMx,
uint16_t  TIM_ICPSC 
)

Sets the TIMx Input Capture 4 prescaler.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ICPSCspecifies the Input Capture4 prescaler new value. This parameter can be one of the following values:
  • TIM_ICPSC_DIV1: no prescaler
  • TIM_ICPSC_DIV2: capture is done once every 2 events
  • TIM_ICPSC_DIV4: capture is done once every 4 events
  • TIM_ICPSC_DIV8: capture is done once every 8 events
Return values
None

Definition at line 2419 of file stm32f10x_tim.c.

void TIM_TimeBaseInit ( TIM_TypeDef TIMx,
TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStruct 
)

Initializes the TIMx Time Base Unit peripheral according to the specified parameters in the TIM_TimeBaseInitStruct.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_TimeBaseInitStructpointer to a TIM_TimeBaseInitTypeDef structure that contains the configuration information for the specified TIM peripheral.
Return values
None

Definition at line 226 of file stm32f10x_tim.c.

void TIM_TimeBaseStructInit ( TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStruct)

Fills each TIM_TimeBaseInitStruct member with its default value.

Parameters
TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef structure which will be initialized.
Return values
None

Definition at line 736 of file stm32f10x_tim.c.

void TIM_TIxExternalClockConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_TIxExternalCLKSource,
uint16_t  TIM_ICPolarity,
uint16_t  ICFilter 
)

Configures the TIMx Trigger as External Clock.

Parameters
TIMxwhere x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
TIM_TIxExternalCLKSourceTrigger source. This parameter can be one of the following values:
  • TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
  • TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
  • TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
TIM_ICPolarityspecifies the TIx Polarity. This parameter can be one of the following values:
  • TIM_ICPolarity_Rising
  • TIM_ICPolarity_Falling
ICFilter: specifies the filter value. This parameter must be a value between 0x0 and 0xF.
Return values
None

Definition at line 1035 of file stm32f10x_tim.c.

void TIM_UpdateDisableConfig ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or Disables the TIMx Update event.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
NewStatenew state of the TIMx UDIS bit This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2092 of file stm32f10x_tim.c.

void TIM_UpdateRequestConfig ( TIM_TypeDef TIMx,
uint16_t  TIM_UpdateSource 
)

Configures the TIMx Update Request Interrupt source.

Parameters
TIMxwhere x can be 1 to 17 to select the TIM peripheral.
TIM_UpdateSourcespecifies the Update source. This parameter can be one of the following values:
  • TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow or the setting of UG bit, or an update generation through the slave mode controller.
  • TIM_UpdateSource_Global: Source of update is counter overflow/underflow.
Return values
None

Definition at line 2120 of file stm32f10x_tim.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:23