Functions

DMA transfers management functions. More...

Collaboration diagram for DMA transfers management functions:

Functions

void SPI_I2S_DMACmd (SPI_TypeDef *SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
 Enables or disables the SPIx/I2Sx DMA interface. More...
 
void SPI_LastDMATransferCmd (SPI_TypeDef *SPIx, uint16_t SPI_LastDMATransfer)
 Configures the number of data to transfer type(Even/Odd) for the DMA last transfers and for the selected SPI. More...
 

Detailed Description

DMA transfers management functions.

 ===============================================================================
                   ##### DMA transfers management functions #####
 ===============================================================================  

Function Documentation

void SPI_I2S_DMACmd ( SPI_TypeDef SPIx,
uint16_t  SPI_I2S_DMAReq,
FunctionalState  NewState 
)

Enables or disables the SPIx/I2Sx DMA interface.

Parameters
SPIxTo select the SPIx/I2Sx peripheral, where x can be: 1, 2, 3, 4, 5 or 6 in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode.
SPI_I2S_DMAReqspecifies the SPI DMA transfer request to be enabled or disabled. This parameter can be any combination of the following values:
  • SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
  • SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
NewStatenew state of the selected SPI DMA transfer request. This parameter can be: ENABLE or DISABLE.
Return values
None
Parameters
SPIx:Toselect the SPIx/I2Sx peripheral, where x can be: 1, 2 or 3 in SPI mode or 2 or 3 in I2S mode or I2Sxext for I2S full duplex mode.
SPI_I2S_DMAReqspecifies the SPI DMA transfer request to be enabled or disabled. This parameter can be any combination of the following values:
  • SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
  • SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
NewStatenew state of the selected SPI DMA transfer request. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1009 of file stm32f4xx_spi.c.

void SPI_LastDMATransferCmd ( SPI_TypeDef SPIx,
uint16_t  SPI_LastDMATransfer 
)

Configures the number of data to transfer type(Even/Odd) for the DMA last transfers and for the selected SPI.

Note
This function have a meaning only if DMA mode is selected and if the packing mode is used (data length <= 8 and DMA transfer size halfword)
Parameters
SPIxwhere x can be 1, 2 or 3 to select the SPI peripheral.
SPI_LastDMATransferspecifies the SPI last DMA transfers state. This parameter can be one of the following values:
  • SPI_LastDMATransfer_TxEvenRxEven: Number of data for transmission Even and number of data for reception Even.
  • SPI_LastDMATransfer_TxOddRxEven: Number of data for transmission Odd and number of data for reception Even.
  • SPI_LastDMATransfer_TxEvenRxOdd: Number of data for transmission Even and number of data for reception Odd.
  • SPI_LastDMATransfer_TxOddRxOdd: RNumber of data for transmission Odd and number of data for reception Odd.
Return values
None

Definition at line 1125 of file stm32f30x_spi.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Sep 3 2020 03:22:22