#include <string>
#include "../FEDM.h"
Go to the source code of this file.
Configuration parameters for security and access protection.
Configuration parameters for adjusting the RF-Interface.
Configuration parameters for adjusting the Antennas.
HF specific parameters
Miscellaneous configuration parameters
Antenna output 1.
UHF specific parameters
Antenna output 2.
Antenna output 3.
Antenna output 4.
Settings for error handling.
Settings for ICode UID and ICode EPC.
Settings for ISO 15693.
Settings for ISO 15693 and/or ICode1.
Settings for ISO 18000-3M3.
Configuration parameters for internal or external Multiplexer.
HF specific settings
External Multiplexer
Settings for Antenna Outputs.
Output 1.
Output 2.
Output 3.
Output 4.
Output 5.
Output 6.
Output 7.
Output 8.
UHF specific settings
Internal Multiplexer
Regional settings
Settings for European Union regulation.
Channel parameters
Settings for EN300220.
Settings for EN302208 4-Channel-Plan.
Preferred channels for EN302208 4-Channel-Plan.
Settings for EN302208 with LBT.
Settings for FCC regulation.
Settings for Korea regulation.
Configuration parameters for internal clock or timer.
Settings for Network Time Protocol.
IPv4 specific settings
IPv6 specific settings
Configuration parameters for digital inputs and outputs, Relays and LEDs.
Settings for digital inputs.
No 1.
No 2.
No 3.
No 4.
No 5.
Settings for digital outputs.
Settings for Access-Mode.
Event link.
Settings for Relays.
Settings for Signalers/Buzzers.
Settings for Buzzers.
Automatic activation by sources.
Settings for LEDs.
Blue LED
Green LED
LED No 1.
LED No 2.
LED No 3.
LED No 4.
LED No 5.
LED No 6.
LED No 7.
Red LED
Yellow LED
Configuration parameters for communication interfaces.
Bluetooth specific parameters
Data-Clock Port specific parameters.
LAN specific parameters
IPv4 specific connection parameters
IPv6 specific connection parameters
Keep-Alive specific parameters (important when network gets broken)
Connection parameters for Localhost (embedded Application)
Serial Port specific parameters
RS485 or RS422 specific parameters.
USB specific parameters
WLAN specific parameters
Connection parameters for secured transmission.
SSID parameters.
WEP Key
WPA Key
WPA2 Key
Configuration parameters for configuring the different working modes.
Configuration parameters for adjusting the Access-Mode (auto-read mode)
Parameters for selecting data items.
Parameters for defining the sources of Transponder data.
Access parameters for Mifare DESFire Transponders.
Parameters for filtering event data.
Parameters for defining transmission parameters.
Parameters for formatting the data output.
Parameters for defining the transmission destination.
Parameters for defining trigger conditions.
Parameters for defining the trigger source.
Configuration parameters for adjusting the Buffered-Read-Mode (auto-read mode)
Parameters for adjusting the selected data items.
Parameters for EAS (Electronic Article Surveillance)
Parameters for trigger source of type Input.
1st Input
2nd Input
3rd Input
4th Input
5th Input
Configuration parameters for adjusting the Host-Mode (polling mode)
Filter parameters
Configuration parameters for adjusting the Notification-Mode (auto-read mode)
Access parameters for Mifare Transponders.
Access parameters for Mifare Classic Transponders.
Access parameters for Mifare Ultralight Transponders.
Parameters for defining event parameters of Gate-People-Counter.
Configuration parameters for adjusting the Scan-Mode (auto-read mode)
Configuration parameters for Peripheral Devices, like People-Counter.
Settings for digital inputs and outputs.
RS485-Bus devices
Device with bus address 1.
N0 1.
Device with bus address 2.
Device with bus address 3.
Configuration parameters for adjusting the power consumption.
Additional tools.
Linux specific tools
Configuration parameters for Transponder drivers.
Anticollission settings.
Transponder Driver.
HF Drivers (in fixed execution order)
Sub-Drivers for ISO 14443.
Sub-Drivers for ISO 14443, Part A.
Drivers, in execution order defined by user.
UHF Driver
Configuration parameters for HF Transponders.
Configuration parameters for Transponder-specific Custom-Commands.
EM Microelectronic-Marin SA.
Fujitsu Limited
Infineon Technologies AG
NXP Semiconductors
STMicroelectronics SA
Texas Instruments.
>EPC Class1 Gen2 specific settings
Anticollision settings
I-Code1 specific settings.
Link settings.
Mask settings.
ICode UID and ICode EPC specific settings.
ISO 14443 specific settings.
ISO 14443, Part 4 specific settings.
ISO 14443, Type A specific settings.
ISO 14443, Type B specific settings.
ISO 15693 specific settings.
Settings for reading Transponder data.
ISO 18000-3M3 specific settings.
1st Mask
Persistence Reset settings.
Settings for Antenna outputs.
Configuration parameters for UHF Transponders.
EPC Class1 Gen1 specific settings.
EPC Class1 Gen2 specific settings.
2nd Mask
3rd Mask
ISO 18000-6B specific settings.