wireless_copy.h
Go to the documentation of this file.
00001 /* This is based on Linux Wireless Extensions header file from WIRELESS_EXT 18.
00002  * I have just removed kernel related headers and added some typedefs etc. to
00003  * make this easier to include into user space programs.
00004  * Jouni Malinen, 2005-03-12.
00005  */
00006 
00007 
00008 /*
00009  * This file define a set of standard wireless extensions
00010  *
00011  * Version :    19      18.3.05
00012  *
00013  * Authors :    Jean Tourrilhes - HPL - <jt@hpl.hp.com>
00014  * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved.
00015  */
00016 
00017 #ifndef _LINUX_WIRELESS_H
00018 #define _LINUX_WIRELESS_H
00019 
00020 /************************** DOCUMENTATION **************************/
00021 /*
00022  * Initial APIs (1996 -> onward) :
00023  * -----------------------------
00024  * Basically, the wireless extensions are for now a set of standard ioctl
00025  * call + /proc/net/wireless
00026  *
00027  * The entry /proc/net/wireless give statistics and information on the
00028  * driver.
00029  * This is better than having each driver having its entry because
00030  * its centralised and we may remove the driver module safely.
00031  *
00032  * Ioctl are used to configure the driver and issue commands.  This is
00033  * better than command line options of insmod because we may want to
00034  * change dynamically (while the driver is running) some parameters.
00035  *
00036  * The ioctl mechanimsm are copied from standard devices ioctl.
00037  * We have the list of command plus a structure descibing the
00038  * data exchanged...
00039  * Note that to add these ioctl, I was obliged to modify :
00040  *      # net/core/dev.c (two place + add include)
00041  *      # net/ipv4/af_inet.c (one place + add include)
00042  *
00043  * /proc/net/wireless is a copy of /proc/net/dev.
00044  * We have a structure for data passed from the driver to /proc/net/wireless
00045  * Too add this, I've modified :
00046  *      # net/core/dev.c (two other places)
00047  *      # include/linux/netdevice.h (one place)
00048  *      # include/linux/proc_fs.h (one place)
00049  *
00050  * New driver API (2002 -> onward) :
00051  * -------------------------------
00052  * This file is only concerned with the user space API and common definitions.
00053  * The new driver API is defined and documented in :
00054  *      # include/net/iw_handler.h
00055  *
00056  * Note as well that /proc/net/wireless implementation has now moved in :
00057  *      # net/core/wireless.c
00058  *
00059  * Wireless Events (2002 -> onward) :
00060  * --------------------------------
00061  * Events are defined at the end of this file, and implemented in :
00062  *      # net/core/wireless.c
00063  *
00064  * Other comments :
00065  * --------------
00066  * Do not add here things that are redundant with other mechanisms
00067  * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
00068  * wireless specific.
00069  *
00070  * These wireless extensions are not magic : each driver has to provide
00071  * support for them...
00072  *
00073  * IMPORTANT NOTE : As everything in the kernel, this is very much a
00074  * work in progress. Contact me if you have ideas of improvements...
00075  */
00076 
00077 /***************************** INCLUDES *****************************/
00078 
00079  /* jkm - replaced linux headers with C library headers, added typedefs */
00080 #if 0
00081 /* To minimise problems in user space, I might remove those headers
00082  * at some point. Jean II */
00083 #include <linux/types.h>                /* for "caddr_t" et al          */
00084 #include <linux/socket.h>               /* for "struct sockaddr" et al  */
00085 #include <linux/if.h>                   /* for IFNAMSIZ and co... */
00086 #else
00087 #include <sys/types.h>
00088 #include <net/if.h>
00089 typedef __uint32_t __u32;
00090 typedef __int32_t __s32;
00091 typedef __uint16_t __u16;
00092 typedef __int16_t __s16;
00093 typedef __uint8_t __u8;
00094 #ifndef __user
00095 #define __user
00096 #endif /* __user */
00097 #endif
00098 
00099 /***************************** VERSION *****************************/
00100 /*
00101  * This constant is used to know the availability of the wireless
00102  * extensions and to know which version of wireless extensions it is
00103  * (there is some stuff that will be added in the future...)
00104  * I just plan to increment with each new version.
00105  */
00106 #define WIRELESS_EXT    19
00107 
00108 /*
00109  * Changes :
00110  *
00111  * V2 to V3
00112  * --------
00113  *      Alan Cox start some incompatibles changes. I've integrated a bit more.
00114  *      - Encryption renamed to Encode to avoid US regulation problems
00115  *      - Frequency changed from float to struct to avoid problems on old 386
00116  *
00117  * V3 to V4
00118  * --------
00119  *      - Add sensitivity
00120  *
00121  * V4 to V5
00122  * --------
00123  *      - Missing encoding definitions in range
00124  *      - Access points stuff
00125  *
00126  * V5 to V6
00127  * --------
00128  *      - 802.11 support (ESSID ioctls)
00129  *
00130  * V6 to V7
00131  * --------
00132  *      - define IW_ESSID_MAX_SIZE and IW_MAX_AP
00133  *
00134  * V7 to V8
00135  * --------
00136  *      - Changed my e-mail address
00137  *      - More 802.11 support (nickname, rate, rts, frag)
00138  *      - List index in frequencies
00139  *
00140  * V8 to V9
00141  * --------
00142  *      - Support for 'mode of operation' (ad-hoc, managed...)
00143  *      - Support for unicast and multicast power saving
00144  *      - Change encoding to support larger tokens (>64 bits)
00145  *      - Updated iw_params (disable, flags) and use it for NWID
00146  *      - Extracted iw_point from iwreq for clarity
00147  *
00148  * V9 to V10
00149  * ---------
00150  *      - Add PM capability to range structure
00151  *      - Add PM modifier : MAX/MIN/RELATIVE
00152  *      - Add encoding option : IW_ENCODE_NOKEY
00153  *      - Add TxPower ioctls (work like TxRate)
00154  *
00155  * V10 to V11
00156  * ----------
00157  *      - Add WE version in range (help backward/forward compatibility)
00158  *      - Add retry ioctls (work like PM)
00159  *
00160  * V11 to V12
00161  * ----------
00162  *      - Add SIOCSIWSTATS to get /proc/net/wireless programatically
00163  *      - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
00164  *      - Add new statistics (frag, retry, beacon)
00165  *      - Add average quality (for user space calibration)
00166  *
00167  * V12 to V13
00168  * ----------
00169  *      - Document creation of new driver API.
00170  *      - Extract union iwreq_data from struct iwreq (for new driver API).
00171  *      - Rename SIOCSIWNAME as SIOCSIWCOMMIT
00172  *
00173  * V13 to V14
00174  * ----------
00175  *      - Wireless Events support : define struct iw_event
00176  *      - Define additional specific event numbers
00177  *      - Add "addr" and "param" fields in union iwreq_data
00178  *      - AP scanning stuff (SIOCSIWSCAN and friends)
00179  *
00180  * V14 to V15
00181  * ----------
00182  *      - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
00183  *      - Make struct iw_freq signed (both m & e), add explicit padding
00184  *      - Add IWEVCUSTOM for driver specific event/scanning token
00185  *      - Add IW_MAX_GET_SPY for driver returning a lot of addresses
00186  *      - Add IW_TXPOW_RANGE for range of Tx Powers
00187  *      - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
00188  *      - Add IW_MODE_MONITOR for passive monitor
00189  *
00190  * V15 to V16
00191  * ----------
00192  *      - Increase the number of bitrates in iw_range to 32 (for 802.11g)
00193  *      - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
00194  *      - Reshuffle struct iw_range for increases, add filler
00195  *      - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
00196  *      - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
00197  *      - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
00198  *      - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
00199  *
00200  * V16 to V17
00201  * ----------
00202  *      - Add flags to frequency -> auto/fixed
00203  *      - Document (struct iw_quality *)->updated, add new flags (INVALID)
00204  *      - Wireless Event capability in struct iw_range
00205  *      - Add support for relative TxPower (yick !)
00206  *
00207  * V17 to V18 (From Jouni Malinen <j@w1.fi>)
00208  * ----------
00209  *      - Add support for WPA/WPA2
00210  *      - Add extended encoding configuration (SIOCSIWENCODEEXT and
00211  *        SIOCGIWENCODEEXT)
00212  *      - Add SIOCSIWGENIE/SIOCGIWGENIE
00213  *      - Add SIOCSIWMLME
00214  *      - Add SIOCSIWPMKSA
00215  *      - Add struct iw_range bit field for supported encoding capabilities
00216  *      - Add optional scan request parameters for SIOCSIWSCAN
00217  *      - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
00218  *        related parameters (extensible up to 4096 parameter values)
00219  *      - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
00220  *        IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
00221  *
00222  * V18 to V19
00223  * ----------
00224  *      - Remove (struct iw_point *)->pointer from events and streams
00225  *      - Remove header includes to help user space
00226  *      - Increase IW_ENCODING_TOKEN_MAX from 32 to 64
00227  *      - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
00228  *      - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
00229  *      - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
00230  */
00231 
00232 /**************************** CONSTANTS ****************************/
00233 
00234 /* -------------------------- IOCTL LIST -------------------------- */
00235 
00236 /* Wireless Identification */
00237 #define SIOCSIWCOMMIT   0x8B00          /* Commit pending changes to driver */
00238 #define SIOCGIWNAME     0x8B01          /* get name == wireless protocol */
00239 /* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
00240  * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
00241  * Don't put the name of your driver there, it's useless. */
00242 
00243 /* Basic operations */
00244 #define SIOCSIWNWID     0x8B02          /* set network id (pre-802.11) */
00245 #define SIOCGIWNWID     0x8B03          /* get network id (the cell) */
00246 #define SIOCSIWFREQ     0x8B04          /* set channel/frequency (Hz) */
00247 #define SIOCGIWFREQ     0x8B05          /* get channel/frequency (Hz) */
00248 #define SIOCSIWMODE     0x8B06          /* set operation mode */
00249 #define SIOCGIWMODE     0x8B07          /* get operation mode */
00250 #define SIOCSIWSENS     0x8B08          /* set sensitivity (dBm) */
00251 #define SIOCGIWSENS     0x8B09          /* get sensitivity (dBm) */
00252 
00253 /* Informative stuff */
00254 #define SIOCSIWRANGE    0x8B0A          /* Unused */
00255 #define SIOCGIWRANGE    0x8B0B          /* Get range of parameters */
00256 #define SIOCSIWPRIV     0x8B0C          /* Unused */
00257 #define SIOCGIWPRIV     0x8B0D          /* get private ioctl interface info */
00258 #define SIOCSIWSTATS    0x8B0E          /* Unused */
00259 #define SIOCGIWSTATS    0x8B0F          /* Get /proc/net/wireless stats */
00260 /* SIOCGIWSTATS is strictly used between user space and the kernel, and
00261  * is never passed to the driver (i.e. the driver will never see it). */
00262 
00263 /* Spy support (statistics per MAC address - used for Mobile IP support) */
00264 #define SIOCSIWSPY      0x8B10          /* set spy addresses */
00265 #define SIOCGIWSPY      0x8B11          /* get spy info (quality of link) */
00266 #define SIOCSIWTHRSPY   0x8B12          /* set spy threshold (spy event) */
00267 #define SIOCGIWTHRSPY   0x8B13          /* get spy threshold */
00268 
00269 /* Access Point manipulation */
00270 #define SIOCSIWAP       0x8B14          /* set access point MAC addresses */
00271 #define SIOCGIWAP       0x8B15          /* get access point MAC addresses */
00272 #define SIOCGIWAPLIST   0x8B17          /* Deprecated in favor of scanning */
00273 #define SIOCSIWSCAN     0x8B18          /* trigger scanning (list cells) */
00274 #define SIOCGIWSCAN     0x8B19          /* get scanning results */
00275 
00276 /* 802.11 specific support */
00277 #define SIOCSIWESSID    0x8B1A          /* set ESSID (network name) */
00278 #define SIOCGIWESSID    0x8B1B          /* get ESSID */
00279 #define SIOCSIWNICKN    0x8B1C          /* set node name/nickname */
00280 #define SIOCGIWNICKN    0x8B1D          /* get node name/nickname */
00281 /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
00282  * within the 'iwreq' structure, so we need to use the 'data' member to
00283  * point to a string in user space, like it is done for RANGE... */
00284 
00285 /* Other parameters useful in 802.11 and some other devices */
00286 #define SIOCSIWRATE     0x8B20          /* set default bit rate (bps) */
00287 #define SIOCGIWRATE     0x8B21          /* get default bit rate (bps) */
00288 #define SIOCSIWRTS      0x8B22          /* set RTS/CTS threshold (bytes) */
00289 #define SIOCGIWRTS      0x8B23          /* get RTS/CTS threshold (bytes) */
00290 #define SIOCSIWFRAG     0x8B24          /* set fragmentation thr (bytes) */
00291 #define SIOCGIWFRAG     0x8B25          /* get fragmentation thr (bytes) */
00292 #define SIOCSIWTXPOW    0x8B26          /* set transmit power (dBm) */
00293 #define SIOCGIWTXPOW    0x8B27          /* get transmit power (dBm) */
00294 #define SIOCSIWRETRY    0x8B28          /* set retry limits and lifetime */
00295 #define SIOCGIWRETRY    0x8B29          /* get retry limits and lifetime */
00296 
00297 /* Encoding stuff (scrambling, hardware security, WEP...) */
00298 #define SIOCSIWENCODE   0x8B2A          /* set encoding token & mode */
00299 #define SIOCGIWENCODE   0x8B2B          /* get encoding token & mode */
00300 /* Power saving stuff (power management, unicast and multicast) */
00301 #define SIOCSIWPOWER    0x8B2C          /* set Power Management settings */
00302 #define SIOCGIWPOWER    0x8B2D          /* get Power Management settings */
00303 
00304 /* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
00305  * This ioctl uses struct iw_point and data buffer that includes IE id and len
00306  * fields. More than one IE may be included in the request. Setting the generic
00307  * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
00308  * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
00309  * are required to report the used IE as a wireless event, e.g., when
00310  * associating with an AP. */
00311 #define SIOCSIWGENIE    0x8B30          /* set generic IE */
00312 #define SIOCGIWGENIE    0x8B31          /* get generic IE */
00313 
00314 /* WPA : IEEE 802.11 MLME requests */
00315 #define SIOCSIWMLME     0x8B16          /* request MLME operation; uses
00316                                          * struct iw_mlme */
00317 /* WPA : Authentication mode parameters */
00318 #define SIOCSIWAUTH     0x8B32          /* set authentication mode params */
00319 #define SIOCGIWAUTH     0x8B33          /* get authentication mode params */
00320 
00321 /* WPA : Extended version of encoding configuration */
00322 #define SIOCSIWENCODEEXT 0x8B34         /* set encoding token & mode */
00323 #define SIOCGIWENCODEEXT 0x8B35         /* get encoding token & mode */
00324 
00325 /* WPA2 : PMKSA cache management */
00326 #define SIOCSIWPMKSA    0x8B36          /* PMKSA cache operation */
00327 
00328 /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
00329 
00330 /* These 32 ioctl are wireless device private, for 16 commands.
00331  * Each driver is free to use them for whatever purpose it chooses,
00332  * however the driver *must* export the description of those ioctls
00333  * with SIOCGIWPRIV and *must* use arguments as defined below.
00334  * If you don't follow those rules, DaveM is going to hate you (reason :
00335  * it make mixed 32/64bit operation impossible).
00336  */
00337 #define SIOCIWFIRSTPRIV 0x8BE0
00338 #define SIOCIWLASTPRIV  0x8BFF
00339 /* Previously, we were using SIOCDEVPRIVATE, but we now have our
00340  * separate range because of collisions with other tools such as
00341  * 'mii-tool'.
00342  * We now have 32 commands, so a bit more space ;-).
00343  * Also, all 'odd' commands are only usable by root and don't return the
00344  * content of ifr/iwr to user (but you are not obliged to use the set/get
00345  * convention, just use every other two command). More details in iwpriv.c.
00346  * And I repeat : you are not forced to use them with iwpriv, but you
00347  * must be compliant with it.
00348  */
00349 
00350 /* ------------------------- IOCTL STUFF ------------------------- */
00351 
00352 /* The first and the last (range) */
00353 #define SIOCIWFIRST     0x8B00
00354 #define SIOCIWLAST      SIOCIWLASTPRIV          /* 0x8BFF */
00355 #define IW_IOCTL_IDX(cmd)       ((cmd) - SIOCIWFIRST)
00356 
00357 /* Even : get (world access), odd : set (root access) */
00358 #define IW_IS_SET(cmd)  (!((cmd) & 0x1))
00359 #define IW_IS_GET(cmd)  ((cmd) & 0x1)
00360 
00361 /* ----------------------- WIRELESS EVENTS ----------------------- */
00362 /* Those are *NOT* ioctls, do not issue request on them !!! */
00363 /* Most events use the same identifier as ioctl requests */
00364 
00365 #define IWEVTXDROP      0x8C00          /* Packet dropped to excessive retry */
00366 #define IWEVQUAL        0x8C01          /* Quality part of statistics (scan) */
00367 #define IWEVCUSTOM      0x8C02          /* Driver specific ascii string */
00368 #define IWEVREGISTERED  0x8C03          /* Discovered a new node (AP mode) */
00369 #define IWEVEXPIRED     0x8C04          /* Expired a node (AP mode) */
00370 #define IWEVGENIE       0x8C05          /* Generic IE (WPA, RSN, WMM, ..)
00371                                          * (scan results); This includes id and
00372                                          * length fields. One IWEVGENIE may
00373                                          * contain more than one IE. Scan
00374                                          * results may contain one or more
00375                                          * IWEVGENIE events. */
00376 #define IWEVMICHAELMICFAILURE 0x8C06    /* Michael MIC failure
00377                                          * (struct iw_michaelmicfailure)
00378                                          */
00379 #define IWEVASSOCREQIE  0x8C07          /* IEs used in (Re)Association Request.
00380                                          * The data includes id and length
00381                                          * fields and may contain more than one
00382                                          * IE. This event is required in
00383                                          * Managed mode if the driver
00384                                          * generates its own WPA/RSN IE. This
00385                                          * should be sent just before
00386                                          * IWEVREGISTERED event for the
00387                                          * association. */
00388 #define IWEVASSOCRESPIE 0x8C08          /* IEs used in (Re)Association
00389                                          * Response. The data includes id and
00390                                          * length fields and may contain more
00391                                          * than one IE. This may be sent
00392                                          * between IWEVASSOCREQIE and
00393                                          * IWEVREGISTERED events for the
00394                                          * association. */
00395 #define IWEVPMKIDCAND   0x8C09          /* PMKID candidate for RSN
00396                                          * pre-authentication
00397                                          * (struct iw_pmkid_cand) */
00398 
00399 #define IWEVFIRST       0x8C00
00400 #define IW_EVENT_IDX(cmd)       ((cmd) - IWEVFIRST)
00401 
00402 /* ------------------------- PRIVATE INFO ------------------------- */
00403 /*
00404  * The following is used with SIOCGIWPRIV. It allow a driver to define
00405  * the interface (name, type of data) for its private ioctl.
00406  * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
00407  */
00408 
00409 #define IW_PRIV_TYPE_MASK       0x7000  /* Type of arguments */
00410 #define IW_PRIV_TYPE_NONE       0x0000
00411 #define IW_PRIV_TYPE_BYTE       0x1000  /* Char as number */
00412 #define IW_PRIV_TYPE_CHAR       0x2000  /* Char as character */
00413 #define IW_PRIV_TYPE_INT        0x4000  /* 32 bits int */
00414 #define IW_PRIV_TYPE_FLOAT      0x5000  /* struct iw_freq */
00415 #define IW_PRIV_TYPE_ADDR       0x6000  /* struct sockaddr */
00416 
00417 #define IW_PRIV_SIZE_FIXED      0x0800  /* Variable or fixed number of args */
00418 
00419 #define IW_PRIV_SIZE_MASK       0x07FF  /* Max number of those args */
00420 
00421 /*
00422  * Note : if the number of args is fixed and the size < 16 octets,
00423  * instead of passing a pointer we will put args in the iwreq struct...
00424  */
00425 
00426 /* ----------------------- OTHER CONSTANTS ----------------------- */
00427 
00428 /* Maximum frequencies in the range struct */
00429 #define IW_MAX_FREQUENCIES      32
00430 /* Note : if you have something like 80 frequencies,
00431  * don't increase this constant and don't fill the frequency list.
00432  * The user will be able to set by channel anyway... */
00433 
00434 /* Maximum bit rates in the range struct */
00435 #define IW_MAX_BITRATES         32
00436 
00437 /* Maximum tx powers in the range struct */
00438 #define IW_MAX_TXPOWER          8
00439 /* Note : if you more than 8 TXPowers, just set the max and min or
00440  * a few of them in the struct iw_range. */
00441 
00442 /* Maximum of address that you may set with SPY */
00443 #define IW_MAX_SPY              8
00444 
00445 /* Maximum of address that you may get in the
00446    list of access points in range */
00447 #define IW_MAX_AP               64
00448 
00449 /* Maximum size of the ESSID and NICKN strings */
00450 #define IW_ESSID_MAX_SIZE       32
00451 
00452 /* Modes of operation */
00453 #define IW_MODE_AUTO    0       /* Let the driver decides */
00454 #define IW_MODE_ADHOC   1       /* Single cell network */
00455 #define IW_MODE_INFRA   2       /* Multi cell network, roaming, ... */
00456 #define IW_MODE_MASTER  3       /* Synchronisation master or Access Point */
00457 #define IW_MODE_REPEAT  4       /* Wireless Repeater (forwarder) */
00458 #define IW_MODE_SECOND  5       /* Secondary master/repeater (backup) */
00459 #define IW_MODE_MONITOR 6       /* Passive monitor (listen only) */
00460 
00461 /* Statistics flags (bitmask in updated) */
00462 #define IW_QUAL_QUAL_UPDATED    0x01    /* Value was updated since last read */
00463 #define IW_QUAL_LEVEL_UPDATED   0x02
00464 #define IW_QUAL_NOISE_UPDATED   0x04
00465 #define IW_QUAL_ALL_UPDATED     0x07
00466 #define IW_QUAL_DBM             0x08    /* Level + Noise are dBm */
00467 #define IW_QUAL_QUAL_INVALID    0x10    /* Driver doesn't provide value */
00468 #define IW_QUAL_LEVEL_INVALID   0x20
00469 #define IW_QUAL_NOISE_INVALID   0x40
00470 #define IW_QUAL_ALL_INVALID     0x70
00471 
00472 /* Frequency flags */
00473 #define IW_FREQ_AUTO            0x00    /* Let the driver decides */
00474 #define IW_FREQ_FIXED           0x01    /* Force a specific value */
00475 
00476 /* Maximum number of size of encoding token available
00477  * they are listed in the range structure */
00478 #define IW_MAX_ENCODING_SIZES   8
00479 
00480 /* Maximum size of the encoding token in bytes */
00481 #define IW_ENCODING_TOKEN_MAX   64      /* 512 bits (for now) */
00482 
00483 /* Flags for encoding (along with the token) */
00484 #define IW_ENCODE_INDEX         0x00FF  /* Token index (if needed) */
00485 #define IW_ENCODE_FLAGS         0xFF00  /* Flags defined below */
00486 #define IW_ENCODE_MODE          0xF000  /* Modes defined below */
00487 #define IW_ENCODE_DISABLED      0x8000  /* Encoding disabled */
00488 #define IW_ENCODE_ENABLED       0x0000  /* Encoding enabled */
00489 #define IW_ENCODE_RESTRICTED    0x4000  /* Refuse non-encoded packets */
00490 #define IW_ENCODE_OPEN          0x2000  /* Accept non-encoded packets */
00491 #define IW_ENCODE_NOKEY         0x0800  /* Key is write only, so not present */
00492 #define IW_ENCODE_TEMP          0x0400  /* Temporary key */
00493 
00494 /* Power management flags available (along with the value, if any) */
00495 #define IW_POWER_ON             0x0000  /* No details... */
00496 #define IW_POWER_TYPE           0xF000  /* Type of parameter */
00497 #define IW_POWER_PERIOD         0x1000  /* Value is a period/duration of  */
00498 #define IW_POWER_TIMEOUT        0x2000  /* Value is a timeout (to go asleep) */
00499 #define IW_POWER_MODE           0x0F00  /* Power Management mode */
00500 #define IW_POWER_UNICAST_R      0x0100  /* Receive only unicast messages */
00501 #define IW_POWER_MULTICAST_R    0x0200  /* Receive only multicast messages */
00502 #define IW_POWER_ALL_R          0x0300  /* Receive all messages though PM */
00503 #define IW_POWER_FORCE_S        0x0400  /* Force PM procedure for sending unicast */
00504 #define IW_POWER_REPEATER       0x0800  /* Repeat broadcast messages in PM period */
00505 #define IW_POWER_MODIFIER       0x000F  /* Modify a parameter */
00506 #define IW_POWER_MIN            0x0001  /* Value is a minimum  */
00507 #define IW_POWER_MAX            0x0002  /* Value is a maximum */
00508 #define IW_POWER_RELATIVE       0x0004  /* Value is not in seconds/ms/us */
00509 
00510 /* Transmit Power flags available */
00511 #define IW_TXPOW_TYPE           0x00FF  /* Type of value */
00512 #define IW_TXPOW_DBM            0x0000  /* Value is in dBm */
00513 #define IW_TXPOW_MWATT          0x0001  /* Value is in mW */
00514 #define IW_TXPOW_RELATIVE       0x0002  /* Value is in arbitrary units */
00515 #define IW_TXPOW_RANGE          0x1000  /* Range of value between min/max */
00516 
00517 /* Retry limits and lifetime flags available */
00518 #define IW_RETRY_ON             0x0000  /* No details... */
00519 #define IW_RETRY_TYPE           0xF000  /* Type of parameter */
00520 #define IW_RETRY_LIMIT          0x1000  /* Maximum number of retries*/
00521 #define IW_RETRY_LIFETIME       0x2000  /* Maximum duration of retries in us */
00522 #define IW_RETRY_MODIFIER       0x000F  /* Modify a parameter */
00523 #define IW_RETRY_MIN            0x0001  /* Value is a minimum  */
00524 #define IW_RETRY_MAX            0x0002  /* Value is a maximum */
00525 #define IW_RETRY_RELATIVE       0x0004  /* Value is not in seconds/ms/us */
00526 
00527 /* Scanning request flags */
00528 #define IW_SCAN_DEFAULT         0x0000  /* Default scan of the driver */
00529 #define IW_SCAN_ALL_ESSID       0x0001  /* Scan all ESSIDs */
00530 #define IW_SCAN_THIS_ESSID      0x0002  /* Scan only this ESSID */
00531 #define IW_SCAN_ALL_FREQ        0x0004  /* Scan all Frequencies */
00532 #define IW_SCAN_THIS_FREQ       0x0008  /* Scan only this Frequency */
00533 #define IW_SCAN_ALL_MODE        0x0010  /* Scan all Modes */
00534 #define IW_SCAN_THIS_MODE       0x0020  /* Scan only this Mode */
00535 #define IW_SCAN_ALL_RATE        0x0040  /* Scan all Bit-Rates */
00536 #define IW_SCAN_THIS_RATE       0x0080  /* Scan only this Bit-Rate */
00537 /* struct iw_scan_req scan_type */
00538 #define IW_SCAN_TYPE_ACTIVE 0
00539 #define IW_SCAN_TYPE_PASSIVE 1
00540 /* Maximum size of returned data */
00541 #define IW_SCAN_MAX_DATA        4096    /* In bytes */
00542 
00543 /* Max number of char in custom event - use multiple of them if needed */
00544 #define IW_CUSTOM_MAX           256     /* In bytes */
00545 
00546 /* Generic information element */
00547 #define IW_GENERIC_IE_MAX       1024
00548 
00549 /* MLME requests (SIOCSIWMLME / struct iw_mlme) */
00550 #define IW_MLME_DEAUTH          0
00551 #define IW_MLME_DISASSOC        1
00552 
00553 /* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
00554 #define IW_AUTH_INDEX           0x0FFF
00555 #define IW_AUTH_FLAGS           0xF000
00556 /* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
00557  * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
00558  * parameter that is being set/get to; value will be read/written to
00559  * struct iw_param value field) */
00560 #define IW_AUTH_WPA_VERSION             0
00561 #define IW_AUTH_CIPHER_PAIRWISE         1
00562 #define IW_AUTH_CIPHER_GROUP            2
00563 #define IW_AUTH_KEY_MGMT                3
00564 #define IW_AUTH_TKIP_COUNTERMEASURES    4
00565 #define IW_AUTH_DROP_UNENCRYPTED        5
00566 #define IW_AUTH_80211_AUTH_ALG          6
00567 #define IW_AUTH_WPA_ENABLED             7
00568 #define IW_AUTH_RX_UNENCRYPTED_EAPOL    8
00569 #define IW_AUTH_ROAMING_CONTROL         9
00570 #define IW_AUTH_PRIVACY_INVOKED         10
00571 #define IW_AUTH_CIPHER_GROUP_MGMT       11
00572 #define IW_AUTH_MFP                     12
00573 
00574 /* IW_AUTH_WPA_VERSION values (bit field) */
00575 #define IW_AUTH_WPA_VERSION_DISABLED    0x00000001
00576 #define IW_AUTH_WPA_VERSION_WPA         0x00000002
00577 #define IW_AUTH_WPA_VERSION_WPA2        0x00000004
00578 
00579 /* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
00580 #define IW_AUTH_CIPHER_NONE     0x00000001
00581 #define IW_AUTH_CIPHER_WEP40    0x00000002
00582 #define IW_AUTH_CIPHER_TKIP     0x00000004
00583 #define IW_AUTH_CIPHER_CCMP     0x00000008
00584 #define IW_AUTH_CIPHER_WEP104   0x00000010
00585 
00586 /* IW_AUTH_KEY_MGMT values (bit field) */
00587 #define IW_AUTH_KEY_MGMT_802_1X 1
00588 #define IW_AUTH_KEY_MGMT_PSK    2
00589 
00590 /* IW_AUTH_80211_AUTH_ALG values (bit field) */
00591 #define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
00592 #define IW_AUTH_ALG_SHARED_KEY  0x00000002
00593 #define IW_AUTH_ALG_LEAP        0x00000004
00594 
00595 /* IW_AUTH_ROAMING_CONTROL values */
00596 #define IW_AUTH_ROAMING_ENABLE  0       /* driver/firmware based roaming */
00597 #define IW_AUTH_ROAMING_DISABLE 1       /* user space program used for roaming
00598                                          * control */
00599 
00600 /* IW_AUTH_MFP (management frame protection) values */
00601 #define IW_AUTH_MFP_DISABLED    0       /* MFP disabled */
00602 #define IW_AUTH_MFP_OPTIONAL    1       /* MFP optional */
00603 #define IW_AUTH_MFP_REQUIRED    2       /* MFP required */
00604 
00605 /* SIOCSIWENCODEEXT definitions */
00606 #define IW_ENCODE_SEQ_MAX_SIZE  8
00607 /* struct iw_encode_ext ->alg */
00608 #define IW_ENCODE_ALG_NONE      0
00609 #define IW_ENCODE_ALG_WEP       1
00610 #define IW_ENCODE_ALG_TKIP      2
00611 #define IW_ENCODE_ALG_CCMP      3
00612 #define IW_ENCODE_ALG_PMK       4
00613 #define IW_ENCODE_ALG_AES_CMAC  5
00614 /* struct iw_encode_ext ->ext_flags */
00615 #define IW_ENCODE_EXT_TX_SEQ_VALID      0x00000001
00616 #define IW_ENCODE_EXT_RX_SEQ_VALID      0x00000002
00617 #define IW_ENCODE_EXT_GROUP_KEY         0x00000004
00618 #define IW_ENCODE_EXT_SET_TX_KEY        0x00000008
00619 
00620 /* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
00621 #define IW_MICFAILURE_KEY_ID    0x00000003 /* Key ID 0..3 */
00622 #define IW_MICFAILURE_GROUP     0x00000004
00623 #define IW_MICFAILURE_PAIRWISE  0x00000008
00624 #define IW_MICFAILURE_STAKEY    0x00000010
00625 #define IW_MICFAILURE_COUNT     0x00000060 /* 1 or 2 (0 = count not supported)
00626                                             */
00627 
00628 /* Bit field values for enc_capa in struct iw_range */
00629 #define IW_ENC_CAPA_WPA         0x00000001
00630 #define IW_ENC_CAPA_WPA2        0x00000002
00631 #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
00632 #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
00633 #define IW_ENC_CAPA_4WAY_HANDSHAKE      0x00000010
00634 
00635 /* Event capability macros - in (struct iw_range *)->event_capa
00636  * Because we have more than 32 possible events, we use an array of
00637  * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
00638 #define IW_EVENT_CAPA_BASE(cmd)         ((cmd >= SIOCIWFIRSTPRIV) ? \
00639                                          (cmd - SIOCIWFIRSTPRIV + 0x60) : \
00640                                          (cmd - SIOCSIWCOMMIT))
00641 #define IW_EVENT_CAPA_INDEX(cmd)        (IW_EVENT_CAPA_BASE(cmd) >> 5)
00642 #define IW_EVENT_CAPA_MASK(cmd)         (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
00643 /* Event capability constants - event autogenerated by the kernel
00644  * This list is valid for most 802.11 devices, customise as needed... */
00645 #define IW_EVENT_CAPA_K_0       (IW_EVENT_CAPA_MASK(0x8B04) | \
00646                                  IW_EVENT_CAPA_MASK(0x8B06) | \
00647                                  IW_EVENT_CAPA_MASK(0x8B1A))
00648 #define IW_EVENT_CAPA_K_1       (IW_EVENT_CAPA_MASK(0x8B2A))
00649 /* "Easy" macro to set events in iw_range (less efficient) */
00650 #define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
00651 #define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
00652 
00653 
00654 /****************************** TYPES ******************************/
00655 
00656 /* --------------------------- SUBTYPES --------------------------- */
00657 /*
00658  *      Generic format for most parameters that fit in an int
00659  */
00660 struct  iw_param
00661 {
00662   __s32         value;          /* The value of the parameter itself */
00663   __u8          fixed;          /* Hardware should not use auto select */
00664   __u8          disabled;       /* Disable the feature */
00665   __u16         flags;          /* Various specifc flags (if any) */
00666 };
00667 
00668 /*
00669  *      For all data larger than 16 octets, we need to use a
00670  *      pointer to memory allocated in user space.
00671  */
00672 struct  iw_point
00673 {
00674   void __user   *pointer;       /* Pointer to the data  (in user space) */
00675   __u16         length;         /* number of fields or size in bytes */
00676   __u16         flags;          /* Optional params */
00677 };
00678 
00679 /*
00680  *      A frequency
00681  *      For numbers lower than 10^9, we encode the number in 'm' and
00682  *      set 'e' to 0
00683  *      For number greater than 10^9, we divide it by the lowest power
00684  *      of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
00685  *      The power of 10 is in 'e', the result of the division is in 'm'.
00686  */
00687 struct  iw_freq
00688 {
00689         __s32           m;              /* Mantissa */
00690         __s16           e;              /* Exponent */
00691         __u8            i;              /* List index (when in range struct) */
00692         __u8            flags;          /* Flags (fixed/auto) */
00693 };
00694 
00695 /*
00696  *      Quality of the link
00697  */
00698 struct  iw_quality
00699 {
00700         __u8            qual;           /* link quality (%retries, SNR,
00701                                            %missed beacons or better...) */
00702         __u8            level;          /* signal level (dBm) */
00703         __u8            noise;          /* noise level (dBm) */
00704         __u8            updated;        /* Flags to know if updated */
00705 };
00706 
00707 /*
00708  *      Packet discarded in the wireless adapter due to
00709  *      "wireless" specific problems...
00710  *      Note : the list of counter and statistics in net_device_stats
00711  *      is already pretty exhaustive, and you should use that first.
00712  *      This is only additional stats...
00713  */
00714 struct  iw_discarded
00715 {
00716         __u32           nwid;           /* Rx : Wrong nwid/essid */
00717         __u32           code;           /* Rx : Unable to code/decode (WEP) */
00718         __u32           fragment;       /* Rx : Can't perform MAC reassembly */
00719         __u32           retries;        /* Tx : Max MAC retries num reached */
00720         __u32           misc;           /* Others cases */
00721 };
00722 
00723 /*
00724  *      Packet/Time period missed in the wireless adapter due to
00725  *      "wireless" specific problems...
00726  */
00727 struct  iw_missed
00728 {
00729         __u32           beacon;         /* Missed beacons/superframe */
00730 };
00731 
00732 /*
00733  *      Quality range (for spy threshold)
00734  */
00735 struct  iw_thrspy
00736 {
00737         struct sockaddr         addr;           /* Source address (hw/mac) */
00738         struct iw_quality       qual;           /* Quality of the link */
00739         struct iw_quality       low;            /* Low threshold */
00740         struct iw_quality       high;           /* High threshold */
00741 };
00742 
00743 /*
00744  *      Optional data for scan request
00745  *
00746  *      Note: these optional parameters are controlling parameters for the
00747  *      scanning behavior, these do not apply to getting scan results
00748  *      (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
00749  *      provide a merged results with all BSSes even if the previous scan
00750  *      request limited scanning to a subset, e.g., by specifying an SSID.
00751  *      Especially, scan results are required to include an entry for the
00752  *      current BSS if the driver is in Managed mode and associated with an AP.
00753  */
00754 struct  iw_scan_req
00755 {
00756         __u8            scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
00757         __u8            essid_len;
00758         __u8            num_channels; /* num entries in channel_list;
00759                                        * 0 = scan all allowed channels */
00760         __u8            flags; /* reserved as padding; use zero, this may
00761                                 * be used in the future for adding flags
00762                                 * to request different scan behavior */
00763         struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
00764                                 * individual address of a specific BSS */
00765 
00766         /*
00767          * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
00768          * the current ESSID. This allows scan requests for specific ESSID
00769          * without having to change the current ESSID and potentially breaking
00770          * the current association.
00771          */
00772         __u8            essid[IW_ESSID_MAX_SIZE];
00773 
00774         /*
00775          * Optional parameters for changing the default scanning behavior.
00776          * These are based on the MLME-SCAN.request from IEEE Std 802.11.
00777          * TU is 1.024 ms. If these are set to 0, driver is expected to use
00778          * reasonable default values. min_channel_time defines the time that
00779          * will be used to wait for the first reply on each channel. If no
00780          * replies are received, next channel will be scanned after this. If
00781          * replies are received, total time waited on the channel is defined by
00782          * max_channel_time.
00783          */
00784         __u32           min_channel_time; /* in TU */
00785         __u32           max_channel_time; /* in TU */
00786 
00787         struct iw_freq  channel_list[IW_MAX_FREQUENCIES];
00788 };
00789 
00790 /* ------------------------- WPA SUPPORT ------------------------- */
00791 
00792 /*
00793  *      Extended data structure for get/set encoding (this is used with
00794  *      SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
00795  *      flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
00796  *      only the data contents changes (key data -> this structure, including
00797  *      key data).
00798  *
00799  *      If the new key is the first group key, it will be set as the default
00800  *      TX key. Otherwise, default TX key index is only changed if
00801  *      IW_ENCODE_EXT_SET_TX_KEY flag is set.
00802  *
00803  *      Key will be changed with SIOCSIWENCODEEXT in all cases except for
00804  *      special "change TX key index" operation which is indicated by setting
00805  *      key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
00806  *
00807  *      tx_seq/rx_seq are only used when respective
00808  *      IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
00809  *      TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
00810  *      TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
00811  *      used only by an Authenticator (AP or an IBSS station) to get the
00812  *      current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
00813  *      RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
00814  *      debugging/testing.
00815  */
00816 struct  iw_encode_ext
00817 {
00818         __u32           ext_flags; /* IW_ENCODE_EXT_* */
00819         __u8            tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
00820         __u8            rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
00821         struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
00822                                * (group) keys or unicast address for
00823                                * individual keys */
00824         __u16           alg; /* IW_ENCODE_ALG_* */
00825         __u16           key_len;
00826         __u8            key[0];
00827 };
00828 
00829 /* SIOCSIWMLME data */
00830 struct  iw_mlme
00831 {
00832         __u16           cmd; /* IW_MLME_* */
00833         __u16           reason_code;
00834         struct sockaddr addr;
00835 };
00836 
00837 /* SIOCSIWPMKSA data */
00838 #define IW_PMKSA_ADD            1
00839 #define IW_PMKSA_REMOVE         2
00840 #define IW_PMKSA_FLUSH          3
00841 
00842 #define IW_PMKID_LEN    16
00843 
00844 struct  iw_pmksa
00845 {
00846         __u32           cmd; /* IW_PMKSA_* */
00847         struct sockaddr bssid;
00848         __u8            pmkid[IW_PMKID_LEN];
00849 };
00850 
00851 /* IWEVMICHAELMICFAILURE data */
00852 struct  iw_michaelmicfailure
00853 {
00854         __u32           flags;
00855         struct sockaddr src_addr;
00856         __u8            tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
00857 };
00858 
00859 /* IWEVPMKIDCAND data */
00860 #define IW_PMKID_CAND_PREAUTH   0x00000001 /* RNS pre-authentication enabled */
00861 struct  iw_pmkid_cand
00862 {
00863         __u32           flags; /* IW_PMKID_CAND_* */
00864         __u32           index; /* the smaller the index, the higher the
00865                                 * priority */
00866         struct sockaddr bssid;
00867 };
00868 
00869 /* ------------------------ WIRELESS STATS ------------------------ */
00870 /*
00871  * Wireless statistics (used for /proc/net/wireless)
00872  */
00873 struct  iw_statistics
00874 {
00875         __u16           status;         /* Status
00876                                          * - device dependent for now */
00877 
00878         struct iw_quality       qual;           /* Quality of the link
00879                                                  * (instant/mean/max) */
00880         struct iw_discarded     discard;        /* Packet discarded counts */
00881         struct iw_missed        miss;           /* Packet missed counts */
00882 };
00883 
00884 /* ------------------------ IOCTL REQUEST ------------------------ */
00885 /*
00886  * This structure defines the payload of an ioctl, and is used 
00887  * below.
00888  *
00889  * Note that this structure should fit on the memory footprint
00890  * of iwreq (which is the same as ifreq), which mean a max size of
00891  * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
00892  * You should check this when increasing the structures defined
00893  * above in this file...
00894  */
00895 union   iwreq_data
00896 {
00897         /* Config - generic */
00898         char            name[IFNAMSIZ];
00899         /* Name : used to verify the presence of  wireless extensions.
00900          * Name of the protocol/provider... */
00901 
00902         struct iw_point essid;          /* Extended network name */
00903         struct iw_param nwid;           /* network id (or domain - the cell) */
00904         struct iw_freq  freq;           /* frequency or channel :
00905                                          * 0-1000 = channel
00906                                          * > 1000 = frequency in Hz */
00907 
00908         struct iw_param sens;           /* signal level threshold */
00909         struct iw_param bitrate;        /* default bit rate */
00910         struct iw_param txpower;        /* default transmit power */
00911         struct iw_param rts;            /* RTS threshold threshold */
00912         struct iw_param frag;           /* Fragmentation threshold */
00913         __u32           mode;           /* Operation mode */
00914         struct iw_param retry;          /* Retry limits & lifetime */
00915 
00916         struct iw_point encoding;       /* Encoding stuff : tokens */
00917         struct iw_param power;          /* PM duration/timeout */
00918         struct iw_quality qual;         /* Quality part of statistics */
00919 
00920         struct sockaddr ap_addr;        /* Access point address */
00921         struct sockaddr addr;           /* Destination address (hw/mac) */
00922 
00923         struct iw_param param;          /* Other small parameters */
00924         struct iw_point data;           /* Other large parameters */
00925 };
00926 
00927 /*
00928  * The structure to exchange data for ioctl.
00929  * This structure is the same as 'struct ifreq', but (re)defined for
00930  * convenience...
00931  * Do I need to remind you about structure size (32 octets) ?
00932  */
00933 struct  iwreq 
00934 {
00935         union
00936         {
00937                 char    ifrn_name[IFNAMSIZ];    /* if name, e.g. "eth0" */
00938         } ifr_ifrn;
00939 
00940         /* Data part (defined just above) */
00941         union   iwreq_data      u;
00942 };
00943 
00944 /* -------------------------- IOCTL DATA -------------------------- */
00945 /*
00946  *      For those ioctl which want to exchange mode data that what could
00947  *      fit in the above structure...
00948  */
00949 
00950 /*
00951  *      Range of parameters
00952  */
00953 
00954 struct  iw_range
00955 {
00956         /* Informative stuff (to choose between different interface) */
00957         __u32           throughput;     /* To give an idea... */
00958         /* In theory this value should be the maximum benchmarked
00959          * TCP/IP throughput, because with most of these devices the
00960          * bit rate is meaningless (overhead an co) to estimate how
00961          * fast the connection will go and pick the fastest one.
00962          * I suggest people to play with Netperf or any benchmark...
00963          */
00964 
00965         /* NWID (or domain id) */
00966         __u32           min_nwid;       /* Minimal NWID we are able to set */
00967         __u32           max_nwid;       /* Maximal NWID we are able to set */
00968 
00969         /* Old Frequency (backward compat - moved lower ) */
00970         __u16           old_num_channels;
00971         __u8            old_num_frequency;
00972 
00973         /* Wireless event capability bitmasks */
00974         __u32           event_capa[6];
00975 
00976         /* signal level threshold range */
00977         __s32           sensitivity;
00978 
00979         /* Quality of link & SNR stuff */
00980         /* Quality range (link, level, noise)
00981          * If the quality is absolute, it will be in the range [0 ; max_qual],
00982          * if the quality is dBm, it will be in the range [max_qual ; 0].
00983          * Don't forget that we use 8 bit arithmetics... */
00984         struct iw_quality       max_qual;       /* Quality of the link */
00985         /* This should contain the average/typical values of the quality
00986          * indicator. This should be the threshold between a "good" and
00987          * a "bad" link (example : monitor going from green to orange).
00988          * Currently, user space apps like quality monitors don't have any
00989          * way to calibrate the measurement. With this, they can split
00990          * the range between 0 and max_qual in different quality level
00991          * (using a geometric subdivision centered on the average).
00992          * I expect that people doing the user space apps will feedback
00993          * us on which value we need to put in each driver... */
00994         struct iw_quality       avg_qual;       /* Quality of the link */
00995 
00996         /* Rates */
00997         __u8            num_bitrates;   /* Number of entries in the list */
00998         __s32           bitrate[IW_MAX_BITRATES];       /* list, in bps */
00999 
01000         /* RTS threshold */
01001         __s32           min_rts;        /* Minimal RTS threshold */
01002         __s32           max_rts;        /* Maximal RTS threshold */
01003 
01004         /* Frag threshold */
01005         __s32           min_frag;       /* Minimal frag threshold */
01006         __s32           max_frag;       /* Maximal frag threshold */
01007 
01008         /* Power Management duration & timeout */
01009         __s32           min_pmp;        /* Minimal PM period */
01010         __s32           max_pmp;        /* Maximal PM period */
01011         __s32           min_pmt;        /* Minimal PM timeout */
01012         __s32           max_pmt;        /* Maximal PM timeout */
01013         __u16           pmp_flags;      /* How to decode max/min PM period */
01014         __u16           pmt_flags;      /* How to decode max/min PM timeout */
01015         __u16           pm_capa;        /* What PM options are supported */
01016 
01017         /* Encoder stuff */
01018         __u16   encoding_size[IW_MAX_ENCODING_SIZES];   /* Different token sizes */
01019         __u8    num_encoding_sizes;     /* Number of entry in the list */
01020         __u8    max_encoding_tokens;    /* Max number of tokens */
01021         /* For drivers that need a "login/passwd" form */
01022         __u8    encoding_login_index;   /* token index for login token */
01023 
01024         /* Transmit power */
01025         __u16           txpower_capa;   /* What options are supported */
01026         __u8            num_txpower;    /* Number of entries in the list */
01027         __s32           txpower[IW_MAX_TXPOWER];        /* list, in bps */
01028 
01029         /* Wireless Extension version info */
01030         __u8            we_version_compiled;    /* Must be WIRELESS_EXT */
01031         __u8            we_version_source;      /* Last update of source */
01032 
01033         /* Retry limits and lifetime */
01034         __u16           retry_capa;     /* What retry options are supported */
01035         __u16           retry_flags;    /* How to decode max/min retry limit */
01036         __u16           r_time_flags;   /* How to decode max/min retry life */
01037         __s32           min_retry;      /* Minimal number of retries */
01038         __s32           max_retry;      /* Maximal number of retries */
01039         __s32           min_r_time;     /* Minimal retry lifetime */
01040         __s32           max_r_time;     /* Maximal retry lifetime */
01041 
01042         /* Frequency */
01043         __u16           num_channels;   /* Number of channels [0; num - 1] */
01044         __u8            num_frequency;  /* Number of entry in the list */
01045         struct iw_freq  freq[IW_MAX_FREQUENCIES];       /* list */
01046         /* Note : this frequency list doesn't need to fit channel numbers,
01047          * because each entry contain its channel index */
01048 
01049         __u32           enc_capa; /* IW_ENC_CAPA_* bit field */
01050 };
01051 
01052 /*
01053  * Private ioctl interface information
01054  */
01055  
01056 struct  iw_priv_args
01057 {
01058         __u32           cmd;            /* Number of the ioctl to issue */
01059         __u16           set_args;       /* Type and number of args */
01060         __u16           get_args;       /* Type and number of args */
01061         char            name[IFNAMSIZ]; /* Name of the extension */
01062 };
01063 
01064 /* ----------------------- WIRELESS EVENTS ----------------------- */
01065 /*
01066  * Wireless events are carried through the rtnetlink socket to user
01067  * space. They are encapsulated in the IFLA_WIRELESS field of
01068  * a RTM_NEWLINK message.
01069  */
01070 
01071 /*
01072  * A Wireless Event. Contains basically the same data as the ioctl...
01073  */
01074 struct iw_event
01075 {
01076         __u16           len;                    /* Real lenght of this stuff */
01077         __u16           cmd;                    /* Wireless IOCTL */
01078         union iwreq_data        u;              /* IOCTL fixed payload */
01079 };
01080 
01081 /* Size of the Event prefix (including padding and alignement junk) */
01082 #define IW_EV_LCP_LEN   (sizeof(struct iw_event) - sizeof(union iwreq_data))
01083 /* Size of the various events */
01084 #define IW_EV_CHAR_LEN  (IW_EV_LCP_LEN + IFNAMSIZ)
01085 #define IW_EV_UINT_LEN  (IW_EV_LCP_LEN + sizeof(__u32))
01086 #define IW_EV_FREQ_LEN  (IW_EV_LCP_LEN + sizeof(struct iw_freq))
01087 #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
01088 #define IW_EV_ADDR_LEN  (IW_EV_LCP_LEN + sizeof(struct sockaddr))
01089 #define IW_EV_QUAL_LEN  (IW_EV_LCP_LEN + sizeof(struct iw_quality))
01090 
01091 /* iw_point events are special. First, the payload (extra data) come at
01092  * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
01093  * we omit the pointer, so start at an offset. */
01094 #define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
01095                           (char *) NULL)
01096 #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
01097                          IW_EV_POINT_OFF)
01098 
01099 #endif  /* _LINUX_WIRELESS_H */


wpa_supplicant_node
Author(s): Package maintained by Blaise Gassend
autogenerated on Thu Jan 2 2014 11:25:15