pedal_mode_switcher.py
Go to the documentation of this file.
00001 #! /usr/bin/env python
00002 # Copyright (c) 2009, Willow Garage, Inc.
00003 # All rights reserved.
00004 # 
00005 # Redistribution and use in source and binary forms, with or without
00006 # modification, are permitted provided that the following conditions are met:
00007 # 
00008 #     * Redistributions of source code must retain the above copyright
00009 #       notice, this list of conditions and the following disclaimer.
00010 #     * Redistributions in binary form must reproduce the above copyright
00011 #       notice, this list of conditions and the following disclaimer in the
00012 #       documentation and/or other materials provided with the distribution.
00013 #     * Neither the name of the Willow Garage, Inc. nor the names of its
00014 #       contributors may be used to endorse or promote products derived from
00015 #       this software without specific prior written permission.
00016 # 
00017 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00018 # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00019 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
00020 # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
00021 # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
00022 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
00023 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
00024 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
00025 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
00026 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
00027 # POSSIBILITY OF SUCH DAMAGE.
00028 
00029 
00030 import roslib
00031 roslib.load_manifest('teleop_microscribe')
00032 import rospy
00033 from joy.msg import *
00034 from pr2_controllers_msgs.msg import *
00035 from trajectory_msgs.msg import *
00036 from pr2_cockpit_msgs.srv import *
00037 
00038 rospy.init_node('pedal_mode_switcher')
00039 
00040 HEAD_PEDALS = 'head_pedals'
00041 DRIVE_PEDALS = 'drive_pedals'
00042 
00043 enabled = [HEAD_PEDALS]
00044 all = {}
00045 
00046 def send():
00047     global all, enabled
00048     for k, v in all.items():
00049         req = k in enabled
00050         print "Setting", k, "to", req
00051         try:
00052             v.call(req)
00053         except rospy.ServiceException, ex:
00054             print ex
00055 
00056 def pedal_cb(msg):
00057     global enabled
00058     if msg.buttons[0]:
00059         enabled = [HEAD_PEDALS]
00060     elif msg.buttons[1]:
00061         enabled = [DRIVE_PEDALS]
00062 
00063     print "Enabled:", enabled
00064     send()
00065 
00066 def setup():
00067     global all, enabled
00068     all[HEAD_PEDALS] = rospy.ServiceProxy('/head_pedals/enable', Enable)
00069     all[DRIVE_PEDALS] = rospy.ServiceProxy('/teleop_base_pedals/enable', Enable)
00070     rospy.Subscriber('/l_pedals/joy', Joy, pedal_cb)
00071     send()
00072     
00073 def main():
00074     rate = rospy.Rate(1.0)
00075     setup()
00076     while not rospy.is_shutdown():
00077         send()
00078         rate.sleep()
00079 
00080     
00081 if __name__ == '__main__':
00082     main()


teleop_microscribe
Author(s): Stuart Glaser
autogenerated on Sat Dec 28 2013 17:24:30