Different update rates for Hardware Components

In the following sections you can find some advice which will help you to implement Hardware Components with update rates different from the main control loop.

By counting loops

Current implementation of ros2_control main node has one update rate that controls the rate of the read(…) and write(…) calls in hardware_interface(s). To achieve different update rates for your hardware component you can use the following steps:

  1. Add parameters of main control loop update rate and desired update rate for your hardware component

<?xml version="1.0"?>
<robot xmlns:xacro="http://www.ros.org/wiki/xacro">

  <xacro:macro name="system_interface" params="name main_loop_update_rate desired_hw_update_rate">

    <ros2_control name="${name}" type="system">
      <hardware>
          <plugin>my_system_interface/MySystemHardware</plugin>
          <param name="main_loop_update_rate">${main_loop_update_rate}</param>
          <param name="desired_hw_update_rate">${desired_hw_update_rate}</param>
      </hardware>
      ...
    </ros2_control>

  </xacro:macro>

</robot>
  1. In you on_init() specific implementation fetch the desired parameters

namespace my_system_interface
{
hardware_interface::CallbackReturn MySystemHardware::on_init(
  const hardware_interface::HardwareInfo & info)
{
  if (
    hardware_interface::SystemInterface::on_init(info) !=
    hardware_interface::CallbackReturn::SUCCESS)
  {
    return hardware_interface::CallbackReturn::ERROR;
  }

  //   declaration in *.hpp file --> unsigned int main_loop_update_rate_, desired_hw_update_rate_ = 100 ;
  main_loop_update_rate_ = stoi(info_.hardware_parameters["main_loop_update_rate"]);
  desired_hw_update_rate_ = stoi(info_.hardware_parameters["desired_hw_update_rate"]);

  ...
}
...
} // my_system_interface
  1. In your on_activate specific implementation reset internal loop counter

hardware_interface::CallbackReturn MySystemHardware::on_activate(
  const rclcpp_lifecycle::State & /*previous_state*/)
{
    //   declaration in *.hpp file --> unsigned int update_loop_counter_ ;
    update_loop_counter_ = 0;
    ...
}
  1. In your read(const rclcpp::Time & time, const rclcpp::Duration & period) and/or write(const rclcpp::Time & time, const rclcpp::Duration & period) specific implementations decide if you should interfere with your hardware

hardware_interface::return_type MySystemHardware::read(const rclcpp::Time & time, const rclcpp::Duration & period)
{

  bool hardware_go = main_loop_update_rate_ == 0  ||
                    desired_hw_update_rate_ == 0 ||
                    ((update_loop_counter_ % desired_hw_update_rate_) == 0);

  if (hardware_go){
    // hardware comms and operations
    ...
  }
  ...

  // update counter
  ++update_loop_counter_;
  update_loop_counter_ %= main_loop_update_rate_;
}

By measuring elapsed time

Another way to decide if hardware communication should be executed in the read(const rclcpp::Time & time, const rclcpp::Duration & period) and/or write(const rclcpp::Time & time, const rclcpp::Duration & period) implementations is to measure elapsed time since last pass:

  1. In your on_activate specific implementation reset the flags that indicate that this is the first pass of the read and write methods

hardware_interface::CallbackReturn MySystemHardware::on_activate(
  const rclcpp_lifecycle::State & /*previous_state*/)
{
    //   declaration in *.hpp file --> bool first_read_pass_, first_write_pass_ = true ;
    first_read_pass_ = first_write_pass_ = true;
    ...
}
  1. In your read(const rclcpp::Time & time, const rclcpp::Duration & period) and/or write(const rclcpp::Time & time, const rclcpp::Duration & period) specific implementations decide if you should interfere with your hardware

    hardware_interface::return_type MySystemHardware::read(const rclcpp::Time & time, const rclcpp::Duration & period)
    {
        if (first_read_pass_ || (time - last_read_time_ ) > desired_hw_update_period_)
        {
          first_read_pass_ = false;
          //   declaration in *.hpp file --> rclcpp::Time last_read_time_ ;
          last_read_time_ = time;
          // hardware comms and operations
          ...
        }
        ...
    }
    
    hardware_interface::return_type MySystemHardware::write(const rclcpp::Time & time, const rclcpp::Duration & period)
    {
        if (first_write_pass_ || (time - last_write_time_ ) > desired_hw_update_period_)
        {
          first_write_pass_ = false;
          //   declaration in *.hpp file --> rclcpp::Time last_write_time_ ;
          last_write_time_ = time;
          // hardware comms and operations
          ...
        }
        ...
    }
    

Note

The approach to get the desired update period value from the URDF and assign it to the variable desired_hw_update_period_ is the same as in the previous section (step 1 and step 2) but with a different parameter name.