PRO

This is a ROS message definition.

Source

# This message is compatible with control table of Dynamixel PRO L42-10-S300-R
# If you want to specific information about control table, please follow the link (http://emanual.robotis.com/)

uint16 model_number
uint8  firmware_version
uint8  model_id
uint8  baud_rate
uint8  return_delay_time
uint8  operating_mode
uint32 moving_threshold
uint8  temperature_limit
uint16 max_voltage_limit
uint16 min_voltage_limit
uint32 acceleration_limit
uint16 torque_limit
uint32 velocity_limit
int32  max_position_limit
int32  min_position_limit
uint8  external_port_mode_1
uint8  external_port_mode_2
uint8  external_port_mode_3
uint8  external_port_mode_4
uint8  shutdown

uint8  torque_enable
uint8  led_red
uint8  led_green
uint8  led_blue
uint16 velocity_i_gain
uint16 velocity_p_gain
uint16 position_p_gain
int32  goal_position
uint32 goal_velocity
uint16 goal_torque
int32  goal_acceleration
uint8  moving
int32  present_position
uint32 present_velocity
uint16 present_current
uint16 present_input_voltage
uint8  present_temperature
uint8  registered_instruction
uint8  status_return_level
uint8  hardware_error_status