Feedback

This is a ROS message definition.

Source

# Number on the bus (CAN ID).
uint8 device_number

# Name of joint controlled, or other identifier.
string device_name

# Duty cycle of the h-bridge driver (-1..1).
float32 duty_cycle

# Current consumed (amps).
float32 current

# Travel as measured by the encoder (rad).
float64 travel

# Angular velocity as measured by the encoder (rad/s).
float64 speed

# The reported setpoint value of the on-board controller for the given mode.
# In voltage control, duty cycle of the h-bridge driver (-1..1).
# In speed control, angular velocity setpoint of the on-board controller (rad/s).
# In position control, travel as measured by the encoder (rad).
# In current control, the current consumed (amps).
float64 setpoint