vl53l1_error_strings.h
Go to the documentation of this file.
1 /*
2 * Copyright (c) 2017, STMicroelectronics - All Rights Reserved
3 *
4 * This file is part of VL53L1 Core and is dual licensed,
5 * either 'STMicroelectronics
6 * Proprietary license'
7 * or 'BSD 3-clause "New" or "Revised" License' , at your option.
8 *
9 ********************************************************************************
10 *
11 * 'STMicroelectronics Proprietary license'
12 *
13 ********************************************************************************
14 *
15 * License terms: STMicroelectronics Proprietary in accordance with licensing
16 * terms at www.st.com/sla0081
17 *
18 * STMicroelectronics confidential
19 * Reproduction and Communication of this document is strictly prohibited unless
20 * specifically authorized in writing by STMicroelectronics.
21 *
22 *
23 ********************************************************************************
24 *
25 * Alternatively, VL53L1 Core may be distributed under the terms of
26 * 'BSD 3-clause "New" or "Revised" License', in which case the following
27 * provisions apply instead of the ones mentioned above :
28 *
29 ********************************************************************************
30 *
31 * License terms: BSD 3-clause "New" or "Revised" License.
32 *
33 * Redistribution and use in source and binary forms, with or without
34 * modification, are permitted provided that the following conditions are met:
35 *
36 * 1. Redistributions of source code must retain the above copyright notice, this
37 * list of conditions and the following disclaimer.
38 *
39 * 2. Redistributions in binary form must reproduce the above copyright notice,
40 * this list of conditions and the following disclaimer in the documentation
41 * and/or other materials provided with the distribution.
42 *
43 * 3. Neither the name of the copyright holder nor the names of its contributors
44 * may be used to endorse or promote products derived from this software
45 * without specific prior written permission.
46 *
47 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
48 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
49 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
50 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
51 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
52 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
53 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
54 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
55 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
56 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57 *
58 *
59 ********************************************************************************
60 *
61 */
62 
70 #ifndef VL53L1_ERROR_STRINGS_H_
71 #define VL53L1_ERROR_STRINGS_H_
72 
73 #include "vl53l1_error_codes.h"
74 
75 #ifdef __cplusplus
76 extern "C" {
77 #endif
78 
79 
90 VL53L1_Error VL53L1_get_pal_error_string(
91  VL53L1_Error PalErrorCode,
92  char *pPalErrorString);
93 
94 
95 #ifndef VL53L1_USE_EMPTY_STRING
96 
97  /* PAL ERROR strings */
98  #define VL53L1_STRING_ERROR_NONE \
99  "No Error"
100  #define VL53L1_STRING_ERROR_CALIBRATION_WARNING \
101  "Calibration Warning Error"
102  #define VL53L1_STRING_ERROR_MIN_CLIPPED \
103  "Min clipped error"
104  #define VL53L1_STRING_ERROR_UNDEFINED \
105  "Undefined error"
106  #define VL53L1_STRING_ERROR_INVALID_PARAMS \
107  "Invalid parameters error"
108  #define VL53L1_STRING_ERROR_NOT_SUPPORTED \
109  "Not supported error"
110  #define VL53L1_STRING_ERROR_RANGE_ERROR \
111  "Range error"
112  #define VL53L1_STRING_ERROR_TIME_OUT \
113  "Time out error"
114  #define VL53L1_STRING_ERROR_MODE_NOT_SUPPORTED \
115  "Mode not supported error"
116  #define VL53L1_STRING_ERROR_BUFFER_TOO_SMALL \
117  "Buffer too small"
118  #define VL53L1_STRING_ERROR_COMMS_BUFFER_TOO_SMALL \
119  "Comms Buffer too small"
120  #define VL53L1_STRING_ERROR_GPIO_NOT_EXISTING \
121  "GPIO not existing"
122  #define VL53L1_STRING_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED \
123  "GPIO funct not supported"
124  #define VL53L1_STRING_ERROR_CONTROL_INTERFACE \
125  "Control Interface Error"
126  #define VL53L1_STRING_ERROR_INVALID_COMMAND \
127  "Invalid Command Error"
128  #define VL53L1_STRING_ERROR_DIVISION_BY_ZERO \
129  "Division by zero Error"
130  #define VL53L1_STRING_ERROR_REF_SPAD_INIT \
131  "Reference Spad Init Error"
132  #define VL53L1_STRING_ERROR_GPH_SYNC_CHECK_FAIL \
133  "GPH Sync Check Fail - API out of sync"
134  #define VL53L1_STRING_ERROR_STREAM_COUNT_CHECK_FAIL \
135  "Stream Count Check Fail - API out of sync"
136  #define VL53L1_STRING_ERROR_GPH_ID_CHECK_FAIL \
137  "GPH ID Check Fail - API out of sync"
138  #define VL53L1_STRING_ERROR_ZONE_STREAM_COUNT_CHECK_FAIL \
139  "Zone Stream Count Check Fail - API out of sync"
140  #define VL53L1_STRING_ERROR_ZONE_GPH_ID_CHECK_FAIL \
141  "Zone GPH ID Check Fail - API out of sync"
142 
143  #define VL53L1_STRING_ERROR_XTALK_EXTRACTION_NO_SAMPLES_FAIL \
144  "No Xtalk using full array - Xtalk Extract Fail"
145  #define VL53L1_STRING_ERROR_XTALK_EXTRACTION_SIGMA_LIMIT_FAIL \
146  "Xtalk does not meet required sigma limit - Xtalk Extract Fail"
147 
148  #define VL53L1_STRING_ERROR_OFFSET_CAL_NO_SAMPLE_FAIL \
149  "Offset Cal - one of more stages with no valid samples - fatal"
150  #define VL53L1_STRING_ERROR_OFFSET_CAL_NO_SPADS_ENABLED_FAIL \
151  "Offset Cal - one of more stages with no SPADS enables - fatal"
152  #define VL53L1_STRING_ERROR_ZONE_CAL_NO_SAMPLE_FAIL \
153  "Zone Cal - one of more zones with no valid samples - fatal"
154 
155  #define VL53L1_STRING_WARNING_REF_SPAD_CHAR_NOT_ENOUGH_SPADS \
156  "Ref SPAD Char - Not Enough Good SPADs"
157  #define VL53L1_STRING_WARNING_REF_SPAD_CHAR_RATE_TOO_HIGH \
158  "Ref SPAD Char - Final Ref Rate too high"
159  #define VL53L1_STRING_WARNING_REF_SPAD_CHAR_RATE_TOO_LOW \
160  "Ref SPAD Char - Final Ref Rate too low"
161 
162  #define VL53L1_STRING_WARNING_OFFSET_CAL_MISSING_SAMPLES \
163  "Offset Cal - Less than the requested number of valid samples"
164  #define VL53L1_STRING_WARNING_OFFSET_CAL_SIGMA_TOO_HIGH \
165  "Offset Cal - Sigma estimate value too high - offset not stable"
166  #define VL53L1_STRING_WARNING_OFFSET_CAL_RATE_TOO_HIGH \
167  "Offset Cal - Rate too high - in pile up"
168  #define VL53L1_STRING_WARNING_OFFSET_CAL_SPAD_COUNT_TOO_LOW \
169  "Offset Cal - Insufficient SPADs - offset may not be stable"
170 
171  #define VL53L1_STRING_WARNING_ZONE_CAL_MISSING_SAMPLES \
172  "Zone Cal - One or more zone with less than requested valid samples"
173  #define VL53L1_STRING_WARNING_ZONE_CAL_SIGMA_TOO_HIGH \
174  "Zone Cal - One of more zones the sigma estimate too high"
175  #define VL53L1_STRING_WARNING_ZONE_CAL_RATE_TOO_HIGH \
176  "Zone Cal - One of more zones with rate too high - in pile up"
177 
178  #define VL53L1_STRING_WARNING_XTALK_NO_SAMPLES_FOR_GRADIENT \
179  "Xtalk - Gradient sample num = 0"
180  #define VL53L1_STRING_WARNING_XTALK_SIGMA_LIMIT_FOR_GRADIENT \
181  "Xtalk - Gradient Sigma > Limit"
182  #define VL53L1_STRING_WARNING_XTALK_MISSING_SAMPLES \
183  "Xtalk - Some missing and invalid samples"
184 
185  #define VL53L1_STRING_ERROR_DEVICE_FIRMWARE_TOO_OLD \
186  "Device Firmware too old"
187  #define VL53L1_STRING_ERROR_DEVICE_FIRMWARE_TOO_NEW \
188  "Device Firmware too new"
189  #define VL53L1_STRING_ERROR_UNIT_TEST_FAIL \
190  "Unit Test Fail"
191  #define VL53L1_STRING_ERROR_FILE_READ_FAIL \
192  "File Read Fail"
193  #define VL53L1_STRING_ERROR_FILE_WRITE_FAIL \
194  "File Write Fail"
195 
196  #define VL53L1_STRING_ERROR_NOT_IMPLEMENTED \
197  "Not implemented error"
198  #define VL53L1_STRING_UNKNOW_ERROR_CODE \
199  "Unknown Error Code"
200 
201 #endif /* VL53L1_USE_EMPTY_STRING */
202 
203 
204 #ifdef __cplusplus
205 }
206 #endif
207 
208 #endif
209 
vl53l1_error_codes.h
Error Code definitions for VL53L1 API.
VL53L1_get_pal_error_string
VL53L1_Error VL53L1_get_pal_error_string(VL53L1_Error PalErrorCode, char *pPalErrorString)
Generates an error string for the input PAL error code.
Definition: vl53l1_error_strings.c:86
VL53L1_Error
int8_t VL53L1_Error
Definition: vl53l1_error_codes.h:89

vl53l1x
Author(s):
autogenerated on Fri Aug 2 2024 08:35:54